Dec 5, 2019 | 689 view(s) | 5 people thought this was helpful
Connect and Use the Cisco Headset 530 Series Y Trainer Cable
You can connect a second headset to the Cisco Headset 530 Series with the Y Trainer Cable. The Y Trainer Cable enables a trainer to listen in to a trainee's call and join if necessary. The switch on the trainer cable alternates voice control between the headsets so that a trainer or supervisor can quickly join a call if necessary. The color on each arm of the cable corresponds to the colors on the switch. When the switch shows blue, the blue-banded arm of the headset is active. When the switch shows light grey, the light grey arm of the cable is active.
1
Connect the trainer cable to the Cisco Headset 530 Series USB controller.
2
Connect the trainee headset to the arm of the trainer cable without the control switch.
3
Connect the trainer headset to the arm of the Y cable with the switch.
4
Use the switch on the trainer cable to alternate voice feedback between the headsets.