Thanks for your feedback.
Feedback?Onboard Zoom Rooms with the first-time wizard
Before you begin
- Confirm that the Cisco device and RoomOS release are supported for Zoom Rooms.
- You'll need a Webex activation code from Control Huband a Zoom Rooms activation code from Zoom administration portal.
- If the device is already set up, you need to factory reset the device to get access to the first-time wizard.
| 1 |
Start the new or factory reset Cisco device and follow the first-time wizard. |
| 2 |
On the Experience screen, select Zoom Rooms and continue. |
| 3 |
When prompted, register the device to Control Hub using the activation code from Control Hub. If you do not have a code, contact your Control Hub administrator. |
| 4 |
Set the device administrator passphrase and confirm it. |
| 5 |
On the diagnostics and usage screen, choose whether the device can send hardware issue reports, crash reports, and device usage data to Cisco, then continue. |
| 6 |
When the device reports that it is ready to install Zoom Rooms, select Begin installation. Keep the device connected to power while installation completes. |
| 7 |
When the Zoom Rooms sign-in screen appears, enter the Zoom Rooms activation code from your Zoom administrator. When the Zoom Rooms interface appears, sign in with a Zoom Rooms activation code from the Zoom admin portal or Zoom Device Management. |
