First steps

Try these solutions first if you experience problems with your Bang & Olufsen Cisco 980.

  • Make sure that your headset is fully charged. See Charge your Bang & Olufsen Cisco 980.

  • Make sure that your headset is on.

  • Check your phone or calling software settings to make sure that your headset is the selected audio device.

  • Disconnect other active Bluetooth® devices.

  • Increase the volume on your headset or call device.

  • Use the Webex app, Accessory Hub, or the Bang & Olufsen mobile app to see if there are any available software updates.

  • Move your headset closer to your desired call device and away from any potential sources of radio interference or obstructions.

  • Make sure that the Bluetooth drivers on your Windows or Mac device are up to date.

  • If the issue persists and none of the above solutions work, visit Cisco Headset Warranty Overview to find your headset’s warranty terms and open a TAC case for more assistance.

Update your headset in the Webex App

Firmware updates improve your audio experience or add new functionality to your headset. We recommend that you always install the latest software version to your headset when possible. Webex app alerts you whenever there is new software available.

For information on the latest firmware release, see Bang & Olufsen Cisco 980 release notes.

1

Connect your B&O Cisco 980 to your device with the USB cable.

2

Open Webex App.

3

Follow the on-screen prompts.

It takes about 5-10 minutes to update your headset firmware. Don't exit the app before the update completes.

Update your headset in Accessory Hub

Firmware updates improve your audio experience or add new functionality to your headset. We recommend that you always install the latest software version to your headset when possible. Accessory Hub alerts you whenever there is new software available.

For information on the latest firmware release, see Bang & Olufsen Cisco 980 release notes.

1

Connect your Bang & Olufsen Cisco 980 to your device using a USB cable.

2

Open the Accessory Hub Desktop app or web app.

3

Follow the on-screen prompts.

It takes about 5 to 10 minutes to update your headset firmware. Don't exit the app before the update completes.

Update your headset in the Bang & Olufsen mobile app

Firmware updates improve your audio experience or add new functionality to your headset. We recommend that you always install the latest software version to your headset when possible. The Bang & Olufsen mobile app alerts you whenever there is new software available.

For information on the latest firmware release, see Bang & Olufsen Cisco 980 release notes.

1

Choose your headset in the Bang & Olufsen app.

2

Tap Settings in the top-right corner of the screen.

3

Choose Product Settings > Software > Update software.

It usually takes 5 to 10 minutes for your headset to update. The screen displays the estimated remaining time on your update.

Factory reset your headset

A factory reset clears all saved Bluetooth® connections and resets all headset settings to their default factory values. If you are using a USB adapter with your headset, a factory reset also erases the connection to the USB Adapter. See Pair the Cisco Headset USB Adapter to your headset to learn how to pair your headset to the adapter.

Before you begin

Remove your headset from the Bang & Olufsen mobile app and from any connected Bluetooth devices.

Press and hold the Power button on the bottom of the right ear cup for eight seconds.

The LED above the button flashes red when the reset is complete.

Completely close and reopen the Bang & Olufsen app before you try to pair your headset after a factory reset.

Clean your headset

1

To clean your Bang & Olufsen Cisco 980, you should use a soft, damp cloth. As the high grain leather used in the product is a natural material, it is therefore subject to change over time and with daily use. Irregularities in the consistency and depth of the color should not be considered a fault but inherent to the natural characteristics of the leather. Changes in the color of the leather and signs of wear are normal. While short, light and occasional exposure to water with a damp cloth is not a problem, leather is not waterproof.

2

(Optional) If a headset requires additional cleaning, apply a small amount of non-alcohol-based cleaning agent onto a soft, clean, lint-free cloth, and gently wipe down the headset. Avoid using a 70% isopropyl alcohol solution, as it may discolor or cloud the surface and potentially degrade the integrity of the device over time.

If the headset requires disinfection, you may use a 70% isopropyl alcohol solution at your own risk.

Don't allow moisture to get inside your ear cups, the USB-C port, or the 3.5 mm jack. Damage to your Cisco products as a result of cleaning and disinfecting isn't covered under our warranties or product guarantees.

Replacement ear pads are available to order on the headsets. You can find the ordering information in the Data Sheets.