ATA adapters allow you to connect an analog device, such as an analog phone or fax machine, to your network. The connected device can then function like the IP phones in your network. An Interactive Voice Response (IVR) system is available to help you to configure and manage your ATA adapters. Use the phone keypad on the analog phone to select options and make your entries.

Action

IVR Code

Notes

Show IP address

110

Configure IP address

111

Available in static IP mode only

Show subnet mask

120

Configure subnet mask

121

Available in static IP mode only

Show default gateway

130

Configure default gateway

131

Available in static IP mode only

Show VLAN

230

Configure VLAN

231

To disable VLAN, set VLAN ID to 4095.

To enable VLAN, set VLAN ID from 1 to 4094.

Factory reset

73738

Reset service mode

73739

Erases all user data except network setting and log files.

Check internet addressing method

100

Answer with 0, the default option (DHCP).

Set internet addressing method

101

DCHP: 0

Static: 1


For more details on IVR, refer to Manage the ATA Using the IVR.