准备工作

  • Your administrator must have enabled the voicemail settings for you to access and configure them. If you don’t find any voicemail settings, check with your administrator.
  • Calling option in User Hub

    You can configure all the voicemail settings from the User Hub by navigating to Settings > Calling > Voicemail.

    The Calling option is available only for users with the Webex Calling license. If you don’t see the Calling option, it means you don’t have the Webex Calling license.

    If you want to find out which calling service you’re set up with, you can check from the Webex App. For more details, see Find out what calling service you have.

  • 语音邮件转发

    When your administrator has enabled this setting, you can forward voice messages to another users’ number or extension. When disabled, you can't forward voice messages, use an external mailbox, or send a copy of the voice message to a specified email address.

  • 语音邮件删除

    Your administrator can set the voice messages expiration period (1-180 days), and the conditions for expired messages deletion.

    When your administrator has configured the settings, the voice messages over 180 days old are archived automatically. If you require access to archived voice messages, contact your administrator.

    If the administrator hasn't configured the settings, you need to manually delete the messages.

  • Voicemail passcode or PIN

    Your administrator can set the minimum number of days (1–7) between the passcode changes, and the passcode expiration period (15–180 days). If the administrator hasn't configured the settings, your passcode never expires.

    You can reset your voicemail passcode from the User Hub, see Set or reset your voicemail PIN for more details. To listen to your voice messages from User Hub, see Listen to your voice messages.

If you find any issues in configuring the settings, contact your administrator. Your administrator can also configure all the voicemail settings on your behalf.

Enable voicemail

To receive voicemail and fax messages, and configure various voicemail settings such as sending calls to voicemail, enabling notification, and setting message storage, you need to enable the voicemail toggle first.

1

Sign in to User Hub, then click Settings > Calling > Voicemail.

2

Go to Voicemail section and turn on the toggle.

下一步

Once the voicemail toggle is enabled, you can configure various voicemail settings.

Send calls to voicemail with greetings

You can set when you want to send callers to your voicemail. 例如，当您知道将要离开办公室而不能接听电话时，您可能希望将所有呼叫发送到语音邮件。

You can set a voicemail greeting which is the message that your callers hear when they reach your voicemail. 有两种类型的语音邮件问候语 -“忙时”和“无应答”。The Busy greeting is played when you’re on another call and don’t have a call waiting, and the No Answer greeting is played when you don’t answer the call.

  • The incoming calls aren’t directed to voicemail when you've enabled the call waiting.
  • 如果您已启用呼叫转移，则这些呼叫转移设置将会覆盖您配置的语音邮件设置。
1

Sign in to User Hub, then click Settings > Calling > Voicemail.

2

Go to Send calls to voicemail and choose from the following options:

  • Send all calls to voicemail—This option forwards all calls to voicemail.

  • Send calls to voicemail when the line is busy—This option forwards calls to voicemail when you’re already on a call. You can choose to set up either a default greeting or a custom greeting to play when the line is busy.

    To set the default greeting, select the Default message when busy option.

    To set your own custom personalized greeting, select the Custom message option and click Upload File to upload your audio (WAV) file or click the Record Message to record the message.

  • Send calls to voicemail when no one answers—This option forwards incoming calls to voicemail after a specified number of rings. From the drop-down list, choose the number of rings before playing the greeting. You can choose to set up either a default greeting or a custom greeting to play when no one answers the call.

    To set the default greeting, select the Default message when no answer option.

    To set your own custom personalized greeting, select the Custom message option and click the Upload File to upload your audio (WAV) file or click the Record Message to record the message.

Once you've uploaded the file or recorded the greeting, you can change it by selecting Replace File or recording another greeting. Recording a new greeting or uploading a new file overrides the previous greeting.

The audio (WAV) file must be 8Khz, 8-bit mono, CCITT µ-law, 2 MB max, .wav file format. The maximum file size is 960 KB for 90 seconds of playback.

You can also record the greetings by dialing the Voice Portal *62 from your Cisco IP Phones or Webex App.

If you select Send all calls to voicemail, you can’t select the other two options. 您可以选择在线路 忙时将呼叫发送到语音邮件，也可以选择在未选择应答选项时将呼叫发送到语音邮件。

3

单击保存。

Store your voicemail and fax messages

You can choose where you want to store your voicemail and fax messages—in the User Hub or to a specified email address as a .tiff file.

1

Sign in to User Hub, then click Settings > Calling > Voicemail.

2

Go to Message storage and select where you want to store your messages:

  • Use internal mailbox—This option allows you to access the voicemail from your phone or from the User Hub. Select Use the phone's new message indicator to enable the message waiting indicator for your desk phone.
    内部邮箱存在以下存储限制：

    • 单条消息的时长限制在 10 分钟以内

    • 邮箱的总时长限制在 100 分钟以内

  • Use external mailbox—With this option, you can enter the email address to which you want to send all the voicemails. If this option is selected, voice messages aren’t transcribed, and it can't be accessible from your phone, desktop app, and the user portal.
3

单击保存。

下一步

If your location has voicemail transcription enabled, the option Use internal Mailbox and Email a copy of the voicemail message must be selected for you to receive voicemail transcriptions. For more information, see the Set up voicemail transcription section.

启用语音邮件通知

You can set up an email id to receive notifications when a new voicemail is received.
1

Sign in to User Hub, then click Settings > Calling > Voicemail.

2

Go to Notifications and toggle on Receive voicemail notifications.

3

选择以下选项之一：

  • To receive email notifications, select Email and enter the email address to send notifications to.
  • To receive text message notifications, select Text message and enter the phone number and choose the service provider.

    If you want to receive notifications through text, check with your wireless provider for their email to text process.

4

To send a voicemail to an email address with the message attached, go to Additional settings, toggle on Email a copy of the voicemail message, and enter the mail address to send the transcriptions to.

如果禁用语音邮件转接，则此选项可能不可用。

5

单击保存。

下一步

If your location has voicemail transcription enabled, the option Use Internal Mailbox and Email a copy of the voicemail message must be selected for you to receive voicemail transcriptions. For help, see Set up voicemail transcription section.

Set up voicemail transcription

With voicemail transcription, you can receive an email with the voicemail transcription in the body of the email and .wav file as a voicemail attachment. You can also see the voicemail transcription in Webex App.

准备工作

  • The supported languages are:

    • 英语
    • 德语
    • 西班牙语
    • 法语

  • 管理员必须为您的位置启用语音邮件文字记录。

1

Sign in to User Hub, then click Settings > Calling > Voicemail.

2

Go to Message storage and select Use internal mailbox.

3

Go to Additional settings and toggle on Email a copy of the voicemail message, and enter the mail address to send the transcriptions to.

如果禁用语音邮件转接，则此选项可能不可用。

4

单击保存。

You can use the following image as a helpful visual of an email notification for voicemail transcription.

语音邮件文字记录不可用的原因

The system doesn’t produce a transcript if the overall quality or accuracy of the transcript is poor. It may happen if the audio quality was bad due to the following constraints:

  • 背景噪音

  • 听不清

  • Unsupported language words present in the audio

    Voicemail transcription is available only for voicemails left in the supported languages.

  • 口音重

Limitations with voicemail transcription

  • When you forward or reply to a voicemail from the voice portal, the voicemail isn’t transcribed.

  • When you compose a voicemail and send to another user from the voice portal, the voicemail isn’t transcribed.

允许主叫方通过语音邮件问候语转接

您可以允许主叫方在收到语音邮件问候语时按 0 并转接到您选择的其他电话号码。

如果启用此功能，请务必录制语音邮件问候语并为主叫方提供相应的指导。例如，“要联系我的助理，请按 0”。

1

Sign in to User Hub, then click Settings > Calling > Voicemail.

2

Go to Additional settings and toggle on Transfer on '0' to another phone number, and enter the phone number to which callers to be transferred.

3

单击保存。

Set up to receive fax messages

Fax messaging allows you to receive direct inbound faxes from the voicemail service.

Faxes are stored in a shared storage area along with voice messages. 存储容量为 100 分钟的语音邮件或 1000 页的传真消息。Make sure to allocate space for new fax messages and archive wisely.

准备工作

The fax messaging option appears only if your administrator has enabled the feature for you.

1

Sign in to User Hub, then click Settings > Calling > Voicemail.

2

Go to Fax messaging and turn on the toggle.

If the fax messaging is enabled by the admin, the toggle is on by default.

Your fax number and extension appear.

3

单击保存。