Set Silent Mode from the Settings Menu

You can stop the handset from ringing where there is an incoming call. This is called silent mode.

When the handset is in silent mode, incoming calls display on the screen, but the handset does not play a ringtone.

1	Press Menu .
2	Select Settings > Audio settings.
3	Highlight Silent.
4	Press Off to allow the handset to ring or press On to disable ringing.

Set the Ring Volume from the Settings Menu

You can change the volume of the ringer. This volume does not impact the volume level when you are on a call.

1	Press Menu .
2	Select Settings > Ring volume.
3	Press right or left on the ring of the navigation cluster .
4	Press Ok to save the level.

Set the Ringtone For Different Call Types

You can set different ring tones for these types of calls:

Normal call
Normal message
Urgent message
Emergency High, Medium, and Low
Alert

1	Press Menu .
2	Select Settings > Audio settings.
3	Select the ringtone you want to change. Ring melody Ring normal msg. Ring urgent msg. Ring emerg. high Ring emerg. med Ring emerg. low Alert tone
4	Press up or down on the ring of the navigation cluster to highlight a tone.
5	Press Play to hear the tone.
6	Press Select to save the tone.

Set the Alert Volume

You can change the volume of the tone that you hear when you press Emergency .

1	Press Menu .
2	Select Settings > Alert volume.
3	Press right or left on the ring of the navigation cluster .
4	Press Ok to save the level.

Set the Handset Vibration Mode

You can set the handset to vibrate when you have an incoming call.

1	Press Menu .
2	Select Settings > Vibrate.
3	Highlight your choice. Off (default): When an incoming call rings on the handset, the handset doesn't vibrate. Vibrate then ring: When an incoming call rings on the handset, the handset vibrates and then rings. Vibrate only: When an incoming call rings on the handset, the handset vibrates. You do not hear the ringtone. Vibrate and ring: When an incoming call rings on the handset, the handset vibrates and rings at the same time.
4	Press Select to save the setting.

Set the Tone When a Key is Pressed

You can set the sound you hear when you press a key.

1	Press Menu .
2	Select Settings > Key sound.
3	Highlight your choice. Silent (default): When you press a key, you don't hear anything. Click: When you press a key, you hear a click. Tone: When you press a key, you hear a tone.
4	Press Select to save the setting.

Set the Confirmation Sound

You can set the handset to play a tone when you change a setting on the handset.

1	Press Menu .
2	Select Settings > Audio Settings.
3	Highlight Confirmation sound.
4	Press Off to stop the tone or press On to make the handset play the tone.

Set the Coverage Warning

If you walk while on a call, it's easy to move out of range of the base station. When you walk out of range, the call drops abruptly.

You can set up your handset to give you a tone when the signal from the base station becomes too weak. When you hear the tone, you'll know to move closer to the base station.

If you aren't on a call and walk out of range, you see on the screen.

1	Press Menu .
2	Select Settings > Audio Settings.
3	Highlight Coverage warning.
4	Press Off to stop the tone or press On to make the handset play the tone.

Set the Charger Warning

You can set the handset to play a tone when you put the handset on the charger.

1	Press Menu .
2	Select Settings > Audio Settings.
3	Highlight Charger warning.
4	Press Off to stop the tone or press On to make the handset play the tone.