- Accueil
- /
- Article
Cet article est destiné aux administrateurs réseau, en particulier les administrateurs de pare-feu et de sécurité proxy qui utilisent les services Webex Calling au sein de leur organisation. Il décrit les exigences réseau et répertorie les adresses, les ports et les protocoles utilisés pour connecter vos téléphones, l’application Webex et les passerelles aux services Webex Calling.
A correctly configured firewall and proxy are essential for a successful Calling deployment. Webex Calling uses SIP and HTTPS for call signaling and the associated addresses and ports for media, network connection, and gateway connectivity as Webex Calling is a global service.
Not all firewall configurations require ports to be open. However, if you're running inside-to-outside rules, you must open ports for the required protocols to let out services.
Network Address Translation (NAT)
Network Address Translation (NAT) and Port Address Translation (PAT) functionality are applied at the border between two networks to translate address spaces or to prevent the collision of IP address spaces.
Organizations use gateway technologies like firewalls and proxies that provide NAT or PAT services to provide internet access to Webex App applications or Webex devices that are on a private IP address space. These gateways make traffic from internal Apps or Devices to the internet appear to be coming from one or more publicly routable IP addresses.
-
If deploying NAT, it’s not mandatory to open an inbound port on the firewall.
-
Validate the NAT pool size required for App or Devices connectivity when multiple app users and devices access Webex Calling & Webex aware services using NAT or PAT. Ensure that adequate public IP addresses are assigned to the NAT pools to prevent port exhaustion. Port exhaustion contributes to internal users and devices being unable to connect to the Webex Calling and Webex Aware services.
-
Define reasonable binding periods and avoid manipulating SIP on the NAT device.
-
Configure a minimum NAT timeout to ensure proper operation of devices. Exemple: Cisco phones send a follow-up REGISTER refresh message every 1-2 minutes.
-
If your network implements NAT or SPI, then set a larger timeout (of at least 30 minutes) for the connections. This timeout allows reliable connectivity while reducing the battery consumption of the users' mobile devices.
SIP Application Layer Gateway
If a router or firewall is SIP Aware, that is the SIP Application Layer Gateway (ALG) or similar is enabled, we recommend that you turn off this functionality to maintain correct operation of service.
Check the relevant manufacturer's documentation for steps to disable SIP ALG on specific devices.
Proxy support for Webex Calling
Organizations deploy an internet firewall or internet proxy and firewall, to inspect, restrict, and control the HTTP traffic that leaves and enters their network. Thus protecting their network from various forms of cyberattacks.
Proxies perform several security functions such as:
-
Allow or block access to specific URLs.
-
Authentification de l’utilisateur
-
IP address/domain/hostname/URI reputation lookup
-
Traffic decryption and inspection
On configuring the proxy feature, it applies to all the applications that use the HTTP's protocol.
The Webex App and Webex device applications include the following:
-
Services Webex
-
Customer device activation (CDA) procedures using Cisco Cloud provisioning platform such as GDS, EDOS device activation, provisioning & onboarding to Webex cloud.
-
Certificate Authentication
-
Firmware Upgrades
-
Status Reports
-
PRT Uploads
-
XSI Services
If a proxy server address is configured, then only the Signaling traffic (HTTP/HTTPS) is sent to the proxy server. Clients that use SIP to register to the Webex Calling service and the associated media aren’t sent to the proxy. Therefore, allow these clients to go through the firewall directly. |
Supported Proxy Options, configuration & Authentication types
The supported proxy types are:
-
Explicit Proxy (inspecting or noninspecting)—Configure the clients either App or Device with explicit proxy to specify the server to use.
-
Transparent Proxy (noninspecting)—The Clients aren’t configured to use a specific proxy server address and don’t require any changes to work with a noninspecting proxy.
-
Transparent Proxy (inspecting)—The Clients aren’t configured to use a specific proxy server address. No HTTP's configuration changes are necessary; however, your clients either App or Devices need a root certificate so that they trust the proxy. The IT team uses the inspecting proxies to enforce policies on the websites to visit and the types of content that aren’t permitted.
Configure the proxy addresses manually for the Cisco devices and the Webex App using:
-
Platform OS
-
Device UI
-
Automatically discovered using Web Proxy mechanisms such as:
-
Web Proxy Auto Discovery (WPAD) - Web Proxy Auto Discovery Protocol
-
Proxy Auto Config (PAC) files - Proxy Auto-Config Files
-
While configuring your preferred product types, choose from the following Proxy configurations & authentication types in the table:
Produit |
Configuration du proxy |
Type d’authentification |
---|---|---|
Webex pour Mac |
Manuelle, WPAD, PAC |
No Auth, Basic, NTLM,† |
Webex pour Windows |
Manuelle, WPAD, PAC, GPO |
No Auth, Basic, NTLM, †, Negotiate † |
Webex pour iOS |
Manuelle, WPAD, PAC |
Aucune authentification, basique, Digest, NTLM |
Webex pour Android |
Manuelle, PAC |
Aucune authentification, basique, Digest, NTLM |
Application Web Webex |
Supported through OS |
No Auth, Basic, Digest, NTLM, Negotiate † |
Périphériques Webex |
WPAD, PAC, ou manuelle |
Aucune authentification, basique, Digest |
Téléphones IP Cisco |
Manuelle, WPAD, PAC |
Aucune authentification, basique, Digest |
Nœud de maillage vidéo WebEx |
Manuelle |
Aucune authentification, basique, Digest, NTLM |
For legends in the table:
-
†Mac NTLM Auth - Machine need not be logged on to the domain, user prompted for a password
-
†Windows NTLM Auth - Supported only if a machine is logged onto the domain
-
Negotiate †- Kerberos with NTLM fallback auth.
-
To connect a Cisco Webex Board, Desk, or Room Series device to a proxy server, see Connect your Board, Desk, or Room Series device to a proxy server.
-
For Cisco IP phones, see Set Up a Proxy Server as an example for configuring the proxy server and settings.
For |
Proxy settings for Windows OS
Microsoft Windows support two network libraries for HTTP traffic (WinINet and WinHTTP) that allow Proxy configuration.WinINet is a superset of WinHTTP.
-
WinInet is designed for single-user, desktop client applications
-
WinHTTP is designed primarily for multiuser, server-based applications
When selecting between the two, choose WinINet for your proxy configuration settings. For details, see wininet-vs-winhttp.
Refer to Configure a list of allowed domains to access Webex while on your corporate network for details on the following:
-
To ensure that people only sign in to applications using accounts from a predefined list of domains.
-
Utilisez un Serveur Proxy pour intercepter les demandes et limiter les domaines autorisés.
Inspection du proxy et épinglage du certificat
The Webex App and Devices validate the certificates of the servers when they establish the TLS sessions. Certificate checks that such as the certificate issuer and digital signature rely on verifying the chain of certificates up to the root certificate. To perform the validation checks, the Webex App and Devices use a set of trusted root CA certificates installed in the operating system trust store.
If you have deployed a TLS-inspecting Proxy to intercept, decrypt and inspect Webex Calling traffic. Ensure that the certificate the Proxy presents (instead of the Webex service certificate) is signed by a certificate authority, and the root certificate is installed in the trust store of your Webex App or Webex device.
-
For Webex App - Install the CA certificate that is used to sign the certificate by the proxy in the operating system of the device.
-
For Webex Room devices and Cisco multiplatform IP Phones - Open a service request with the TAC team to install the CA certificate.
This table shows the Webex App and Webex Devices that support TLS inspection by Proxy servers
Produit |
Prend en charge les autorités de certification de confiance personnalisées pour l’inspection TLS |
---|---|
Application Webex (Windows, Mac, iOS, Android, Web) |
Oui |
Périphériques Webex Room |
Oui |
Cisco IP Multiplatform (MPP) Phones |
Oui |
Firewall configuration
Cisco supports Webex Calling and Webex Aware services in secure Cisco and Amazon Web Services (AWS) data centers. Amazon has reserved its IP subnets for Cisco’s sole use, and secured the services located in these subnets within the AWS virtual private cloud.
Configure your firewall to allow communication from your devices, App's applications, and internet-facing services to perform their functions properly. This configuration allows access to all the supported Webex Calling and Webex Aware cloud services, domain names, IP addresses, Ports, and protocols.
Whitelist or open access to the following so that the Webex Calling and Webex Aware services function correctly.
-
The URLs/Domains mentioned under the section Domains and URLs for Webex Calling Services
-
IP subnets, Ports, and Protocols mentioned under the section IP Subnets for Webex Calling Services
-
If you're using the Webex Suite of cloud collaboration services within their organization, Webex Meetings, Messaging, Webex attendant console and other services then ensure you have the IP subnets, Domains/URLs mentioned in these articles are open Network Requirements for Webex Services and Network requirements for Attendant console
If you’re using only a firewall, then filtering Webex Calling traffic using IP addresses alone isn’t supported as some of the IP address pools are dynamic and may change at any time. Update your rules regularly, failing to update your firewall rules list could impact your users' experience. Cisco doesn’t endorse filtering a subset of IP addresses based on a particular geographic region or cloud service provider. Filtering by region can cause severe degradation to your calling experience.
Remarque : Cisco doesn't maintain dynamically changing IP address pools hence it isn’t listed in this article. |
If your firewall doesn’t support Domain/URL filtering, then use an Enterprise Proxy server option. This option filters/allows by URL/domain the HTTPs signaling traffic to Webex Calling and Webex Aware services in your Proxy server, before forwarding to your firewall.
You can configure traffic using port and IP subnet filtering for call media. Since the media traffic requires direct access to the internet, choose the URL filtering option for signaling traffic.
For Webex Calling, UDP is Cisco’s preferred transport protocol for media, and it recommends using only SRTP over UDP. TCP and TLS as transport protocols for media aren’t supported for Webex Calling in production environments. The connection-orientated nature of these protocols affects media quality over lossy networks. If you have queries regarding the transport protocol, raise a support ticket.
Domains and URLs for Webex Calling services
A * shown at the beginning of a URL (for example, *.webex.com) indicates that services in the top-level domain and all subdomains are accessible.
Domaine/URL |
Description |
Applications et périphériques Webex utilisant ces domaines/URLs | ||
---|---|---|---|---|
Services Webex Cisco | ||||
*.broadcloudpbx.com |
Microservices d’autorisation Webex pour le lancement croisé de Control Hub vers le portail d’administration d’appel. |
Control Hub | ||
*.broadcloud.com.au |
Services d’appel Webex en Australie. |
Tous | ||
*.broadcloud.eu |
Services d’appels Webex en Europe. |
Tous | ||
*.broadcloudpbx.net |
Services de configuration et de gestion des clients appelants. |
Applications Webex | ||
*.webex.com *.cisco.com |
Core Webex Calling & Webex Aware services
When a phone connects to a network for the first time or after a factory reset with no DHCP options set, it contacts a device activation server for zero touch provisioning. New phones use activate.cisco.com and phones with firmware release earlier than 11.2(1), continue to use webapps.cisco.com for provisioning. Download the device firmware and locale updates from binaries.webex.com. Allow Cisco Multiplatform phones (MPPs) older than 12.0.3 version to access sudirenewal.cisco.com through port 80 to renew Manufacturer Installed Certificate (MIC) and have a Secure Unique Device Identifier (SUDI). For details, see Field notice. |
Tout | ||
*.ucmgmt.cisco.com |
Services d’appel Webex |
Control Hub | ||
*.wbx2.com et *.ciscospark.com |
Used for cloud awareness to reach out to Webex Calling & Webex Aware services during and after onboarding. These services are necessary for
|
Tout | ||
*.webexapis.com |
Webex microservices that manage your Webex App applications and Webex devices.
|
Tout | ||
*.webexcontent.com |
Webex Messaging services related to general file storage including:
|
Webex Apps Messaging services.
| ||
*.accompany.com |
People insights integration |
Applications Webex | ||
Additional Webex-Related Services (Third-Party Domains) | ||||
*.appdynamics.com *.eum-appdynamics.com |
Suivi des performances, capture des erreurs et des pannes, mesures des sessions. |
Control Hub | ||
*.sipflash.com |
Device management services. Firmware upgrades and secure onboarding purposes. |
Applications Webex | ||
*.walkme.com *.walkmeusercontent.com |
Client de guidage des utilisateurs de Webex. Fournit des visites guidées pour l’intégration et l’utilisation pour les nouveaux utilisateurs. Pour plus d'informations concernant Walkme, cliquez ici. |
Applications Webex | ||
*.google.com *.googleapis.com |
Notifications to Webex apps on mobile devices (Example: new message, when call is answered) For IP Subnets, refer to these links Google Firebase Cloud Messaging (FCM) service Apple Push Notification Service (APNS)
| Application Webex |
IP Subnets for Webex Calling services
IP Subnets for Webex Calling Services*† | ||
---|---|---|
23.89.0.0/16 |
85.119.56.0/23 |
128.177.14.0/24 |
128.177.36.0/24 |
135.84.168.0/21 |
139.177.64.0/21 |
139.177.72.0/23 |
144.196.0.0/16 |
150.253.128.0/17 |
163.129.0.0/17 |
170.72.0.0/16 |
170.133.128.0/18 |
185.115.196.0/22 |
199.19.196.0/23 |
199.19.199.0/24 |
199.59.64.0/21 |
Objet de la connexion | Adresses sources | Ports source | HTTPS et WSS pour la signalisation et la messagerie. | Adresses de destination | Ports de destination | Notes | |||
---|---|---|---|---|---|---|---|---|---|
Signalisation des appels à Webex Calling (SIP TLS) | Passerelle locale externe (NIC) | 8000-65535 | TCP | Reportez-vous à Sous-réseaux IP pour les services d’appel Webex. | 5062, 8934 |
These IPs/ports are needed for outbound SIP-TLS call signaling from Local Gateways, Devices, and Webex App Applications (Source) to Webex Calling Cloud (Destination). Port 5062 (required for Certificate-based trunk). And port 8934 (required for Registration-based trunk | |||
Périphériques | 5060-5080 | 8934 | |||||||
Application Webex | Ephémère (dépend du système d’exploitation) | ||||||||
Call signaling from Webex Calling (SIP TLS) to Local Gateway |
Webex Calling address range. Refer to IP Subnets for Webex Calling Services | 8934 | TCP | IP or IP range chosen by customer for their Local Gateway | Port or port range chosen by customer for their Local Gateway |
Applies to certificate-based local gateways. It is required to establish a connection from Webex Calling to a Local Gateway. A Registration-based local gateway works on reusing a connection created from the local gateway. Destination port is customer chosen Configure trunks | |||
Call media to Webex Calling (STUN, SRTP/SRTCP, T38) | Passerelle locale NIC externe | 8000-48199†* | UDP | Reportez-vous à Sous-réseaux IP pour les services d’appel Webex. |
5004, 9000 (STUN Ports) Audio : 8500-8599 Vidéo : 8600-8699 19560-65535 (SRTP over UDP) |
| |||
Devices†* | 19560-19661 | ||||||||
Webex App†* |
Audio : 8500-8599 Vidéo : 8600-8699 | ||||||||
Call media from Webex Calling (SRTP/SRTCP, T38) |
Webex Calling address range. Refer to IP Subnets for Webex Calling Services | 19560-65535 (SRTP over UDP) | UDP | IP or IP range chosen by customer for their Local Gateway | Media port range chosen by customer for their Local Gateway | ||||
Signalisation d’appel vers la passerelle RTCP (SIP TLS) | NIC interne de la passerelle locale | 8000-65535 | TCP | Votre RTCP ITSP GW ou Unified CM | Dépend de l’option RTCP (par exemple, typiquement 5060 ou 5061 pour Unified CM) | ||||
Call media to PSTN gateway (SRTP/SRTCP) | NIC interne de la passerelle locale | 8000-48199†* | UDP | Votre RTCP ITSP GW ou Unified CM | Depends on the PSTN option (for example, typically 5060 or 5061 for Unified CM) | ||||
Configuration du dispositif et gestion du firmware (périphériques Cisco) | Périphériques Webex Calling | Éphémère | TCP |
3.20.185.219 3.130.87.169 3.134.166.179 52.26.82.54 72.163.10.96/27 72.163.15.64/26 72.163.15.128/26 72.163.24.0/23 72.163.10.128/25 173.37.146.128/25 173.36.127.0/26 173.36.127.128/26 173.37.26.0/23 173.37.149.96/27 192.133.220.0/26 192.133.220.64/26 | 443, 6970, 80 |
Required for the following reasons:
| |||
Webex App configuration | Webex App applications | Éphémère | TCP |
62.109.192.0/18 64.68.96.0/19 150.253.128.0/17 207.182.160.0/19 | 443, 8443 | Used for Id broker Authentication, Webex App configuration services for clients, Browser based web access for self-care AND Administrative interface access.
| |||
Synchronisation de l’heure du périphérique (NTP) | Périphériques Webex Calling | 51494 | UDP | Reportez-vous à Sous-réseaux IP pour les services d’appel Webex. | 123 | Ces adresses IP sont nécessaires pour la synchronisation temporelle des périphériques (téléphones MPP, ATA et SPA ATA). | |||
Domain Name System (DNS) resolution | Webex Calling devices, Webex App, and Webex Devices | Éphémère | UDP et TCP | Défini par l’organisateur | 53 | Used for DNS lookups to discover the IP addresses of Webex Calling services in the cloud. Even though typical DNS lookups are done over UDP, some may require TCP, if the query responses can’t fit it in UDP packets. | |||
Network Time Protocol (NTP) | Webex App and Webex Devices | 123 | UDP | Défini par l’organisateur | 123 | Synchronisation de l'heure | |||
Cscan | Web based Network readiness Pre-qualification tool for Webex Calling | Éphémère | TCP | Reportez-vous à Sous-réseaux IP pour les services d’appel Webex. | 8934 and 443 | Web based Network readiness Prequalification tool for Webex Calling. Rendez-vous sur cscan.webex.com pour plus d’informations. | |||
UDP | 19569-19760 | ||||||||
Additional Webex Calling & Webex Aware Services (Third-Party) | |||||||||
Push notifications APNS and FCM services | Webex Calling Applications | Éphémère | TCP |
Refer to IP Subnets mentioned under the links | 443, 2197, 5228, 5229, 5230, 5223 | Notifications to Webex Apps on mobile devices (Example: When you receive a new message or when a call is answered) |
|
Quality of Service (QoS)
Allows you to enable tagging of packets from the local device or client to the Webex Calling cloud platform. QoS enables you to prioritize real-time traffic over other data traffic. Enabling this setting modifies the QoS markings for Apps and devices that use SIP signaling and media.
Source Addresses | Traffic type | Destination Addresses | Ports source | Ports de destination | DSCP Class and value |
---|---|---|---|---|---|
Application Webex | Audio |
Refer IP subnets, Domains, and URLs for Webex Calling services | 8500-8599 | 8500-8599, 19560-65535 | Expedited Forwarding (46) |
Application Webex | Vidéo | 8600-8699 | 8600-8699, 19560-65535 | Assured Forwarding 41 (34) | |
Application Webex | Signalisation | Ephémère (dépend du système d’exploitation) | 8934 | CS0 (0) | |
Webex Devices (MPPs and Room) | Audio et vidéo | 19560-19661 | 19560-65535 |
Expedited Forwarding (46) & Assured Forwarding 41 (34) | |
Périphériques Webex | Signalisation | 5060-5080 | 8934 | Class Selector 3 (24) |
|
Réunions/Messagerie Webex - Configuration réseau requise
For customers who’re using Webex Suite of cloud collaboration services, Webex cloud registered products, onboard the MPP devices to the Webex Cloud for services like Call History, Directory Search, Meetings, and Messaging. Ensure that the Domains/URLs/IP Addresses/Ports mentioned in this article are open Network Requirements for Webex Services.
Configuration réseau requise pour Webex for Government (FedRAMP)
For customers who require the list of Domains, URLs, IP address ranges and ports for Webex for Government services (FedRAMP), information can be found here: Configuration réseau requise pour Webex for Government
Network Requirements for Webex Attendant Console
For customers who are using attendant console - receptionists, attendants, and operators feature, ensure Domains/URLs/IP Addresses/Ports/Protocols are open Network requirements for attendant console
Getting started with Webex Calling Local Gateway
For customers using the Local Gateway solution with Webex Calling for premises-based PSTN and third-party SBCs interoperability, read through the article Get Started with Local Gateway
Références
To know What's new in Webex Calling, see What's new in Webex Calling
For Security requirements for Webex Calling, see Article
Webex Calling Media Optimization with Interactive Connectivity Establishment (ICE) Article
Historique des révisions du document
Date |
Nous avons apporté les modifications suivantes à cet article | ||
---|---|---|---|
July 25, 2024 |
Added back the 52.26.82.54 IP subnet as it’s required for the Cisco ATA device configuration and firmware management. | ||
July 18, 2024 |
Updated with the following details:
| ||
June 28, 2024 |
Updated the usage of both SRTP/ SRTCP port ranges for the Webex Calling Media specification. | ||
June 11, 2024 |
Removed the "huton-dev.com" domain as it’s not used. | ||
May 06, 2024 |
Updated the usage of both SRTP/ SRTCP port ranges for the Webex Calling Media specification. | ||
April 03, 2024 | Updated the IP Subnets for Webex Calling services with 163.129.0.0/17 to accommodate Webex Calling market expansion for the India region. | ||
December 18, 2023 |
Included the sudirenewal.cisco.com URL and port 80 requirement for device configuration and firmware management of the Cisco MPP phone's MIC renewal. | ||
December 11, 2023 |
Updated the IP Subnets for Webex Calling services to include a larger set of IP addresses. 150.253.209.128/25 – changed to 150.253.128.0/17 | ||
November 29, 2023 |
Updated the IP Subnets for Webex Calling services to include a larger set of IP addresses to accommodate Webex Calling region expansion for future growth. 144.196.33.0/25 – changed to 144.196.0.0/16 The IP Subnets for Webex Calling services sections under Webex Calling (SIP TLS) and Call media to Webex Calling (STUN, SRTP) is updated for clarity on certificate-based trunking and the firewall requirements for Local Gateway. | ||
14 août 2023 |
We’ve added the following IP addresses 144.196.33.0/25 and 150.253.156.128/25 to support increased capacity requirements for Edge and Webex Calling Services.
| ||
July 5, 2023 |
Added the link https://binaries.webex.com to install the Cisco MPP Firmware. | ||
7 mars 2023 |
We've overhauled the entire article to include:
| ||
5 mars 2023 |
Updating the article to include the following:
| ||
15 novembre 2022 |
We’ve added the following IP addresses for device configuration and firmware management (Cisco devices):
We’ve removed the following IP addresses from device configuration and firmware management (Cisco devices):
| ||
November 14, 2022 |
Added the IP subnet 170.72.242.0/24 for the Webex Calling service. | ||
Le 8 septembre 2022 |
The Cisco MPP Firmware transitions to use https://binaries.webex.com as the host URL for MPP firmware upgrades in all regions. Ce changement améliore les performances de mise à niveau du microprogramme (firmware). | ||
30 août 2022 |
Removed reference to Port 80 from Device configuration and firmware management (Cisco devices), Application configuration and CScan rows in the Port table as there’s no dependency. | ||
18 août 2022 |
Aucun changement dans la solution. Mise à jour des ports de destination 5062 (requis pour le tronc certificat), 8934 (requis pour le tronc basé sur l’enregistrement) pour la signalisation d’appel Webex Calling (SIP TLS). | ||
26 juillet 2022 |
Ajout de l’adresse IP 54.68.1.225, qui est requise pour la mise à niveau du firmware des périphériques Cisco 840/860. | ||
21 juillet 2022 |
Mise à jour des ports de destination 5062, 8934 pour la signalisation d’Webex Calling (SIP TLS). | ||
14 juillet 2022 |
Added the URLs that support a complete function of Webex Aware services. Added the IP subnet 23.89.154.0/25 for the Webex Calling service. | ||
27 juin 2022 |
Mise à jour du domaine et des URL pour Webex Calling services : *.broadcloudpbx.com *.broadcloud.com.au *.broadcloud.eu *.broadcloudpbx.net | ||
15 juin 2022 |
Ajout des ports et des protocoles suivants sous Adresses IP et ports pour Webex Calling services :
Informations mises à jour dans Webex Meetings/Messagerie - Section Exigences réseau | ||
24 mai 2022 |
Ajout du sous-réseau IP 52.26.82.54/24 à 52.26.82.54/32 pour le service Webex Calling | ||
6 mai 2022 |
Ajout du sous-réseau IP 52.26.82.54/24 pour Webex Calling service | ||
7 avril 2022 |
Updated the Local Gateway internal and external UDP port range to 8000-48198† | ||
5 avril 2022 |
Ajout des sous-réseaux IP suivants pour Webex Calling service :
| ||
29 mars 2022 |
Ajout des sous-réseaux IP suivants pour Webex Calling service :
| ||
20 septembre 2021 |
Ajout de 4 nouveaux sous-réseaux IP Webex Calling service :
| ||
2 avril 2021 |
Added *.ciscospark.com under Domains and URLs for Webex Calling Services to support Webex Calling use cases in the Webex app. | ||
25 mars 2021 |
Ajout de 6 nouvelles plages IP pour activate.cisco.com, qui entreront en vigueur à partir du 8 mai 2021.
| ||
5 mars 2020 |
Remplacement des IP discrètes de Webex Calling et des plages d’IP plus petites par des plages simplifiées dans un tableau séparé pour faciliter la compréhension de la configuration du pare-feu. | ||
26 février 2021 |
Ajout de 5004 comme port de destination pour les médias d’appel à Webex Calling (STUN, SRTP) pour prendre en charge la connectivité interactive d’Appelants (ICE) qui sera disponible dans Webex Calling en avril 2021. | ||
22 février 2021 |
Les domaines et les URLs sont maintenant listés dans un tableau séparé. IP Addresses and Ports table are adjusted to group IP addresses for the same services. Adding the Notes column to the IP Addresses and Ports table that aids in understanding the requirements. Moving the following IP addresses to simplified ranges for device configuration and firmware management (Cisco devices):
Adding the following IP addresses for Application Configuration because Cisco Webex client points to a newer DNS SRV in Australia in March 2021.
| ||
21 janvier 2021 |
We’ve added the following IP addresses to device configuration and firmware management (Cisco devices):
We’ve removed the following IP addresses from device configuration and firmware management (Cisco devices):
We’ve added the following IP addresses to the application configuration:
We’ve removed the following IP addresses from the application configuration:
We’ve removed the following port numbers from the application configuration:
We’ve added the following domains to the application configuration:
| ||
23 décembre 2020 |
Ajout de nouvelles adresses IP de configuration des applications aux images de référence des ports. | ||
22 Décembre 2020 |
Mise à jour de la ligne Configuration des applications dans les tableaux pour inclure les adresses IP suivantes : 135.84.171.154 et 135.84.172.154. Hid the network diagrams until these IP addresses are added. | ||
11 décembre 2020 |
Mise à jour des lignes Configuration des périphériques et gestion des micrologiciels (périphériques Cisco) et Configuration des applications pour les domaines canadiens pris en charge. | ||
16 Octobre 2020 |
Mise à jour des entrées de signalisation d’appel et de média avec les adresses IP suivantes :
| ||
23 septembre 2020 |
Sous CScan, remplacement de 199.59.64.156 par 199.59.64.197. | ||
14 août 2020 |
Ajout d’adresses IP supplémentaires pour prendre en charge l’introduction de centres de données au Canada : Signalisation d’appel vers Webex Calling (SIP TLS)–135.84.173.0/25,135.84.174.0/25, 199.19.197.0/24, 199.19.199.0/24 | ||
12 août 2020 |
Ajout d’adresses IP supplémentaires pour prendre en charge l’introduction de centres de données au Canada :
| ||
22 juillet 2020 |
Ajout de l’adresse IP suivante pour prendre en charge l’introduction des centres de données au Canada : 135.84.173.146 | ||
9 juin 2020 |
Nous avons apporté les modifications suivantes à l’entrée CScan :
| ||
11 mars 2020 |
We added the following domain and IP addresses to the application configuration:
Nous avons mis à jour les domaines suivants avec des adresses IP supplémentaires pour la configuration des périphériques et la gestion des micrologiciels :
| ||
27 février 2020 |
Nous avons ajouté le domaine et les ports suivants à la configuration du dispositif et à la gestion du micrologiciel : cloudupgrader.webex.com—443, 6970 |