By connecting a display supporting touch inputs to your Room Bar, Room Bar Pro, Codec EQ, or Codec Pro, the device automatically gets the same UI as a Cisco Board and accepts touch inputs.
Using a Room Series device with a touchscreen lets you use the same functionality that a Cisco Board offers, such as whiteboarding and annotation. You can control the device from the touchscreen or a Room Navigator.
You can use the Room Bar without a Room Navigator. The other devices require a Room Navigator.
Supported Room Series devices-
Room Bar
-
Room Bar Pro
-
Codec EQ
-
Codec Pro
-
Dell C Series Large Format
-
Samsung QMR-T Digital Signage series
These displays have been tested for touch interoperability only and are not Cisco collaboration devices certified. |
When you connect the Room Series device to a touchscreen, you need to use both an HDMI cable and a USB cable.
On the Room Series device:
-
Connect the HDMI cable to connector 1.
-
Connect the USB cable to the USB-A port for the device to recognize the touch inputs.
-
Only one screen is supported in this setup.
-
Currently you must connect a Room Navigator to the device to go through first-time setup for the screen to be recognized as a touchscreen.
-
Touch redirect is not supported.