Build great workspaces with the Cisco collaboration devices partner ecosystem
Cisco collaboration devices partner ecosystem is built on our certification program to ensure that customers get the best experience out of their Cisco collaboration devices and make integration as seamless as possible when integrating with third-party technology.
![](https://www.cisco.com/content/dam/en/us/td/i/400001-500000/450001-460000/454001-455000/454985.jpg)
Verified third-party solutions meet our high standards for delivering high quality and ease of use. Here, you can check and find solutions that we have verified to work with Cisco collaboration devices.
The following tables list the supported products and their versions. Third party products have been tested on Cisco collaboration devices and with the version specified in the following tables. While other versions of the third party products may integrate equally well with Cisco devices, they have not been tested.
Devices
DisplaysCisco verified displays have been tested for compatibility and robustness of their video interfaces, optical characteristics, and basic security practices. When connected to a Cisco collaboration device they automatically reconfigure with the verified optimal configuration.
Testing of the display includes:
-
Image quality: The certification aims to ensure both the intrinsic image quality (white point, gamma, contrast, luminance) of a display as well as uniformity of the image and consistency between different displays.
-
Latency: Minimal time until an HDMI signal gets emitted as light to ensure as little lag as possible and synchronization with audio.
-
Standby reliability: To ensure power savings, the display must go to standby mode and wake up in due time when commanded by a Cisco device.
-
No user interaction: The certification ensures that no user interaction, for example input source selection, is required and that users are not prompted nor disturbed by pop up messages.
-
Self-configuration: Certified displays recognize Cisco devices and consequently auto configure with Cisco’s required settings.
-
Secure connection: Certified displays must be upgradable and must not attempt to stream content elsewhere than to a Cisco device.
Additional testing is required for touch or interactive displays, mentioned as “Touch” in the display type. Interactive displays coupled with a Cisco device will have to behave similarly to a Cisco Board and include compatibility with Microsoft touch experiences. The tests include compatibility with USB as well as the displays built-in gestures and functions.
Tests get improved over time based on technical developments and insight. It is the vendor’s responsibility to stay compatible with the requirements with subsequent firmware upgrades.
Vendor |
Product or series |
Type |
Firmware version |
Cisco test version |
Certificate |
Notes |
---|---|---|---|---|---|---|
Samsung |
QMB |
16:9 |
1040.7 |
0.7 |
QM65B and QM75B support Room Kit EQX |
|
Samsung |
QBB |
16:9 |
1040.7 |
0.7 |
QB65B and QB75B support Room Kit EQX |
|
Samsung |
QMC |
16:9 |
1040.4 |
1.0 |
QM65C and QM75C support Room Kit EQX |
|
Panasonic |
EQ2 |
16:9 |
2.40 |
0.8 |
||
LG |
UL3J |
16:9 |
03.08.41 |
0.7 |
65UL3J and 75UL3J support Room Kit EQX |
|
LG |
UH5J |
16:9 |
03.24.01 |
0.7 |
65UH5J supports Room Kit EQX |
|
LG |
UR640S |
16:9 |
03.17.00 |
1.0 |
||
LG |
UM5K |
16:9 |
3.70.30 |
1.0 |
||
Sony |
BZ30J, BU30J, BZ35J, BU35J, BZ40H, BU40H, BZ40J, BU40J |
16:9 |
6.5929 |
0.6 |
BZ30J 65-inch and 75-inch, BU30J 65-inch and 75-inch, BZ40H 65-inch and 75-inch, BU40H 65-inch and 75-inch support Room Kit EQX |
|
Sharp/NEC |
M751, M861, M981 |
16:9 |
1.200 |
1.0 |
||
Sharp/NEC |
MA431, MA491, MA551, P435, P495, P555 |
16:9 |
3.203 |
1.0 |
||
Sharp |
PN-LA652, PN-LA752, PN-LA862 |
16:9 with touch |
1.112 |
1.0 |
Ensure compatibility of cameras offered by third-party vendors with Cisco collaboration devices. Demonstrated video quality and control API interoperability.
Vendor |
Product or series |
Firmware tested |
Cisco test version |
Certificate |
Notes |
---|---|---|---|---|---|
Sony |
EVI-120H (Cisco PTZ-12) |
2.10 |
1.0 |
||
Sony |
SRG-120DH |
2.0 |
1.0 |
||
Sony |
BRC-X1000, BRC-H800 |
2.02 |
1.0 |
||
Sony |
BRC-X400, SRG-X400, SRG-X120 |
2.00 |
1.0 |
Ensure compatibility of audio experiences offered by third-party vendors with Cisco collaboration devices. Testing focuses on interoperability and mute synchronization, verifies audio quality and provides setup guidelines.
Vendor |
Product or series |
Firmware tested |
Cisco test version |
Certificate |
Notes |
---|---|---|---|---|---|
Shure |
Shure Microflex |
2.10 |
1.0 (USB) |
For more information, see the setup guides for Cisco collaboration devices and Shure Microflex . |
|
Yamaha |
Yamaha ADECIA |
1.7.0 |
1.0 (USB) |
For more information, see the setup guides for Cisco collaboration devices and Yamaha ADECIA . |
|
Sennheiser & QSC |
Sennheiser TeamConnect Ceiling 2 Q-SYS Core Nano |
1.8.4 (Sennheiser) 9.7.0 (QSYS) |
1.0 (USB) |
For more information, see the setup guides for Cisco collaboration devices and Sennheiser and Q-SYS . |
HDMI distribution amplifiers replicate a single HDMI video input to multiple HDMI video outputs. The Cisco collaboration device can control the devices connected to each HDMI video output using HDMI CEC. The verification tests cover HDMI interfaces including standby and wake-up robustness and device control.
You need to connect the distribution amplifier with a USB cable to the Cisco collaboration device.
|
Vendor |
Product or series |
Firmware tested |
Cisco test version |
Certificate |
Notes |
---|---|---|---|---|---|
Extron |
Extron DA HD 4K PLUS Series |
FW 1.02.0001, HW E34814 |
1.0 |
BYOD converters enable the older generation of Cisco devices such as the Room 55, Room 70, Codec Plus, Codec Pro, MX700 MX800, and SX80 to function in BYOD mode and send the camera HDMI and audio signals to a USB input.
More information on how to set it up in the USB mode article.
Vendor |
Product or series |
Firmware tested |
Cisco test version |
Certificate |
Notes |
---|---|---|---|---|---|
Inogeni |
4KX-PLUS |
1.0 |
Supports Cisco devices with dual displays |
Mounts, carts, stands, and furniture, specialized for Cisco collaboration devices. This provides the flexibility and mobility to maximize your collaborative experience within the office, classroom, or other interactive environments.
Vendor |
Product or series |
Version |
Cisco test version |
Certificate |
Notes |
---|---|---|---|---|---|
Urben Technologies Ltd |
CISCO-RB Series, CISCO-RBP Series, CISCO-QC Series |
1.0 |
Frames designed for Room Bar, Room Bar Pro, Room Kit Pro, and Room Kit EQ. Single, dual, and triple screens. 55, 65 and 75-inch displays. |
Workplace integrations
Power an inclusive and engaging workspace by connecting people, places, and spaces together. Easily find and reserve meeting rooms, communicate announcements, videos, company content to keep employee engaged.
Seamlessly weave together data, sensors, and artificial intelligence (AI), – to communicate, collaborate, and innovate in the flow of work.
Vendor |
Product or series |
Version |
Cisco test version |
Certificate |
Notes |
---|---|---|---|---|---|
Appspace |
Appspace Suite |
8.0 |
1.0 |
Maps, space reservation, employee app, data integration, signage. As a Solutions Plus Partner, Appspace can be found on the Cisco price list. |
|
UMA |
UMA suite |
1.2 |
1.0 |
Maps, space reservation, employee app, data integration. As a Solutions Plus Partner, UMA can be found on the Cisco price list. |
Easy join services
Easy join services create a consistent user experience for Cisco devices in Microsoft Teams, Zoom, and Google meetings. Available on legacy and new devices and an all networks (on-premises, hybrid, and cloud).
Vendor |
Product |
Version |
Cisco test version |
Certificate |
Notes |
---|---|---|---|---|---|
Synergy SKY |
Synergy SKY CONNECT Synergy SKY CONNECT for Government Synergy SKY Management Suite |
32.20.1921 32.20.1921 31.12.7081 |
1.0 |
As a Solutions Plus Partner, Synergy Sky can be found on the Cisco price list. |
Vendor contact information
Use of Webex Certification logos is strictly prohibited unless approved by Cisco Collaboration Devices Business Unit.
|