Your self-view shows what others see from your Desk or Room Series device in a call. You can use it to confirm that they see what you want them to see.

From time to time, you may want to have your self-view activated during the meeting. This way you can ensure that you remain seen on the screen.

It may happen that the current position of the self-view blocks important parts of the image on your screen. You may therefore want to move it to another place on your screen. This can be done from your touch screen or with a remote control depending on your Desk or Room device.

1

Tap the Selfview icon. You can now see your self-view on the screen.

2

On some Desk devices, you can change the location of your self-view on your screen. Press the self-view icon and drag and drop it to change the location. You can select between six predefined locations.

3

To close the self-view, tap the Selfview icon again.

1

Tap the Camera icon and select Selfview. You can now see your self-view on the screen.



2

Use the camera settings to pan, tilt, and zoom the camera position to get the camera view you want.

Tap the Maximize and Minimize icon to toggle between the PiP image and full-screen image.

3

When you're in a call you can change the location of your self-view on your screen.


In the call menu on the Touch 10, press the self-view icon and drag and drop it to change the location. You can select between six predefined locations.

4

To close the self-view, tap the Camera icon and deselect Selfview.

1

Navigate to the camera icon in the upper right corner on the home screen and select it with the remote control’s OK button.


2

Select Pin Selfview icon to turn self-view on. Select the Minimize/Maximize icon to toggle between PiP and full screen self-view.


Select the camera icon in the Camera Control menu to get access to the zoom control and the pan and tilt wheel. Use these to adjust the camera position.



3

To close the self-view, go to the Camera control menu and deselect Pin Selfview.

To check your self-view at any time, swipe from the right side of the screen. As long as your camera is open/on, you'll see your self-view in the right side panel. You can tap Camera Settings and then Open Fullscreen to see your self view in full. To exit the full screen, swipe from the right again, tap Camera Settings, and then tap Close Fullscreen.

To close the right side panel, tap anywhere else on the screen.

To open and change the location of your self-view on the screen during a call:

  1. Tap the screen to get the control buttons across the bottom. Tap Selfview. Your self view will open up on top of the call.

  2. Toggle Always show ON. Press the self-view and drag and drop it to change the location. It will snap to pre-defined locations as you drag.

  3. To hide the self view again, tap the Selfview button and toggle Always show OFF. It will still appear in the right side panel whenever you swipe from the right.