The password access isn’t designed for basic configuration; use Control Hub for configuring your DECT base stations.

All parameters configured in the Control Hub are validated and tested by the Webex Calling team. Hence, changing the parameters directly in the base station can cause a catastrophic outage for your multi cell network. Unless advised by the Cisco Technical Support, don’t change the configurations directly on the base station.

List of parameters to modify

This section lists the parameters that the administrators can modify and the parameters that must remain untouched.

This list indicates the pages on the DECT web interface that may be modified, or actions taken on them. The bold titles represent the pages accessible on the base station web interface.

DECT base Admin Web user interface

  • Change nothing means do not modify the parameters.

  • Change anything indicates that there’s no restriction to the items and can be modified or selected.

  • Any parameters modified through the web interface but present in the Webex Calling configuration is reverted to the Webex Calling values during the nightly resync or when the base station is rebooted.

  • Home/Status

    Do not select: Default Base Station button

  • Extensions

    Do not select: Delete Terminal

    Terminal page

    • Do not delete any extension

    • Do not alter shared call appearance settings

    • Do not edit any extension

  • Servers

    Change nothing

  • Network

    Change nothing

  • Management

    Change nothing, apart from the Syslog/SIP Log section

  • Firmware Update

    Change nothing unless explicitly advised by The Cisco Technical Support team to upgrade or downgrade,

  • Country

    Do not change the Time server

  • Security

    Change nothing

  • Central Directory

    Change nothing

  • Multi Cell

    Apart from the Base Station Group section, you must Change nothing. Unless advised specifically by the Cisco Technical Support team for testing.

  • LAN Sync

    Change nothing, unless advised specifically by the Cisco Technical Support team for testing.

  • Star Codes

    Change nothing

  • Call Progress Tones

    Change anything

  • Dial Plans

    Change nothing

  • Repeaters

    Change anything

  • Alarm

    Change anything

  • Statistics

    Change anything

  • Generic Statistics

    Change anything

  • Diagnostics

    Change anything

  • Configuration

    Don’t load any new configuration

  • Syslog

    Change anything

  • SIP Log

    Change anything