Devices that support this feature

  • Board Pro and Board Pro G2

  • Codec Plus (including Room Kit Plus), Room 55 Dual, and Room 70

  • Codec Pro (including Room Kit Pro), Room 70 G2, Room 70 Panorama, and Room Panorama

  • Codec EQ (including Room Kit EQ) and Room Kit EQX

  • Room 55

Requirements and limitations

  • Supported version: HDCP - High-bandwidth Digital Content Protection, version 1.4.

  • You can't share HDCP-protected content while in a call.

  • The screens to display protected content on must support HDCP. The integrated screens of the room devices support HDCP.

Configuration

You can configure HDCP support from device configurations, the local web interface of the device, and using the API. Read the Device configurations article for more information on how to access the configurations.

For the device to support HDCP-protected content, you must set up both the input and output correctly.

  1. Set the Video > Input > Connector [n] > HDCP > Mode configuration to On to allow HDCP-protected content from a source on this connector.

    You can configure only one HDMI input connector to support HDCP-protected content. Read more details below.

  2. Check that the Video > Output > Connector [n] > HDCPPolicy configuration isn't switched off. It must be On to allow transmitting HDCP protected content on the connected screen.

    You can configure some HDMI outputs to support HDCP-protected content. Read more details below.

Details about inputs that support HDCP content

The type of device determines which input you can configure to support HDCP-protected content.

  • Board Pro and Board Pro G2: Input Connector 3 (HDMI)

  • Codec Plus, Room 55 Dual, Room 70: Input Connector 2 (HDMI 2)

  • Codec Pro, Room 70 G2, Room 70 Panorama, Room Panorama: Input Connector 5 (HDMI 5)

  • Codec EQ, Room Kit EQX: Input Connector 3 (HDMI 3)

  • Room 55: Input Connector 3 (HDMI 2)

When the input is configured to support HDCP, these restrictions apply:

  • You can't share any content from this input while in a call. However, you can share both HDCP-protected content and non-protected content locally.

  • You can’t take web snapshots of this source.

Details about outputs that support HDCP content

The type of device determines which outputs you can configure to transmit HDCP-protected content.

  • Codec Plus, Room 55 Dual, Room 70: Output Connector 1 (HDMI 1)

    This is the integrated screen of Room 70 Single, and the left integrated screen of Room 55 Dual and Room 70 Dual.

  • Codec Pro, Room 70 G2, Room 70 Panorama, Room Panorama: Output Connector 1 and 2 (HDMI 1 and 2)

    These are the main screens of Room Panorama and the integrated screens of Room 70 G2 Dual and Room 70 Panorama. Output Connector 1 is the integrated screen of Room 70 G2 Single.

  • Codec EQ, Room Kit EQX: Output Connector 1, 2, and 3 (HDMI 1, 2, and 3)

  • Room 55, Board Pro, Board Pro G2: The integrated screen