For all Cisco’s products we recommend using a soft, lint-free cloth and avoid any abrasive or coarse materials. Unplugging the device before cleaning is also recommended.

Cleaning touch glass surfaces

For general cleaning, wipe the surface of Board, Desk, and Touch controllers with a soft dry cloth or use any normal alcohol-based screen wipe. For disinfection purposes, apply a solution of 70% isopropyl alcohol onto a clean, soft cloth and wipe gently. Do not spray directly onto the device. Do not use abrasive cleaners, aerosol sprays, or bleach. We don’t recommend other solutions for our glass surfaces as they can dissolve the protective coating on the screen.

Cleaning non-touch monitors

For general cleaning, wipe the surface of the MX and Room Series products using a small amount of non-alcohol-based cleaning agents onto a soft, clean, lint-free cloth and gently wipe the surface.

Do not use acetone, toluene or alcohol because they will cause chemical damage to the polarizer of the screen.

Cleaning plastic and metal components and enclosures

Start by applying a small amount of non-alcohol-based cleaning agents onto a soft, clean, lint-free cloth, and gently wipe the surface. Avoid using a 70% isopropyl alcohol on the plastic and metal parts of the devices as it may discolor or cloud the parts and potentially degrade the parts' integrity over time.

If disinfecting the plastic and metal is required, a 70% isopropyl alcohol can be used at your own risk.

Cleaning textiles and fabrics

For the textile fronts of our products, we recommend using only a soft dry cloth. We recommend removing the fabric cover completely (when possible) if disinfecting the fabric is required. It is not possible to remove the fabric from the current Room Kit or Room Kit Mini video devices.


Damage to your Cisco products as a result of cleaning and disinfecting isn’t covered under our warranties or product guarantees.

We are actively working with the market leaders in the Global Infection Prevention industry on the best ways to clean and disinfect our products for the safety and health of our customers and their employees and will continue to update this guideline regularly.