By selecting an automatic camera mode you'll get the best view for your device and meeting, without having to manually control the cameras yourself during meetings. You can change camera modes whether you're in a call or not.

Depending on the device you're using, there are a few different modes to choose from:

  • Group. The camera will adjust to show everyone.

  • Frames. The camera will zoom and show people individually or in smaller groups.

  • Speaker. The camera will follow the person speaking. The maximum distance for speaker tracking to work is 7.5 meters.

  • Best view. The camera will adjust automatically so you are always in the center of the frame.

  • Manual. Adjust the camera yourself.

  • Custom preset modes may also be available, if any have been defined. Read this article about camera presets.


Which modes are available to you can also depend on configurations your administrator has set.

To select a camera mode:

1

Swipe right or tap the button on the home screen. Tap Camera.

2

Tap Camera mode and then Auto.

3

Choose a mode.



Or, tap Manual and adjust the camera yourself:



For more about manual camera control with a touch controller, and how to save camera presets, read this article.

4

Tap anywhere outside the control panel to exit.


 

You can also access and adjust the camera controls in or out of call by tapping the camera button on your selfview.


This does not apply to DX70 and DX80.

To select a camera mode:

1

Swipe right or tap the button on the home screen. Tap Camera.

2

Tap Camera mode and then Auto. Select Best view.



On Desk Hub, tap Camera control and then select Best view.

3

Or, tap Manual and adjust the camera yourself:



4

Tap anywhere outside the control panel to exit.


 

You can also access and adjust the camera controls in or out of call by tapping the camera button on your selfview.

To select a camera mode:

1

Tap the button on the touch controller's home screen. Tap Camera.


 

When you open the camera settings on a touch controller, you also get the Selfview settings. See this article about adjusting your selfview.

2

Tap Camera control. Choose a mode.




 

Speaker mode is not available on Room Kit Mini or Webex Room USB.

3

Or, select Manual and adjust the camera yourself:



For more about manual camera control with a touch controller, and how to save camera presets, read this article.

4

Tap the X in the upper right corner to exit.

MX700, MX800, and SX80 support speaker tracking with the SpeakerTrack 60 camera. The maximum distance for speaker tracking to work is 7.5 meters.

To turn speaker tracking on and off:

1

On the touch controller, select Camera in the upper right corner.

2

Toggle Speaker Tracking on or off.

3

Tap anywhere outside the menu to exit.