Introduction

Use this article as a guide to resolve issues that might occur when you are using the Cisco Webex Connected UC Telemetry and Analytics service.

Address Technical Issues

On-boarding User Interface Issues

Issue

Resolution

Under Services in the Cisco Webex Control Hub, unable to view the UC Management tile.

  • Ensure that you’ve the right roles (that is, UC Admin) and entitlements.

Save Button on the Create Agent Install File window is disabled.

Ensure that you've entered data in all the mandatory fields on this window.

Unable to create Cluster Group.

Contact Cisco TAC support.

Success message is not generated when an Agent Install file is created.

Check your internet connection and confirm if that's working.

Token in the HTTP Proxies field of the Create Agent Install File window appears in red.

Ensure that you've entered a valid proxy URL.

Download button is disabled on the UC Management window or the My First Agent screen.

The Agent Install file may take up to 2 minutes to be created. After the agent cop file is created, refresh the page so that the Download button is enabled. If the Download button remains disabled after 5 minutes, contact Cisco TAC support.

Cluster Group Status shows Misconfigured.

Contact Cisco TAC support.

Cluster Group Status shows No Agent running.

Download and install the Agent Install file.

Cluster Group Status shows No Publisher.

Contact Cisco TAC support.

Cluster Group Status or Node Status shows Offline.

For more information about node or cluster group statuses, see the Add Cluster Groups section in Set Up Cisco Webex Cloud-Connected UC for On-Premises Devices.

  • Check which node is offline.

  • For the given node. If the proxy information has changed, you can use the CLI command “utils ucmgmt proxy” to change the proxy information.

  • If still doesn’t work, collect the log files using file command.

    The Agent service logs are located at: /var/log/active/ucmgmt

    The log filenames are cloud_agent_startup.log and cloud_agent.log.

    Contact Cisco TAC support.

Node status in Telemetry Inventory shows Installation Failed.

This indicates telemetry module installation or upgrade has failed. Contact Cisco TAC support.

Node status in Analytics Inventory shows Offline.

If you've configured an extra proxy, it would take approximately 1.5 hours for the telemetry module to select up the working proxy and change the node status to online. If the node continues to remain offline after 1.5 hours, contact Cisco TAC support.

Network error appears on the screen.

  • Check if you're using a supported browser version.

  • Disable any browser privacy plugins such as, EFF’s Privacy Badger and try again.

Node status shows Misconfigured.

This indicates that the node has been incorrectly configured. Contact Cisco TAC support.

Analytics User Interface Issues

When you click the Analytics tab in the Cisco Webex Control Hub, you can view the Analytics UI.

Issue

Resolution

Connected UC tab doesn't appear after Control Hub sign-in.

The role, scope, or entitlement that's assigned to you could be incorrect or insufficient. Contact Cisco TAC support.

When you click on the Connected UC tab, 403 Forbidden message is displayed.

  1. Check if you're using a supported browser.

  2. Try accessing the Analytics UI in Incognito mode with all plug-ins disabled.

  3. Clear your browser cache and cookies.

  4. If the issue persists, contact Cisco TAC support.

Analytics page is not loading for incognito mode in Chrome.

Go to Settings > Privacy and security > Cookies and other site data. and select Allow all cookies. For other browsers, enable cookies using the relevant menu options.

Charts are not loading on the Analytics UI.

  1. Check if you’ve the latest version of the browser (Chrome, Firefox, or Edge).

  2. If you've the latest browser version, then refer to the relevant Troubleshooting Guide based on your version of the Cisco Unified Communication Manager at:

    https://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-troubleshooting-guides-list.html

  3. If the issue persists, contact Cisco TAC support.

In the Analytics UI, some of the charts don't have any data.

  • Check that CDR Enabled Flag field is set True and the Call Diagnostics Enabled field is set to Enabled Only When CDR Enabled Flag is True.

  • If you've configured an extra proxy, it would take approximately 1.5 hours for the telemetry module to select up the working proxy and change the node status to online. If the node continues to remain offline after 1.5 hours, contact Cisco TAC support.

Charts on the Analytics UI do not display data.

Check if the telemetry service is stopped.

Charts on the Analytics UI display incorrect data.

Contact Cisco TAC support.

Call Failure Analysis chart in the Service Experience category doesn't show any failure data.

Check if CDR Log Calls with Zero Duration Flag in the Unified CM service parameters has been enabled for all Unified CM nodes. If it isn't enabled for all nodes, ensure that you enable it.