Before you begin
When you register your room or desk device or Webex Board to Cisco Webex, you can administer it from Control Hub. To learn more about Control Hub, see Get started with Cisco Webex Control Hub .
If you want to add Cisco Webex Calling and other services, see Add Services to an Existing Workspace with Cisco Webex Boards, Room and Desk Devices . Note that you can't add Cisco Webex Calling to the Room USB.
The device is shipped with preinstalled software and updates are installed automatically. If there’s a software update available when you first register a new device, we recommend that you upgrade it. To find out more about software updates, see Automatic software updates .
Install and plug in the needed cables according to the installation guide instructions. When the device is plugged in, it automatically starts up and checks the network connection. If the network connection works, the device checks for updates of Webex RoomOS and installs any new versions it finds. If there is an issue with the connection, you see an error message that suggests a possible cause.
After the software update, the setup wizard starts. Follow the on-screen instructions to set up your network preferences, enter the activation code, and check the screen, camera, and sound.
You can change the language settings before starting the setup wizard, or afterward from the Settings menu.
The time format follows your network's time zone setting and can't be configured separately.