Get your phone ready by installing the components and get it connected to the network and power.

The phone register process varies with deployment ways. Your phone may get registered automatically when you connect it to the network. Otherwise, you must get the activation code from your administrator to register your phone.

Use the information in this section to connect your phone in a wired network.

Your phone supports Power over Ethernet (PoE). If your network supports PoE, an Ethernet connection powers up your phone and connects it to the network. You don't have to connect the shipped power adapter.

1

Connect the shipped handset to the handset port.

2

Insert the foot stand to the slots on the back of the phone.

For you to easily read the screen and eliminate glare on the screen, adjust the foot stand to change the phone to a proper angle.

3

Connect your phone to the network with the shipped Ethernet cable.

Your phone boots up automatically when it connects to the power source.
If your network supports PoE, your phone powers up when you connect it to the network. Otherwise, go to the next step to connect the power adapter.

4

Connect your phone to a power socket with the shipped power adapter.

Your phone boots up automatically when it connects to the power source.
If your network supports PoE, skip this step.

What to do next

Register your phone

Follow the steps in this section to connect your phone in a wireless network.

Phone ports vary by model. The 9851 diagrams used in the following steps show the ports to connect. Locate the right ports on your phone when you set up the phone.
1

Connect the shipped handset to the handset port.

2

Insert the foot stand to the slots on the back of the phone.

For you to easily read the screen and eliminate glare on the screen, adjust the foot stand to change the phone to a proper angle.

3

Connect your phone to a power socket with the shipped power adapter.

Your phone boots up automatically when it connects to the power source.
4

Press Start on the Welcome screen.

5

Choose your wireless network from the list, enter the username and password, and press Apply.

What to do next

Register your phone.