Learn how to turn your DECT handset on and off and how to lock and unlock the keypad.
Your new handset
Before you can use your handset, you need to perform these tasks:
-
Install the battery in the handset, charge the handset, and configure the handset to connect to a base station. See Install Your New Handset.
-
Sign in to https://settings.webex.com/ and complete your initial setup.
Turn on your handset
Press and hold Power/End until the screen turns on. |
Turn off your handset
Press and hold Power/End until the screen turns off. |
Lock the handset keypad
You can manually lock the keypad to stop accidental dialing.
You can manually lock the keypad to stop accidental dialing. When you lock the keypad, the softkey label doesn't display.
When the keypad is locked, you can only dial emergency numbers. |
Press and hold Zero (0) until the message "Press and hold 0" and the key lock icon ( or ) are displayed on the screen. |
Unlock the handset keypad
When the keypad is locked, you can only dial emergency numbers.
|
You must unlock the keypad before you can place most calls. You may need to input a PIN to unlock the handset. The softkey labels appear when you unlock the keypad.
Press and hold Zero (0) until the message "Press and hold *" and the key lock icon or doesn't display on the screen. |