Use the included USB-C cable to charge your B&O Cisco 980. It takes about 2.5 hours to fully charge the headset. As your headset charges, the right LED slowly pulses to show the battery status. When your headset is fully charged, the power LED changes from pulsing green to solid green.

USB-C cable connecting to the USB-C port on the right ear cup

Table 1. Headset Charge Status

Power LED

Charge Status
Power LED shows solid green

Full Charge
Power LED blinks green

High charge
Power LED blinks yellow

Medium charge
Power LED blinks red

Low charge

1

Insert the USB-C cable into the USB-C charging port at the bottom of the right ear cup.

2

Plug the USB-A end of the cable into any powered USB port.