No Image on a Screen Connected to a Room System

Document created by Cisco Documentation Team on Jul 21, 2016
Version 1Show Document
  • View in full screen mode

If you can’t see an image from your video system or laptop on the screen, check the following:

  • Check that the cables are connected to the right ports on the monitor and video system or laptop.

  • Check that you have selected the correct input on your monitor.

  • Swap the suspected cable to another standard cable. Use one that is within the specifications for the cable type. If you are running cables at the limits of length specifications, try a cable that is well within the specifications and has no extenders, splitters, or converters attached. Then restart all equipment.

  • Check that the cable works with other equipment.

  • Confirm that another device connected to same input on the screen is displayed correctly.

  • If possible, connect the video system or laptop to another monitor to check whether the issue is with the monitor.