Adjust Camera Settings on Your Room System from a Touch Controller

Document created by Cisco Documentation Team on Jun 17, 2016Last modified by Cisco Documentation Team on Sep 1, 2016
Version 4Show Document
  • View in full screen mode
 

Camera Settings

 

 

The camera settings let you control the zoom, pan, and tilt of the camera. In this menu, you can also define and edit the camera position presets. To open the camera settings, tap the camera icon on the home screen.

In addition, selfview (the image that the others see from your system) can be turned on and off, and be shown minimized or maximized.



 
                  

1

Add, edit, and remove camera presets. Any saved camera presets are listed here.

2

Turn selfview on and off.

3

Pan and tilt controls.

4

Maximize and minimize selfview.

5

Open camera settings.

6

Zoom controls.

 

Camera Presets

 

 

Your room system lets you create predefined zoom and camera direction. You can create several presets for the camera that can be used in different types of meetings. You may need for example a zoomed out preset for meetings with several participants, and a zoomed in for smaller meetings. Switch easily between the different presets by selecting them from the camera settings menu.

    

Add Presets

 


        
Step 1    Tap the Camera icon to open the camera settings menu. Selfview gets activated automatically.
Step 2    Adjust tilt, pan, and zoom, as required.
Step 3    Tap Add New. Give the position a descriptive name.
Step 4    Tap Save to leave the menu putting changes into effect, or tap Cancel to leave the menu undoing any changes.
Step 5    Tap anywhere outside the menu to close it.

Edit Presets

 


         
Step 1    Tap the Camera icon to open the camera settings menu. Selfview gets activated automatically.
Step 2    Adjust tilt, pan, and zoom, as required.
Step 3    Tap the little arrowhead of the preset you want to edit.
Step 4    Tap Update to current position to put your changes into effect.
Step 5    To delete an existing preset tap Remove.
Step 6    Tap anywhere outside the menu to close it.

Room Systems with Several Cameras

 

 

If you are using a room system with more than one camera, you can adjust their positions as you would a single camera. Choose which camera you wish to adjust from the dropdown menu under the pan, tilt, and zoom controls.

To learn more about the use of automatic speaker tracking available on two camera room systems, take a look at the speaker tracking article.

    
 

Attachments

    Outcomes