The local gateway helps you migrate to Webex Calling at your own pace. The local gateway integrates your existing on-premises deployment with Webex Calling. You can also use your existing PSTN connection.

Ensure the following before configuring a Local Gateway for Webex Calling:

  • Knowledge of VoIP, such as SIP and media protocols, and the ability to perform basic troubleshooting.

  • Working understanding of the devices (session border controller) that are configured as a Local Gateway.

  • Required license to operate the session border controller.

  • Knowledge of Cisco Unified Communications Manager (Unified CM) or equivalent PBX deployed on your premises and configured to work with Webex Calling. (In the case of an integration with an on-premises environment.)

The following articles can help you familiarize with the deployment options:

Table 1. Concepts related to Cisco Local Gateway

Term

References

Trunks and Route Groups

For more information, see trunks and route groups in Webex Calling Preferred Architecture.

ByoPSTN, Enterprise Dialing

Stands for Bring Your Own PSTN. For more information, see PSTN access and on-premises interconnect in Webex Calling Preferred Architecture.

Over the Top (OTT), Webex Edge Connect

For more information, see Access Connectivity options in Webex Calling Preferred Architecture.

Local Gateway trunking models

There are two types of Local Gateway trunking models:

  • Registration-based trunks

  • Certificate-based trunks

These models provide similar functionality, but they differ in scale and device support. Select the right trunking model that meets your requirement.

Table 2. Compare trunking models for Local Gateway

Functionality

Registration-based

Certificate-based

Concurrent calls

Concurrent calls of up to 250 per trunk.

Concurrent calls of > 250 per trunk.

Device type

Supports only Cisco Unified Border Element (CUBE).

For more information, see CUBE Platform Support.

A choice of device types as mentioned in the table Device types supported for certificate based trunking.

Authentication model

Digest-based authentication model, which relies on a shared username and password used to authenticate registration and calls.

For more information, see Registration-based trunk.

Certificate-based authentication with LGW FQDN verification.

For more information, see Certificate-based trunk.

Every SIP transaction Local Gateway initiates towards Webex Calling cloud, should contain Contact header with FQDN of a Local Gateway.

OPTIONS Transactions from Local Gateway is specially important for the Local Gateway status in the Control Hub to be online.

Network, firewall, and NAT requirements

For details on ingress and egress traffic, see Port Reference Information for Cisco Webex Calling.

Any NAT or Public IP. Dynamic NAT is preferred since it’s easier for setup and requires less firewall configurations.

Requires firewall to allow both ingress and egress traffic (Webex calling to Local Gateway and vice versa).

For ingress traffic, inbound pinholes are opened by the firewall based on outbound registration messages.

Pinhole opening is recommended for all Webex Calling IP address and ports. It isn’t specific to an IP address or port to which Local Gateway registers.

Public internet-facing network including a public IP or Static NAT.

Requires firewall to allow both ingress and egress traffic (Webex Calling to Local Gateway and vice versa).

Public DNS service requirements

No specific configuration is required on a public DNS service.

  • Domain claims required. See Manage your domain.

  • A DNS A record or DNS SRV record must be configured in a public DNS server.

CA and certificate requirements

  • CA bundle that signed the Webex service’s certificate has to be uploaded to the Local Gateway.

Onboarding and troubleshooting using a cloud connector

Supports automated troubleshooting of configuration issues.

Doesn't support automated troubleshooting of configuration issues.

Supported session border controllers

Configure certificate-based trunking for Local Gateways in Webex for Government. Also, CUBE is the only session border controller (SBC) that currently supports Webex for Government.

Table 3. Registration-based

SBC vendor and model

Minimum version

Open caveats

Webex for Government

Cisco—CUBE models listed in Router platform support

Cisco IOS XE Bengaluru 17.6.1a

To configure Local Gateway in controller mode as part of a Cisco SD-WAN solution, use Cisco IOS XE Cupertino 17.7.1 or later releases.

For the recommended versions, see the Cisco Software Research page. Search for the platform and select one of the "Suggested" releases.

Cisco ISR 1100 platforms don’t support configuration validation.

For a gateway deployed in controller mode with Cisco SD-WAN, the following aren’t supported:

  • Enrolling Local Gateway to Control Hub

  • Validation of gateway configuration

Webex for Government doesn't support registration-based trunking.

Table 4. Certificate-based

SBC vendor and model

Minimum version

Open caveats

Webex for Government

Cisco—CUBE models listed in Router platform support

Cisco IOS XE Cupertino 17.9.1a

For the recommended versions, see the Cisco Software Research page. Search for the platform and select one of the "Suggested" releases.

For a gateway deployed in controller mode with Cisco SD-WAN, the following aren’t supported:

  • Enrolling Local Gateway to Control Hub

  • Validation of gateway configuration

Supported

Oracle—AP series

9.0.0

Limitation with ICE interoperability. See Section 9 in Cisco Webex - Oracle SBC integration with Cisco Webex Calling as 3rd party Local Gateway (LGW) solution documentation.

Not supported

Oracle—VME

9.0.0

Limitation with ICE interoperability. See Section 9 in Cisco Webex - Oracle SBC integration with Cisco Webex Calling as 3rd party Local Gateway (LGW) solution documentation.

Not supported

Oracle—Oracle SBC on Public Cloud

9.0.0

Limitation with ICE interoperability. See Section 9 in Cisco Webex - Oracle SBC integration with Cisco Webex Calling as 3rd party Local Gateway (LGW) solution documentation.

Not supported

AudioCodes—Mediant CE & VE

7.40A.250.440

Limitation with ICE interoperability. See Section 2.4.2 of Connecting Webex Calling with AudioCodes SBC Configuration Note.

Not supported

AudioCodes—Mediant Appliances

7.40A.250.440

Limitation with ICE interoperability. See Section 2.4.2 of Connecting Webex Calling with Audio Codes SBC Configuration Note.

Not supported

Ribbon—SBC 5000 Series, SBC 7000, and SBC SWe

10.1

Limitation with ICE interoperability. See Caveats section.

Not supported

Ribbon—SBC SWe Edge

11.0.2

Limitation with ICE interoperability. See workaround solution in Caveats section.

Not supported

Ribbon—SBC 1000, SBC 2000

11.0.1

Limitation with ICE interoperability. See workaround solution in Caveats section.

Not supported

anynode—SBC4.10

Not supported

Italtel NetMatch-S SBCNetMatch-S-CI 5.8.0-20240111For known limitations, see Section 3.3 Caveats

Not supported

Webex Calling supports the deployment of Local Gateways behind NAT. Call behavior may depend on the type of NAT firewall used in your network and the functionality provided by your SBC.

Calling capacity requirements

The Registration-based and Certificate-based trunking models have different concurrent call capacities, as shown in the following table:

Table 5. Calling capacity guidelines (per local gateway)

Concurrent call requirement)

Approximate user numbers

Trunk type Preference

Minimum link quality

~ 2000–6500

65000

Certificate-based

Interconnect

~ 250–2000

20000

Certificate-based

Over the top (OTT)

Up to 250

2500

Registration-based

OTT

Connection qualifications

An OTT and interconnect connection must meet the following link quality conditions:

Table 6. Calling capacity guidelines (per local gateway)

Connection type

Latency

Jitter

Packet loss

OTT

100 ms (max)

100 ms (max)

0.2%

Interconnect

30 ms

5 ms

Zero packet loss

Configure Local Gateway

1

Configure trunk from Control Hub.

2

Configure your device to perform the role of a Local Gateway.

3

Confirm that the Local Gateway is active in the Control Hub status.

For instructions on Partner Hosted gateway, see Configuring a Partner Hosted Gateway

Troubleshoot the Local Gateway

If the Local Gateway status isn’t active or there are other issues, refer to the following documents before you contact the support team:

When the Local Gateway isn't active, check the trunk status in the Control Hub:

  1. Log in to Control Hub using https://admin.webex.com, go to Services > Calling > Call Routing.

  2. Select the trunk that you want to check the status.

  3. Click Trunk Info.

The following are the different statuses of a certificate-based trunk:

  • Online—Successful connection between all the Webex Calling edge proxies and Local Gateway

  • Offline—Unsuccessful connection between the Webex Calling and Local Gateway

  • Impaired—Unsuccessful connection between at least one Webex Calling edge proxy and Local Gateway

  • Unknown—While establishing a connection between Webex Calling and the recently added Local Gateway

Support for Third-party Local Gateway

Support from both Cisco and the vendor partner are required for a Webex Calling deployment using a third-party SBC. The following outlines the support details:

  1. Webex Calling support:

    • Cisco or partners who use Webex Calling are required to have a support agreement with Cisco in order to get Cisco assistance (TAC support).

    • Cisco provides customer assistance for the Webex Calling up to edge deployment and the Webex Calling registered Cisco IP Phones.

  2. Vendor support:

    • During deployment, Cisco provides support for the customers or partners that have a validated third-party SBC device and is not responsible for providing assistance for the actual SBC.

    • Cisco isn’t responsible for non-Cisco support cases involving the customer and the SBC vendor. Issues or software defects that arise during deployment can be discussed with the SBC vendor and Cisco.