Više informacija o XML API 41 potražite u članku Pregled API ispravki za Cisco Webex sastanke (API 41)

Ovaj članak sadrži ispravke i promene za IZDANJA XML API mesečnog SP-a.

Više informacija o XML API 40 potražite u članku Pregled API ispravki za Cisco Webex sastanke (API 40).

Za ispravke za XML API 11 SP9 i starije verzije posetite lokaciju Cisco DevNet.

Ispravke za XML API 39.11.0

Kliknite ovde da biste preuzeli XML API 39.11 šemu.

LstSummaryUser može da izvrši upit nad korisničkim nalozima po poslednjem izmenjenom vremenu

Nadograđujemo LstSummaryUser API da biste mogli da dozvolite korisnicima da izvršavaju upit nad korisničkim nalozima na osnovu vremena poslednje izmene. Tri nova elementa, modifiedDateStart, modifiedDateEnd I lastModifiedTime, su dodati API-u.


Maksimalni vremenski opseg za ovaj upit je 90 dana. Ako unesete vremenski opseg koji je veći od 90 dana, pojavi se greška: 999999 opseg datuma je 90 dana za izmenjeni upit za datum.

Api-je koji utiču na to:

  • LstSummaryUser

LastSummaryUser Primer zahteva:

<?xml version="1.0" encoding="UTF-8"?>
<message xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:serv="http://www.webex.com/schemas/2009/05/service">
<header>
  <securityContext>
    <siteName>Site_Name</siteName>
    <webExID>SiteAdmin</webExID>
    <password>Password</password>
    <partnerID>webexpartner</partnerID>
  </securityContext>
</header>
<body>
    <bodyContent xsi:type="java:com.webex.service.binding.user.LstsummaryUser">
        <dataScope>
            <modifiedDateStart>10/01/2019 09:24:54</modifiedDateStart>
            <modifiedDateEnd>11/30/2019 09:24:54</modifiedDateEnd>
            <timeZoneID>4</timeZoneID>
        </dataScope>
    </bodyContent>
</body>
</message>

LstSummaryUser Primer odgovora:

<?xml version="1.0" encoding="UTF-8"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:use="http://www.webex.com/schemas/2002/06/service/user">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xsi:type="use:lstsummaryUserResponse" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <use:user>
                <use:userID>**5124***</use:userID>
                <use:webExId>***MR***</use:webExId>
                <use:firstName>***MR***</use:firstName>
                <use:lastName>***est***</use:lastName>
                <use:email>***est***@qa.webex.com</use:email>
                <use:userRoleType>HOST</use:userRoleType>
                <use:registrationDate>06/19/2016 22:13:06</use:registrationDate>
                <use:active>DEACTIVATED</use:active>
                <use:timeZoneID>4</use:timeZoneID>
                <use:meetingTypes>
                    <use:meetingType>3</use:meetingType>
                    <use:meetingType>9</use:meetingType>
                    <use:meetingType>10</use:meetingType>
                    <use:meetingType>11</use:meetingType>
                    <use:meetingType>13</use:meetingType>
                    <use:meetingType>14</use:meetingType>
                    <use:meetingType>102</use:meetingType>
                </use:meetingTypes>
                <use:lastLoginTime>10/19/2019 23:13:14</use:lastLoginTime>
                <use:lastModifiedTime>11/11/2019 19:11:11</use:lastModifiedTime>
            </use:user>

Ispravke za XML API 39.10.0

Kliknite ovde da biste preuzeli XML API 39.10 šemu.

GetSessionInfo i GetUserCard daje CAPTCHA kôd prilikom korišćenja anonimnog pristupa

Kao bezbednosna ispravka, poboljšali smo GetSessionInfo i GetUserCard API sa CAPTCHA zaštitom od odgovora koda. Ako vaše aplikacije pozovu API koristeći anonimni pristup, poboljšajte aplikaciju da biste podržali captCHA unos koda.

Api-je koji utiču na to:

  • GetSessionInfo

  • GetUserCard

CAPTCHA ispravke bezbednosti i odgovora:

GetSessionInfo Odgovor bez CAPTCHA primera:

<?xml version="1.0" encoding="ISO-8859-1"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ep="http://www.webex.com/schemas/2002/06/service/ep" xmlns:meet="http://www.webex.com/schemas/2002/06/service/meeting">
    <serv:header>
        <serv:response>
            <serv:result>FAILURE</serv:result>
            <serv:reason>Corresponding Meeting not found</serv:reason>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
            <serv:exceptionID>060001</serv:exceptionID>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent/>
    </serv:body>
</serv:message>

GetSessionInfo Odgovor sa CAPTCHA primerom:

<?xml version="1.0" encoding="ISO-8859-1"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ep="http://www.webex.com/schemas/2002/06/service/ep" xmlns:meet="http://www.webex.com/schemas/2002/06/service/meeting">
    <serv:header>
        <serv:response>
            <serv:result>FAILURE</serv:result>
            <serv:reason>Corresponding Meeting not found</serv:reason>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
            <serv:exceptionID>060001</serv:exceptionID>
            <serv:CAPTCHAID>SDDHEEfgkerwAAAI****qHS****Nfx_d34znF8RdVHzrsMIYFeuArjD96Q2:234322374320JGUBE349924</serv:CAPTCHAID>
           <serv:CAPTCHAImage>
                iVBORw0KGgoAAAANSUhEUgAAAHgAAAAyCAMAAACgee/qAAADAFBMVEUAAAAAADMAAGYAAJkAAMwAAP8AMwAAMzMAM2YA
                ...........
                maorF0PESWQ15APDKJ74YLs/hlGmaRGeJuRxvyyg8smcK3veB/v5sueF/pxD8H4J/A0HPu+ZUFb7SAAAAAElFTkSuQmCC
            </serv:CAPTCHAImage>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent/>
    </serv:body>
</serv:message>

Ako dobijete CAPTCHA odgovor i nastavite da zovete API, uključite CAPTCHAID i CAPTCHAWord u vaš API zahtev:

<serv:message xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:serv="http://www.webex.com/schemas/2002/06/service">
<header>
<securityContext>
    <siteName>sqdemo6</siteName>
    <CAPTCHAID>SDDHEEfgkerwAAAI****qHS****Nfx_d34znF8RdVHzrsMIYFeuArjD96Q2:234322374320JGUBE349924</CAPTCHAID>
    <CAPTCHAWord>pyjihk</CAPTCHAWord>
</securityContext>
</header>
<body>
    <bodyContent xsi:type="java:com.webex.service.binding.ep.GetSessionInfo">
        <sessionKey>715801743</sessionKey>
    </bodyContent>
</body>
</serv:message>

GetSessionInfo Odgovor na Netačan CAPTCHAID i CAPTCHAWord Primer:

<?xml version="1.0" encoding="ISO-8859-1"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ep="http://www.webex.com/schemas/2002/06/service/ep" xmlns:meet="http://www.webex.com/schemas/2002/06/service/meeting">
    <serv:header>
        <serv:response>
            <serv:result>FAILURE</serv:result>
            <serv:reason>CAPTCHA ID and word are invalid or missing</serv:reason>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
            <serv:exceptionID>030113</serv:exceptionID>
            <serv:CAPTCHAID>SDDHEEfgkerwAAAI****qHS****Nfx_d34znF8RdVHzrsMIYFeuArjD96Q2:234322374320JGUBE349924</serv:CAPTCHAID>
           <serv:CAPTCHAImage>
                iVBORw0KGgoAAAANSUhEUgAAAHgAAAAyCAMAAACgee/qAAADAFBMVEUAAAAAADMAAGYAAJkAAMwAAP8AMwAAMzMAM2YA
                ...........
                maorF0PESWQ15APDKJ74YLs/hlGmaRGeJuRxvyyg8smcK3veB/v5sueF/pxD8H4J/A0HPu+ZUFb7SAAAAAElFTkSuQmCC
            </serv:CAPTCHAImage>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent/>
    </serv:body>
</serv:message>

LstSummaryUser podrška za vraćanje URL adresa lične sobe

Dodali smo novi element odgovora, personalMeetingRoomURL, u LstSummaryUser API.

LstSummaryUser Primer odgovora:

Ispravke za XML API 39.9.0

Kliknite ovde da biste preuzeli XML API 39.9 šemu.

Podrška za kratke SIP URL adrese za lične sale za sastanke (PMR)

Podrška za kratki SIP URL format za PMR utiče na GetSessionInfo, GetMeeting, GetUser I GetMe Apis. Novi element odgovora pod imenom displayMeetingUrl je dodato u GetUser i GetMe APIs, i već je prisutan u GetSessionInfo i GetMeeting. displayMeetingUrl daje PMR URL adresu korisnika.

Api-je koji utiču na to:

  • GetSessionInfo

  • GetMeeting

  • GetUser

  • GetMe

GetUser Primer odgovora:

GetMe Primer odgovora:

GetSessionInfo vraća neophodne elemente za anonimni pristup

Kao bezbednosni zahtev, sada mogu da se vrate samo neophodni elementi GetSessionInfo za anonimni pristup.

GetSessionInfo Primer odgovora:

<serv:bodyContent xsi:type="ep:getSessionInfoResponse" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <ep:status>NOT_INPROGRESS</ep:status>
    <ep:sessionkey>715952675</ep:sessionkey>
    <ep:accessControl>
        <ep:listStatus>PUBLIC</ep:listStatus>
        <ep:registration>false</ep:registration>
        <ep:passwordReq>true</ep:passwordReq>
        <ep:registrationURL>https://sqdemo6.dmz.webex.com/ec3300/eventcenter/enroll/register.do?loadFlag=1&amp;reqFlag=1&amp;confId=123203663769372547&amp;siteurl=sqdemo6</ep:registrationURL>
        <ep:registrationURLForMobile>https://sqdemo6.dmz.webex.com/ec3300/eventcenter/enroll/mobileRegister.do?formId=0&amp;formType=0&amp;loadFlag=1&amp;from=mobileClient&amp;siteurl=sqdemo6&amp;confId=123203663769372547</ep:registrationURLForMobile>
    </ep:accessControl>
    <ep:metaData>
        <ep:confName>Anony_Meeting_Retuning</ep:confName>
        <ep:serviceType>MeetingCenter</ep:serviceType>
    </ep:metaData>
    <ep:schedule>
        <ep:startDate>03/29/2019 11:55:00</ep:startDate>
        <ep:duration>60</ep:duration>
        <ep:timeZone>GMT-07:00, Pacific (San Francisco)</ep:timeZone>
        <ep:timeZoneID>4</ep:timeZoneID>
    </ep:schedule>
    <ep:attendeeOptions>
        <ep:joinRequiresAccount>false</ep:joinRequiresAccount>
    </ep:attendeeOptions>
    <ep:isAllowJBH>true</ep:isAllowJBH>
    <ep:isCETMeeting>true</ep:isCETMeeting>
    <ep:isPersonalMeetingRoom>false</ep:isPersonalMeetingRoom>
    <ep:meetingLink>https://sqdemo6.dmz.webex.com/sqdemo6/e.php?MTID=m2399b241f12722ca325388495e845103</ep:meetingLink>
    <ep:sipURL>715952675@sqdemo6.dmz.webex.com</ep:sipURL>
    <ep:displayMeetingUrl>715952675@sqdemo6.dmz.webex.com</ep:displayMeetingUrl>
</serv:bodyContent>

Api-je koji utiču na to:

  • GetSessionInfo

Planiranje promene ponašanja sastanaka i događaja

Podrazumevano, svi planirani sastanci su sastanci omogućeni za video uređaje. Međutim, kada zakažete sastanak, ali izaberete nijednu ili drugu za zvuk sastanka, sastanak će biti zakazan kao Webex sastanak koji nije omogućen za video uređaje.

Api-je koji utiču na to:

  • CreateMeeting

  • SetMeeting

  • CreateEvent

  • SetEvent

Ispravke za XML API 39.8.0

Kliknite ovde da biste preuzeli XML API 39.8 šemu.

LsttrainingattendeeHistory sada vraća pažljivost učesnika sastanka

Novi element odgovora, attentionToDurationPercentage, je dodato u LsttrainingattendeeHistory API. LsttrainingattendeeHistory daje detalje pažljivosti učesnika sastanka. Element se vraća u ovom formatu:

<history:attentionToDurationPercentage>100</history:AttentionToDurationPercentage>

Api-je koji utiču na to:

  • LsttrainingattendeeHistory

    • attentionToDurationPercentage

    • attentionToAttendancePercentage

LsttrainingattendeeHistory Primer odgovora:

<history:endTime>04/17/2019 23:37:07</history:endTime>
<history:duration>6</history:duration>
    <history:attentionToDurationPercentage>100</history:AttentionToDurationPercentage>
    <history:attentionToAttendancePercentage>100</history:AttentionToAttendancePercentage>
<history:registered>N</history:registered>
<history:invited>N</history:invited>

GetSite sada vraća broj licenci

Obezbeđeni su novi elementi odgovora za vraćanje različitih tačaka licence u GetSite API.

Api-je koji utiču na to:

  • GetSite

    • EEActiveUserCount

    • activeCETHost

    • MCActiveUserCount

    • ECActiveUserCount

    • TCActiveUserCount

    • SCActiveUserCount

GetSiteFT i SetSiteFT Redizajn

The GetSiteFT i SetSiteFT API-i su redizajnirani tako da omogućavaju dinamičke preklopnike funkcija.

Api-je koji utiču na to:

  • GetSiteFT

  • SetSiteFT

GetSite Primer zahteva:

<?xml version="1.0" encoding="UTF-8"?>
<serv:message
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:serv="http://www.webex.com/schemas/2002/06/service"
   xsi:schemaLocation="http://www.webex.com/schemas/2002/06/service
   http://www.webex.com/schemas/2002/06/service/service.xsd">
    <header>
        <securityContext>
            <siteName>{siteName}</siteName>
            <accessToken>{This is machine account access token}</accessToken>
        </securityContext>
    </header>
    <bodyContent xsi:type="java:com.webex.service.binding.site.GetSiteFT">
        <featureToggles>
            <name>SupportCrossLaunch</name>
            <name>RemoveCMRLicenseSA</name>
        </featureToggles>
    </bodyContent>
</body>
</serv:message>

GetSite Primer odgovora:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ns1="http://www.webex.com/schemas/2002/06/service/site" xmlns:event="http://www.webex.com/schemas/2002/06/service/event">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:getSiteFTResponse">
            <ns1:featureToggles>
                <ns1:featureToggle>
                    <ns1:name>SupportCrossLaunch</ns1:name>
                    <ns1:value>false</ns1:value>
                </ns1:featureToggle>
                <ns1:featureToggle>
                    <ns1:name>RemoveCMRLicenseSA</ns1:name>
                    <ns1:value>false</ns1:value>
                </ns1:featureToggle>
            </ns1:featureToggles>
        </serv:bodyContent>
    </serv:body>
</serv:message>

SetSite Primer zahteva:

<?xml version="1.0" encoding="UTF-8"?>
<serv:message
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:serv="http://www.webex.com/schemas/2002/06/service"
   xsi:schemaLocation="http://www.webex.com/schemas/2002/06/service
   http://www.webex.com/schemas/2002/06/service/service.xsd">
    <header>
        <securityContext>
            <siteName>{siteName}</siteName>
            <accessToken>{This is machine account access token}</accessToken>
        </securityContext>
    </header>
    <body>
        <bodyContent xsi:type="java:com.webex.service.binding.site.SetSiteFT">
            <featureToggles>
                <featureToggle>
                    <name>SupportCrossLaunch</name>
                    <value>false</value>
                </featureToggle>
                <featureToggle>
                    <name>SupportPeopleInsight</name>
                    <value>true</value>
                </featureToggle>
            </featureToggles>
        </bodyContent>
    </body>
</serv:message>

SetSiteFT Primer rezone:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ns1="http://www.webex.com/schemas/2002/06/service/site" xmlns:event="http://www.webex.com/schemas/2002/06/service/event">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:setSiteFTResponse"/>
    </serv:body>
</serv:message>

Dužina opisa sastanka sada ograničena na 2500 znakova

Sledeći API sada imaju ograničenu dužinu sadržaja elementa opisa sastanka na 2500 znakova:

Api-je koji utiču na to:

  • CreateEvent

  • SetEvent

  • CreateTrainingSession

  • SetTrainingSession

Ovo je da bi se sprečilo da Cisco Webex ne može da obradi zahtev. Ako je opis sastanka duži od 2500 znakova, dobija se poruka o grešci.

Ispravke za XML API 39.5.0

Novi element videoMeshInterclusters dodato u SetSite i GetSite šeme

Novi element, videoMeshInterclusters, je dodato u SetSite Element. videoMeshInterclusters takođe sadrži tri dečija elementa videoMeshHomeCluster1, videoMeshHomeCluster2 I videoMeshHomeCluster3.

Api-je koji utiču na to:

  • SetSite

    • videoMeshInterclusters

      • videoMeshHomeCluster1

      • videoMeshHomeCluster2

      • videoMeshHomeCluster3

  • GetSite

    • videoMeshInterclusters

      • videoMeshHomeCluster1

      • videoMeshHomeCluster2

      • videoMeshHomeCluster3

SetSite Zahtevaj ispravke:

GetSite Ispravke odgovora:

Ispravke za XML API 39.3.0

Kratka SIP URL adresa u XML API- u, novi element displayMeetingUrl

Kliknite ovde da biste preuzeli XML API 39.3 šemu.

Trenutno, kada se pridružujete Webex sastanku, aplikacija ili uređaj moraju da obezbede informacije o lokaciji, što ponekad otežava pridruživanje sastancima. Ovo se naročito odnosi na pozivanje sa SIP uređaja, jer korisnik mora da upiše meeting_number@sitename.webex.com.

Da bismo olakšali pridruživanje sastancima, uklonili smo zahtev da unesemo ime lokacije sa sastanka SIP URI: meeting_number@webex.com. Da bi se zadržala kompatibilnost sa unazad, stari format radi u sipURL-u i novi format se pridodaje novom elementu displayMeetingUrl.

Api-je koji utiču na to:

  • GetMeeting

    • displayMeetingUrl

  • GetEvent

    • displayMeetingUrl

  • GetSessionInfo

    • displayMeetingUrl

GetMeeting Primer odgovora:

    <meet:isCETMeeting>true</meet:isCETMeeting>
    <meet:meetingLink>https://sqdemo.dmz.webex.com/sqdemo/j.php?MTID=m0cdefe09626ba0bec956cdf9088bff55</meet:meetingLink>
    <meet:sipURL>712296997@sqdemo.dmz.webex.com</meet:sipURL>
    <meet:displayMeetingUrl>712296997@dmz.webex.com</meet:displayMeetingUrl>
</serv:bodyContent>

GetEvent Primer odgovora:

    <event:hostType>1001001</event:hostType>
    <event:isCETMeeting>true</event:isCETMeeting>
    <event:sipURL>713847821@sqdemo.dmz.webex.com</event:sipURL>
    <event:displayMeetingUrl>713847821@dmz.webex.com</event:displayMeetingUrl>
</serv:bodyContent>

GetSessionInfo Primer odgovora:

    <ep:isCETMeeting>true</ep:isCETMeeting>
    <ep:isNextUpcomingInstance>true</ep:isNextUpcomingInstance>
    <ep:meetingLink>https://sqdemo.dmz.webex.com/sqdemo/j.php?MTID=ee7d38639d0b4a9ed2eb8802cfa2810dd</ep:meetingLink>
    <ep:sipURL>713847821@sqdemo.dmz.webex.com</ep:sipURL>
    <ep:displayMeetingUrl>713847821@dmz.webex.com</ep:displayMeetingUrl>
</serv:bodyContent>

Primer e-pošte:

Dužina opisa sada ograničena na 1024 znakova

Sledeći API sada imaju ograničenu dužinu sadržaja elementa opisa na 1024 znaka:

Pogođeni API- i:

  • CreateTrainingSession

  • SetTrainingSession

  • CreateEvent

  • SetEvent

Ova promena je da bi se sprečilo da Cisco Webex ne može da obradi zahtev. Ako je opis duži od 1024 znaka, dobija se poruka o grešci: "060067 nedozvoljen opis unosa. Opis ne može da premaši maksimalnu dužinu znakova prikaza 1024."

Primer odgovora za dužinu opisa veću od 1024 znakova:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:sess="http://www.webex.com/schemas/2002/06/service/session" xmlns:train="http://www.webex.com/schemas/2002/06/service/trainingsession" xmlns:qti="http://www.webex.com/schemas/2002/06/service/trainingsessionqti" xmlns:qtiasi="http://www.webex.com/schemas/2002/06/service/trainingsessionqtiasi">
    <serv:header>
        <serv:response>
            <serv:result>FAILURE</serv:result>
            <serv:reason>
Illegal input description. The description can't exceed the maximum display characters's length 1024
            </serv:reason>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
            <serv:exceptionID>060067</serv:exceptionID>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent/>
    </serv:body>
</serv:message>

GetSessionInfo sada vraća samo osnovne informacije za lične sobe kada postoji anonimni korisnik koji koristi API

Da bismo osigurali veću bezbednost, smanjujemo količinu informacija koje je GetSessionInfo kada postoji anonimni korisnik učesnika koji koristi API. U ovoj ispravci smanjićemo sledeće elemente u API odgovoru:

Api-je koji utiču na to:

  • GetSessionInfo

    • <ep:accessControl>

  • <ep:sessionPassword>

    • <ep:telephony>

    • <ep:isAlternateHost>…</ep:isAlternateHost>

    • <ep:isCreator>…</ep:isCreator>

    • <ep:hostKey>…</ep:hostKey>

    • <ep:supportE2E>…</ep:supportE2E>

Poređenja odgovora:

<serv:bodyContent xsi:type="ep:getSessionInfoResponse" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <ep:status>NOT_INPROGRESS</ep:status>
    <ep:isLocked>false</ep:isLocked>
    <ep:sessionkey>712419789</ep:sessionkey>
    <ep:confID>120396209273701973</ep:confID>
    <ep:accessControl>
        <ep:sessionPassword></ep:sessionPassword>   <!--Removed-->
        <ep:listStatus>UNLISTED</ep:listStatus>
        <ep:registration>false</ep:registration>
        <ep:passwordReq>false</ep:passwordReq>
        <ep:isEnforceAudioPassword>false</ep:isEnforceAudioPassword>
        <ep:isEnforceAudioLogin>false</ep:isEnforceAudioLogin>
    </ep:accessControl>
    <ep:metaData>
        <ep:confName>Simon Test's Personal Room</ep:confName>
        <ep:sessionType>3</ep:sessionType>
        <ep:serviceType>MeetingCenter</ep:serviceType>
        <ep:isRecurring>false</ep:isRecurring>
        <ep:agendaFormat>TEXT</ep:agendaFormat>
        <ep:descriptionFormat>TEXT</ep:descriptionFormat>
        <ep:isException>false</ep:isException>
        <ep:seriesMeetingKey>0</ep:seriesMeetingKey>
        <ep:hasException>false</ep:hasException>
    </ep:metaData>
    <ep:telephony>    <!--Removed-->
        <ep:telephonySupport>CALLBACK</ep:telephonySupport> <!--Removed-->
        <ep:globalCallInNumbersURL>https://sqdemo6.dmz.webex.com/sqdemo6/globalcallin.php?serviceType=MC&amp;ED=0</ep:globalCallInNumbersURL>   <!--Removed-->
        <ep:tollFreeRestrictionsURL>https://www.webex.com/pdf/tollfree_restrictions.pdf</ep:tollFreeRestrictionsURL>    <!--Removed-->
        <ep:dialInSequences>AutoDialInSequence:[AccessNumber],,*00*[AccessCode]#,,,[AttendeeID]#|SilentDialInSequence:[AccessNumber],,*01*[AccessCode]#[AttendeeID]#*01*|AutoLGDialInSequence:[AccessNumber],,*00*[AccessCode]#,,,[ProfileID]#,,,[PIN]#|SilentLGDialInSequence:[AccessNumber],,*01*[AccessCode]#[ProfileID]#[PIN]#*01*|AutoLGPWDialInSequence:[AccessNumber],,*00*[AccessCode]#,,,[ProfileID]#,,,[PIN]#,,,[Password]#|SilentLGPWDialInSequence:[AccessNumber],,*01*[AccessCode]#[ProfileID]#[PIN]#[Password]#*01*</ep:dialInSequences>  <!--Removed-->
        <ep:callInNum>    <!--Removed-->
            <serv:tollNum>14085452910</serv:tollNum>    <!--Removed-->
            <serv:globalNum>  <!--Removed-->
                <serv:countryAlias>14085452912</serv:countryAlias>  <!--Removed-->
                <serv:phoneNumber>14085452912</serv:phoneNumber>    <!--Removed-->
                <serv:tollFree>false</serv:tollFree>    <!--Removed-->
                <serv:default>false</serv:default>  <!--Removed-->
            </serv:globalNum> <!--Removed-->
        </ep:callInNum>   <!--Removed-->
        <ep:labels>   <!--Removed-->
            <ep:tollFreeCallInLabel>Call-in toll-free number (US/Canada)</ep:tollFreeCallInLabel>   <!--Removed-->
            <ep:tollCallInLabel>14085452910</ep:tollCallInLabel>    <!--Removed-->
        </ep:labels>  <!--Removed-->
        <ep:isMPAudio>false</ep:isMPAudio>  <!--Removed-->
        <ep:voip>true</ep:voip> <!--Removed-->
        <ep:enableTSP>false</ep:enableTSP>  <!--Removed-->
    </ep:telephony>   <!--Removed-->
    <ep:host>
        <ep:firstName>Simon</ep:firstName>
        <ep:lastName>Test</ep:lastName>
        <ep:email>simon0@qa.webex.com</ep:email>
        <ep:webExId>Simon</ep:webExId>
        <ep:allowAnyoneHostMeeting>false</ep:allowAnyoneHostMeeting>
    </ep:host>
    <ep:schedule>
        <ep:startDate>12/31/2068 13:00:00</ep:startDate>
        <ep:duration>720</ep:duration>
        <ep:timeZone>GMT-08:00, Pacific (San Francisco)</ep:timeZone>
        <ep:timeZoneID>4</ep:timeZoneID>
        <ep:openTimeInSec>0</ep:openTimeInSec>
    </ep:schedule>
    <ep:attendeeOptions>
        <ep:joinRequiresAccount>false</ep:joinRequiresAccount>
    </ep:attendeeOptions>
    <ep:isAudioOnly>false</ep:isAudioOnly>
    <ep:telePresence>false</ep:telePresence>
    <ep:isAlternateHost>false</ep:isAlternateHost>  <!--Removed-->
    <ep:isCreator>true</ep:isCreator>   <!--Removed-->
    <ep:hostKey>954462</ep:hostKey> <!--Removed-->
    <ep:supportE2E>false</ep:supportE2E>    <!--Removed-->
    <ep:isAllowJBH>false</ep:isAllowJBH>
    <ep:isCETMeeting>true</ep:isCETMeeting>
    <ep:isPersonalMeetingRoom>true</ep:isPersonalMeetingRoom>
    <ep:isNextUpcomingInstance>true</ep:isNextUpcomingInstance>
    <ep:meetingLink>https://sqdemo6.dmz.webex.com/sqdemo6/j.php?MTID=m424620ac1c117e156d97665b455192ed</ep:meetingLink>
    <ep:sipURL>simon0@sqdemo6.dmz.webex.com</ep:sipURL>
    <ep:displayMeetingUrl>simon0@sqdemo6.dmz.webex.com</ep:displayMeetingUrl>
    <ep:isAutoRecord>false</ep:isAutoRecord>
</serv:bodyContent>

Ispravke za XML API 39.2.0

Novi element lastLoginTime vratio u LstSummaryUser Odgovor

Novi element odgovora, lastLoginTime, je dodato u LstSummaryUser API. lastLoginTime daje poslednje vreme prijavljivanja za svakog korisnika. Element se vraća u ovom formatu:

<lastLoginTime>04/12/2018 22:40:01**</lastLoginTime>

Api-je koji utiču na to:

  • LstSummaryUser

    • lastLoginTime

LstSummaryUser Primer odgovora:

<?xml version="1.0" encoding="UTF-8"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:use="http://www.webex.com/schemas/2002/06/service/user">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xsi:type="use:lstsummaryUserResponse" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <use:user>
                <use:userID>3469487</use:userID>
                <use:objectGUID>a14e3312-e1d1-4e41-82b9-6ddac80c9f9a</use:objectGUID>
                <use:webExId>sangeetha.swaminathan@gmail.com</use:webExId>
                <use:firstName>Sangee</use:firstName>
                <use:lastName>Gmail</use:lastName>
                <use:email>sangeetha.swaminathan@gmail.com</use:email>
                <use:userRoleType>HOST</use:userRoleType>
                <use:registrationDate>12/11/2018 14:41:27</use:registrationDate>
                <use:active>DEACTIVATED</use:active>
                <use:timeZoneID>4</use:timeZoneID>
                <use:lastLoginTime>04/12/2018 22:40:01</use:lastLoginTime>
            </use:user>
            <use:matchingRecords>
                <serv:total>1</serv:total>
                <serv:returned>1</serv:returned>
                <serv:startFrom>1</serv:startFrom>
            </use:matchingRecords>
        </serv:bodyContent>
    </serv:body>
</serv:message>

Ispravke za XML API 39.1.0

Kliknite ovde da biste preuzeli XML API 39.1.0 šemu.

Novi element apiVer dodato u GetAPIVersion API

Novi element odgovora, apiVer, je dodato u GetAPIVersion API. Ovom ispravkom, konvencija o imenovanju XML API verzije podudara se sa objedinjenim brojem verzije sa drugim oblastima proizvoda Cisco Webex. apiVer daje informacije o novoj verziji, kao što je 39.1.0 za ispravku iz januara 2019.

Api-je koji utiču na to:

  • GetAPIVersion

    • apiVer

Element apiVersion će biti depreciran 1. maja 2019. godine, a element release biće dodeljena nova XML API vrednost 1. maja 2019.

GetAPIVersion Primer odgovora:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ep="http://www.webex.com/schemas/2002/06/service/ep" xmlns:meet="http://www.webex.com/schemas/2002/06/service/meeting">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ep:getAPIVersionResponse">
            <ep:apiVersion>WebEx XML API V11.0.0</ep:apiVersion>
            <ep:release>SP22</ep:release>
            <ep:apiVer>39.1.0</ep:apiVer>
        </serv:bodyContent>
    </serv:body>
</serv:message>

Parametri štaba i HD-a uklonjeni iz XML API-ja

Svojstva štaba i HD video zapisa sada su određena na nivou lokacije, umesto da budu utvrđena na nivou korisnika. Dve opcije za ove parametre se zanemaruju prilikom slanja zahteva od sledećih API-ja:

  • CreateMeeting

  • SetMeeting

  • CreateTrainingSession

  • SetTrainingSession

The GetMeeting i GetTrainingSession API-i i dalje vraćaju dve opcije (odlučene po nivou lokacije i nivou korisnika) da bi izbegli razbijanje postojećeg koda.

Novi element uploadLogFileUrl dodat metapodacima lokacije vraćenim u aplikaciju na radnoj površini

Novi element uploadLogFileUrl je dodat odgovor vraćen aplikaciji na radnoj površini kada pozove getSite API na XML API serveru. Aplikacija na radnoj površini može da otpremi datoteku evidencije u uploadLogFileUrl.

Api-je koji utiču na to:

  • GetSite

    • uploadLogFileUrl

GetSite Primer odgovora:

<?xml version="1.0" encoding="UTF-8"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ns1="http://www.webex.com/schemas/2002/06/service/site" xmlns:event="http://www.webex.com/schemas/2002/06/service/event">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xsi:type="ns1:getSiteResponse" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ns1:siteInstance>
                <ns1:metaData>
                    <ns1:isEnterprise>true</ns1:isEnterprise>
                    <ns1:serviceType>Meeting Center</ns1:serviceType>
                    <ns1:serviceType>Event Center</ns1:serviceType>
                    <ns1:serviceType>Training Center</ns1:serviceType>
                    <ns1:serviceType>Support Center</ns1:serviceType>
                    <ns1:meetingTypes>
                        <ns1:meetingTypeID>9</ns1:meetingTypeID>
                        <ns1:meetingTypeName>ONS</ns1:meetingTypeName>
                        <ns1:hideInScheduler>false</ns1:hideInScheduler>
                    </ns1:meetingTypes>
                    <ns1:meetingTypes>
                        <ns1:meetingTypeID>11</ns1:meetingTypeID>
                        <ns1:meetingTypeName>TRS</ns1:meetingTypeName>
                        <ns1:hideInScheduler>false</ns1:hideInScheduler>
                    </ns1:meetingTypes>
                    <ns1:meetingTypes>
                        <ns1:meetingTypeID>13</ns1:meetingTypeID>
                        <ns1:meetingTypeName>SC3</ns1:meetingTypeName>
                        <ns1:hideInScheduler>false</ns1:hideInScheduler>
                    </ns1:meetingTypes>
                    <ns1:meetingTypes>
                        <ns1:meetingTypeID>16</ns1:meetingTypeID>
                        <ns1:meetingTypeName>AUO</ns1:meetingTypeName>
                        <ns1:hideInScheduler>false</ns1:hideInScheduler>
                    </ns1:meetingTypes>
                    <ns1:meetingTypes>
                        <ns1:meetingTypeID>214</ns1:meetingTypeID>
                        <ns1:meetingTypeName>PRO</ns1:meetingTypeName>
                        <ns1:hideInScheduler>false</ns1:hideInScheduler>
                    </ns1:meetingTypes>
                    <ns1:siteName>sqdemo28</ns1:siteName>
                    <ns1:brandName>sqdemo28</ns1:brandName>
                    <ns1:brandName>sqdemo28-de</ns1:brandName>
                    <ns1:brandName>sqdemo28-en</ns1:brandName>
                    <ns1:brandName>sqdemo28-fr</ns1:brandName>
                    <ns1:region>France</ns1:region>
                    <ns1:currency>French Francs</ns1:currency>
                    <ns1:timeZoneID>4</ns1:timeZoneID>
                    <ns1:timeZone>GMT-08:00, Pacific (San Jose)</ns1:timeZone>
                    <ns1:parterID>7Dsupoc6DOfzpgcNViYvUA</ns1:parterID>
                    <ns1:webDomain>sqwd</ns1:webDomain>
                    <ns1:meetingDomain>sqmd</ns1:meetingDomain>
                    <ns1:telephonyDomain>sqtd</ns1:telephonyDomain>
                    <ns1:pageVersion>T33L</ns1:pageVersion>
                    <ns1:clientVersion>T33L</ns1:clientVersion>
                    <ns1:pageLanguage>FRENCH</ns1:pageLanguage>
                    <ns1:activateStatus>true</ns1:activateStatus>
                    <ns1:webPageType>J2EE</ns1:webPageType>
                    <ns1:iCalendar>true</ns1:iCalendar>
                    <ns1:myWebExDefaultPage>My Meetings</ns1:myWebExDefaultPage>
                    <ns1:componentVersion>cmp3300</ns1:componentVersion>
                    <ns1:accountNumLimit>999999</ns1:accountNumLimit>
                    <ns1:activeUserCount>40</ns1:activeUserCount>
                    <ns1:displayMeetingActualTime>false</ns1:displayMeetingActualTime>
                    <ns1:displayOffset>true</ns1:displayOffset>
                    <ns1:supportWebEx11>false</ns1:supportWebEx11>
                </ns1:metaData>
                <ns1:ucf>
                    <ns1:ucfConfiguration>UCF 2.1</ns1:ucfConfiguration>
                </ns1:ucf>
                <ns1:clientPlatforms>
                    <ns1:msWindows>true</ns1:msWindows>
                    <ns1:macOS9>true</ns1:macOS9>
                    <ns1:macOSX>true</ns1:macOSX>
                    <ns1:sunSolaris>true</ns1:sunSolaris>
                    <ns1:linux>true</ns1:linux>
                    <ns1:hpUnix>false</ns1:hpUnix>
                    <ns1:java>true</ns1:java>
                    <ns1:palm>false</ns1:palm>
                </ns1:clientPlatforms>
                <ns1:resourceRestrictions>
                    <ns1:isLicenseManager>true</ns1:isLicenseManager>
                    <ns1:concurrentLicense>0</ns1:concurrentLicense>
                    <ns1:fileFolderCapacity>1000</ns1:fileFolderCapacity>
                    <ns1:maxConcurrentEvents>0</ns1:maxConcurrentEvents>
                    <ns1:archiveStorageLimit>0</ns1:archiveStorageLimit>
                </ns1:resourceRestrictions>
                <ns1:supportAPI>
                    <ns1:autoLogin>true</ns1:autoLogin>
                    <ns1:aspAndPHPAPI>true</ns1:aspAndPHPAPI>
                    <ns1:backwardAPI>false</ns1:backwardAPI>
                    <ns1:xmlAPI>true</ns1:xmlAPI>
                    <ns1:cAPI>false</ns1:cAPI>
                    <ns1:scorm>true</ns1:scorm>
                </ns1:supportAPI>
                <ns1:myWebExConfig>
                    <ns1:myContacts>true</ns1:myContacts>
                    <ns1:myProfile>true</ns1:myProfile>
                    <ns1:myMeetings>true</ns1:myMeetings>
                    <ns1:trainingRecordings>true</ns1:trainingRecordings>
                    <ns1:folders>false</ns1:folders>
                    <ns1:eventDocument>true</ns1:eventDocument>
                    <ns1:myReport>false</ns1:myReport>
                    <ns1:myComputer>false</ns1:myComputer>
                    <ns1:personalMeetingPage>false</ns1:personalMeetingPage>
                    <ns1:myFilesStorage>1000</ns1:myFilesStorage>
                    <ns1:myComputerNumbers>0</ns1:myComputerNumbers>
                    <ns1:enableMyWebExPro>true</ns1:enableMyWebExPro>
                    <ns1:myWebExProMaxHosts>999999</ns1:myWebExProMaxHosts>
                    <ns1:restrictAccessAnyApps>false</ns1:restrictAccessAnyApps>
                    <ns1:restrictAccessAnyAppsNum>0</ns1:restrictAccessAnyAppsNum>
                    <ns1:addlAccessAnyComputersLimit>STRICT</ns1:addlAccessAnyComputersLimit>
                    <ns1:addlAccessAnyComputers>0</ns1:addlAccessAnyComputers>
                    <ns1:addlStorageLimit>STRICT</ns1:addlStorageLimit>
                    <ns1:addlStorage>0</ns1:addlStorage>
                    <ns1:myContactsPro>true</ns1:myContactsPro>
                    <ns1:myProfilePro>true</ns1:myProfilePro>
                    <ns1:myMeetingsPro>true</ns1:myMeetingsPro>
                    <ns1:trainingRecordingsPro>true</ns1:trainingRecordingsPro>
                    <ns1:foldersPro>false</ns1:foldersPro>
                    <ns1:eventDocumentPro>true</ns1:eventDocumentPro>
                    <ns1:myReportPro>true</ns1:myReportPro>
                    <ns1:myComputerPro>false</ns1:myComputerPro>
                    <ns1:personalMeetingPagePro>true</ns1:personalMeetingPagePro>
                    <ns1:myFilesStoragePro>1000</ns1:myFilesStoragePro>
                    <ns1:myComputerNumbersPro>0</ns1:myComputerNumbersPro>
                    <ns1:PMRheaderBranding>false</ns1:PMRheaderBranding>
                </ns1:myWebExConfig>
                <ns1:telephonyConfig>
                    <ns1:isTSPUsingTelephonyAPI>false</ns1:isTSPUsingTelephonyAPI>
                    <ns1:serviceName>Personal Conference No.</ns1:serviceName>
                    <ns1:participantAccessCodeLabel>Attendee access code</ns1:participantAccessCodeLabel>
                    <ns1:subscriberAccessCodeLabel>Host access code</ns1:subscriberAccessCodeLabel>
                    <ns1:attendeeIDLabel>Attendee ID</ns1:attendeeIDLabel>
                    <ns1:internetPhone>true</ns1:internetPhone>
                    <ns1:supportCallInTypeTeleconf>true</ns1:supportCallInTypeTeleconf>
                    <ns1:callInTeleconferencing>true</ns1:callInTeleconferencing>
                    <ns1:tollFreeCallinTeleconferencing>true</ns1:tollFreeCallinTeleconferencing>
                    <ns1:intlCallInTeleconferencing>true</ns1:intlCallInTeleconferencing>
                    <ns1:callBackTeleconferencing>true</ns1:callBackTeleconferencing>
                    <ns1:callInNumber>1</ns1:callInNumber>
                    <ns1:defaultTeleServerSubject>0.0.0.0</ns1:defaultTeleServerSubject>
                    <ns1:subscribeName>QA</ns1:subscribeName>
                    <ns1:subscribePassword>pass</ns1:subscribePassword>
                    <ns1:defaultPhoneLines>10</ns1:defaultPhoneLines>
                    <ns1:defaultSpeakingLines>10</ns1:defaultSpeakingLines>
                    <ns1:majorCountryCode>1</ns1:majorCountryCode>
                    <ns1:majorAreaCode>408</ns1:majorAreaCode>
                    <ns1:publicName>Call-in User</ns1:publicName>
                    <ns1:hybridTeleconference>true</ns1:hybridTeleconference>
                    <ns1:instantHelp>false</ns1:instantHelp>
                    <ns1:customerManage>false</ns1:customerManage>
                    <ns1:maxCallersNumber>500</ns1:maxCallersNumber>
                    <ns1:isSpecified>false</ns1:isSpecified>
                    <ns1:isContinue>false</ns1:isContinue>
                    <ns1:intlCallBackTeleconferencing>true</ns1:intlCallBackTeleconferencing>
                    <ns1:personalTeleconf>
                        <ns1:primaryLargeServer>
                            <serv:tollNum>14085452910</serv:tollNum>
                            <serv:globalNum>
                                <serv:countryAlias>14085452912</serv:countryAlias>
                                <serv:phoneNumber>14085452912</serv:phoneNumber>
                                <serv:tollFree>false</serv:tollFree>
                                <serv:default>false</serv:default>
                            </serv:globalNum>
                            <serv:enableServer>true</serv:enableServer>
                            <serv:tollLabel>14085452910</serv:tollLabel>
                            <serv:tollFreeLabel>Call-in toll-free number (US/Canada)</serv:tollFreeLabel>
                        </ns1:primaryLargeServer>
                        <ns1:backup1LargeServer>
                            <serv:enableServer>false</serv:enableServer>
                            <serv:tollLabel>Call-in toll number (US/Canada)</serv:tollLabel>
                            <serv:tollFreeLabel>Call-in toll-free number (US/Canada)</serv:tollFreeLabel>
                        </ns1:backup1LargeServer>
                        <ns1:backup2LargeServer>
                            <serv:enableServer>false</serv:enableServer>
                            <serv:tollLabel>Backup call-in toll number (US/Canada)</serv:tollLabel>
                            <serv:tollFreeLabel>Backup call-in toll-free number (US/Canada)</serv:tollFreeLabel>
                        </ns1:backup2LargeServer>
                        <ns1:primarySmallServer>
                            <serv:enableServer>false</serv:enableServer>
                            <serv:tollLabel>Call-in toll number (US/Canada)</serv:tollLabel>
                            <serv:tollFreeLabel>Call-in toll-free number (US/Canada)</serv:tollFreeLabel>
                        </ns1:primarySmallServer>
                        <ns1:backup1SmallServer>
                            <serv:enableServer>false</serv:enableServer>
                            <serv:tollLabel>Call-in toll number (US/Canada)</serv:tollLabel>
                            <serv:tollFreeLabel>Call-in toll-free number (US/Canada)</serv:tollFreeLabel>
                        </ns1:backup1SmallServer>
                        <ns1:backup2SmallServer>
                            <serv:enableServer>false</serv:enableServer>
                            <serv:tollLabel>Backup call-in toll number (US/Canada)</serv:tollLabel>
                            <serv:tollFreeLabel>Backup call-in toll-free number (US/Canada)</serv:tollFreeLabel>
                        </ns1:backup2SmallServer>
                        <ns1:joinBeforeHost>false</ns1:joinBeforeHost>
                    </ns1:personalTeleconf>
                    <ns1:multiMediaPlatform>true</ns1:multiMediaPlatform>
                    <ns1:multiMediaHostName>msa1mcccl01.dmz.webex.com</ns1:multiMediaHostName>
                    <ns1:broadcastAudioStream>true</ns1:broadcastAudioStream>
                    <ns1:tspAdaptorSettings>
                        <ns1:primaryLarge>
                            <ns1:enableAdaptor>false</ns1:enableAdaptor>
                            <ns1:serverIP></ns1:serverIP>
                            <ns1:mpAudio>
                                <ns1:label>Call-in number</ns1:label>
                            </ns1:mpAudio>
                            <ns1:mpAudio>
                                <ns1:label>Call-in toll-free number</ns1:label>
                            </ns1:mpAudio>
                        </ns1:primaryLarge>
                        <ns1:backup1Large>
                            <ns1:enableAdaptor>false</ns1:enableAdaptor>
                            <ns1:serverIP></ns1:serverIP>
                            <ns1:mpAudio>
                                <ns1:label>Call-in number</ns1:label>
                            </ns1:mpAudio>
                            <ns1:mpAudio>
                                <ns1:label>Call-in toll-free number</ns1:label>
                            </ns1:mpAudio>
                        </ns1:backup1Large>
                        <ns1:backup2Large>
                            <ns1:enableAdaptor>false</ns1:enableAdaptor>
                            <ns1:serverIP></ns1:serverIP>
                            <ns1:mpAudio>
                                <ns1:label>Call-in number</ns1:label>
                            </ns1:mpAudio>
                            <ns1:mpAudio>
                                <ns1:label>Call-in toll-free number</ns1:label>
                            </ns1:mpAudio>
                        </ns1:backup2Large>
                    </ns1:tspAdaptorSettings>
                    <ns1:meetingPlace>
                        <ns1:persistentTSP>false</ns1:persistentTSP>
                        <ns1:mpAudioConferencing>WithoutIntegration</ns1:mpAudioConferencing>
                    </ns1:meetingPlace>
                    <ns1:supportOtherTypeTeleconf>false</ns1:supportOtherTypeTeleconf>
                    <ns1:otherTeleServiceName>Other teleconference service</ns1:otherTeleServiceName>
                    <ns1:supportAdapterlessTSP>false</ns1:supportAdapterlessTSP>
                    <ns1:displayAttendeeID>false</ns1:displayAttendeeID>
                    <ns1:provisionTeleAccount>true</ns1:provisionTeleAccount>
                    <ns1:choosePCN>false</ns1:choosePCN>
                    <ns1:audioOnly>true</ns1:audioOnly>
                    <ns1:configTollAndTollFreeNum>false</ns1:configTollAndTollFreeNum>
                    <ns1:configPrimaryTS>false</ns1:configPrimaryTS>
                    <ns1:teleCLIAuthEnabled>false</ns1:teleCLIAuthEnabled>
                    <ns1:teleCLIPINEnabled>false</ns1:teleCLIPINEnabled>
                </ns1:telephonyConfig>
                <ns1:commerceAndReporting>
                    <ns1:trackingCode>false</ns1:trackingCode>
                    <ns1:siteAdminReport>true</ns1:siteAdminReport>
                    <ns1:subScriptionService>false</ns1:subScriptionService>
                    <ns1:isECommmerce>false</ns1:isECommmerce>
                    <ns1:customereCommerce>false</ns1:customereCommerce>
                    <ns1:isLocalTax>false</ns1:isLocalTax>
                    <ns1:localTaxName>VAT</ns1:localTaxName>
                    <ns1:localTaxtRate>0.0</ns1:localTaxtRate>
                    <ns1:holReport>1</ns1:holReport>
                </ns1:commerceAndReporting>
                <ns1:tools>
                    <ns1:businessDirectory>false</ns1:businessDirectory>
                    <ns1:officeCalendar>false</ns1:officeCalendar>
                    <ns1:meetingCalendar>true</ns1:meetingCalendar>
                    <ns1:displayOnCallAssistLink>false</ns1:displayOnCallAssistLink>
                    <ns1:displayProfileLink>true</ns1:displayProfileLink>
                    <ns1:recordingAndPlayback>true</ns1:recordingAndPlayback>
                    <ns1:recordingEditor>true</ns1:recordingEditor>
                    <ns1:publishRecordings>true</ns1:publishRecordings>
                    <ns1:instantMeeting>true</ns1:instantMeeting>
                    <ns1:emails>false</ns1:emails>
                    <ns1:outlookIntegration>true</ns1:outlookIntegration>
                    <ns1:wirelessAccess>false</ns1:wirelessAccess>
                    <ns1:allowPublicAccess>true</ns1:allowPublicAccess>
                    <ns1:ssl>true</ns1:ssl>
                    <ns1:handsOnLab>true</ns1:handsOnLab>
                    <ns1:holMaxLabs>999999</ns1:holMaxLabs>
                    <ns1:holMaxComputers>999999</ns1:holMaxComputers>
                    <ns1:userLockDown>false</ns1:userLockDown>
                    <ns1:meetingAssist>false</ns1:meetingAssist>
                    <ns1:sms>false</ns1:sms>
                    <ns1:encryption>NONE</ns1:encryption>
                    <ns1:internalMeeting>false</ns1:internalMeeting>
                    <ns1:enableTP>false</ns1:enableTP>
                    <ns1:enableTPplus>false</ns1:enableTPplus>
                    <ns1:uploadLogFileUrl>https://sqwd.webex.com/logadmin/spr.do?SiteUrl=sqdemo28&amp;LanguageId=1</ns1:uploadLogFileUrl>
                </ns1:tools>
                <ns1:custCommunications>
                    <ns1:displayType>
                        <ns1:prodSvcAnnounce>false</ns1:prodSvcAnnounce>
                        <ns1:trainingInfo>false</ns1:trainingInfo>
                        <ns1:eNewsletters>false</ns1:eNewsletters>
                        <ns1:promotionsOffers>false</ns1:promotionsOffers>
                        <ns1:pressReleases>false</ns1:pressReleases>
                    </ns1:displayType>
                    <ns1:displayMethod>
                        <ns1:email>false</ns1:email>
                        <ns1:fax>false</ns1:fax>
                        <ns1:phone>false</ns1:phone>
                        <ns1:mail>false</ns1:mail>
                    </ns1:displayMethod>
                </ns1:custCommunications>
                <ns1:trackingCodes/>
                <ns1:supportedServices>
                    <ns1:meetingCenter>
                        <ns1:enabled>true</ns1:enabled>
                        <ns1:pageVersion>mc3300</ns1:pageVersion>
                        <ns1:clientVersion>T33L</ns1:clientVersion>
                    </ns1:meetingCenter>
                    <ns1:trainingCenter>
                        <ns1:enabled>true</ns1:enabled>
                        <ns1:pageVersion>tc3300</ns1:pageVersion>
                        <ns1:clientVersion>T33L</ns1:clientVersion>
                    </ns1:trainingCenter>
                    <ns1:supportCenter>
                        <ns1:enabled>true</ns1:enabled>
                        <ns1:pageVersion>sc3300</ns1:pageVersion>
                        <ns1:clientVersion>T33L</ns1:clientVersion>
                        <ns1:webACD>true</ns1:webACD>
                    </ns1:supportCenter>
                    <ns1:eventCenter>
                        <ns1:enabled>true</ns1:enabled>
                        <ns1:pageVersion>ec3300</ns1:pageVersion>
                        <ns1:clientVersion>T33L</ns1:clientVersion>
                        <ns1:marketingAddOn>false</ns1:marketingAddOn>
                        <ns1:optimizeAttendeeBandwidthUsage>false</ns1:optimizeAttendeeBandwidthUsage>
                    </ns1:eventCenter>
                    <ns1:salesCenter>
                        <ns1:enabled>false</ns1:enabled>
                    </ns1:salesCenter>
                </ns1:supportedServices>
                <ns1:securityOptions>
                    <ns1:passwordExpires>false</ns1:passwordExpires>
                    <ns1:passwordLifetime>0</ns1:passwordLifetime>
                    <ns1:ECMeetingsUnlisted>false</ns1:ECMeetingsUnlisted>
                    <ns1:TCMeetingsUnlisted>false</ns1:TCMeetingsUnlisted>
                    <ns1:allMeetingsUnlisted>true</ns1:allMeetingsUnlisted>
                    <ns1:allMeetingsPassword>true</ns1:allMeetingsPassword>
                    <ns1:joinBeforeHost>false</ns1:joinBeforeHost>
                    <ns1:audioBeforeHost>false</ns1:audioBeforeHost>
                    <ns1:audioBeforeHostEC>false</ns1:audioBeforeHostEC>
                    <ns1:audioBeforeHostTC>false</ns1:audioBeforeHostTC>
                    <ns1:changePersonalURL>true</ns1:changePersonalURL>
                    <ns1:changeUserName>false</ns1:changeUserName>
                    <ns1:meetings>
                        <ns1:strictPasswords>true</ns1:strictPasswords>
                    </ns1:meetings>
                    <ns1:strictUserPassword>true</ns1:strictUserPassword>
                    <ns1:accountNotify>false</ns1:accountNotify>
                    <ns1:requireLoginBeforeSiteAccess>false</ns1:requireLoginBeforeSiteAccess>
                    <ns1:changePWDWhenAutoLogin>false</ns1:changePWDWhenAutoLogin>
                    <ns1:enforceBaseline>true</ns1:enforceBaseline>
                    <ns1:passwordChangeIntervalOpt>false</ns1:passwordChangeIntervalOpt>
                    <ns1:passwordChangeInterval>24</ns1:passwordChangeInterval>
                    <ns1:firstAttendeeAsPresenter>false</ns1:firstAttendeeAsPresenter>
                    <ns1:isEnableUUIDLink>true</ns1:isEnableUUIDLink>
                    <ns1:isEnableUUIDLinkForSAC>true</ns1:isEnableUUIDLinkForSAC>
                    <ns1:enforceRecordingPwdForMC>true</ns1:enforceRecordingPwdForMC>
                    <ns1:enforceRecordingPwdForEC>false</ns1:enforceRecordingPwdForEC>
                    <ns1:enforceRecordingPwdForTC>false</ns1:enforceRecordingPwdForTC>
                    <ns1:enforceRecordingPwdForMisc>true</ns1:enforceRecordingPwdForMisc>
                </ns1:securityOptions>
                <ns1:defaults>
                    <ns1:emailReminders>true</ns1:emailReminders>
                    <ns1:entryExitTone>BEEP</ns1:entryExitTone>
                    <ns1:voip>true</ns1:voip>
                    <ns1:teleconference>
                        <ns1:telephonySupport>CALLBACK</ns1:telephonySupport>
                        <ns1:tollFree>true</ns1:tollFree>
                        <ns1:intlLocalCallIn>true</ns1:intlLocalCallIn>
                    </ns1:teleconference>
                    <ns1:joinTeleconfNotPress1>false</ns1:joinTeleconfNotPress1>
                    <ns1:updateTSPAccount>false</ns1:updateTSPAccount>
                </ns1:defaults>
                <ns1:scheduleMeetingOptions>
                    <ns1:scheduleOnBehalf>true</ns1:scheduleOnBehalf>
                    <ns1:saveSessionTemplate>true</ns1:saveSessionTemplate>
                </ns1:scheduleMeetingOptions>
                <ns1:navBarTop>
                    <ns1:button>
                        <ns1:order>1</ns1:order>
                        <ns1:serviceName>Welcome</ns1:serviceName>
                    </ns1:button>
                    <ns1:button>
                        <ns1:order>2</ns1:order>
                        <ns1:enabled>true</ns1:enabled>
                        <ns1:serviceName>Meeting Center</ns1:serviceName>
                    </ns1:button>
                    <ns1:button>
                        <ns1:order>3</ns1:order>
                        <ns1:enabled>true</ns1:enabled>
                        <ns1:serviceName>Event Center</ns1:serviceName>
                    </ns1:button>
                    <ns1:button>
                        <ns1:order>4</ns1:order>
                        <ns1:enabled>true</ns1:enabled>
                        <ns1:serviceName>Support Center</ns1:serviceName>
                    </ns1:button>
                    <ns1:button>
                        <ns1:order>5</ns1:order>
                        <ns1:enabled>true</ns1:enabled>
                        <ns1:serviceName>Training Center</ns1:serviceName>
                    </ns1:button>
                    <ns1:button>
                        <ns1:order>6</ns1:order>
                        <ns1:serviceName>Site Administration</ns1:serviceName>
                    </ns1:button>
                    <ns1:button>
                        <ns1:order>7</ns1:order>
                        <ns1:enabled>false</ns1:enabled>
                        <ns1:serviceName>Sales Center</ns1:serviceName>
                    </ns1:button>
                    <ns1:displayDisabledService>true</ns1:displayDisabledService>
                </ns1:navBarTop>
                <ns1:navMyWebEx>
                    <ns1:customLinks>
                        <ns1:customLink>
                            <ns1:target>NEW</ns1:target>
                        </ns1:customLink>
                        <ns1:customLink>
                            <ns1:target>NEW</ns1:target>
                        </ns1:customLink>
                        <ns1:customLink>
                            <ns1:target>NEW</ns1:target>
                        </ns1:customLink>
                    </ns1:customLinks>
                    <ns1:partnerLinks>
                        <ns1:partnerLink>
                            <ns1:target>NEW</ns1:target>
                        </ns1:partnerLink>
                        <ns1:partnerLink>
                            <ns1:target>NEW</ns1:target>
                        </ns1:partnerLink>
                        <ns1:partnerLink>
                            <ns1:target>NEW</ns1:target>
                        </ns1:partnerLink>
                    </ns1:partnerLinks>
                    <ns1:partnerIntegration>true</ns1:partnerIntegration>
                    <ns1:support>
                        <ns1:target>NEW</ns1:target>
                    </ns1:support>
                    <ns1:training>
                        <ns1:target>NEW</ns1:target>
                    </ns1:training>
                </ns1:navMyWebEx>
                <ns1:navAllServices>
                    <ns1:customLinks>
                        <ns1:customLink>
                            <ns1:target>NEW</ns1:target>
                        </ns1:customLink>
                        <ns1:customLink>
                            <ns1:target>NEW</ns1:target>
                        </ns1:customLink>
                        <ns1:customLink>
                            <ns1:target>NEW</ns1:target>
                        </ns1:customLink>
                    </ns1:customLinks>
                    <ns1:support>
                        <ns1:name>Support</ns1:name>
                        <ns1:target>NEW</ns1:target>
                    </ns1:support>
                    <ns1:training>
                        <ns1:name>Training</ns1:name>
                        <ns1:target>NEW</ns1:target>
                    </ns1:training>
                    <ns1:supportMenu>
                        <ns1:userGuides>
                            <ns1:target>NEW</ns1:target>
                        </ns1:userGuides>
                        <ns1:downloads>
                            <ns1:target>NEW</ns1:target>
                        </ns1:downloads>
                        <ns1:training>
                            <ns1:target>NEW</ns1:target>
                        </ns1:training>
                        <ns1:contactUs>
                            <ns1:target>NEW</ns1:target>
                        </ns1:contactUs>
                        <ns1:supportMyResources>true</ns1:supportMyResources>
                    </ns1:supportMenu>
                </ns1:navAllServices>
                <ns1:passwordCriteria>
                    <ns1:mixedCase>false</ns1:mixedCase>
                    <ns1:minLength>4</ns1:minLength>
                    <ns1:minAlpha>0</ns1:minAlpha>
                    <ns1:minNumeric>0</ns1:minNumeric>
                    <ns1:minSpecial>0</ns1:minSpecial>
                    <ns1:disallowWebTextSessions>true</ns1:disallowWebTextSessions>
                    <ns1:disallowWebTextAccounts>true</ns1:disallowWebTextAccounts>
                    <ns1:disallowList>true</ns1:disallowList>
                    <ns1:disallowValue>password</ns1:disallowValue>
                    <ns1:disallowValue>passwd</ns1:disallowValue>
                    <ns1:disallowValue>pass</ns1:disallowValue>
                </ns1:passwordCriteria>
                <ns1:recordingPasswordCriteria>
                    <ns1:mixedCase>true</ns1:mixedCase>
                    <ns1:minLength>8</ns1:minLength>
                    <ns1:minAlpha>2</ns1:minAlpha>
                    <ns1:minNumeric>1</ns1:minNumeric>
                    <ns1:minSpecial>0</ns1:minSpecial>
                    <ns1:disallowWebTextSessions>false</ns1:disallowWebTextSessions>
                    <ns1:disallowList>false</ns1:disallowList>
                    <ns1:disallowValue>password</ns1:disallowValue>
                    <ns1:disallowValue>passwd</ns1:disallowValue>
                    <ns1:disallowValue>pass</ns1:disallowValue>
                </ns1:recordingPasswordCriteria>
                <ns1:accountPasswordCriteria>
                    <ns1:mixedCase>false</ns1:mixedCase>
                    <ns1:minLength>0</ns1:minLength>
                    <ns1:minNumeric>0</ns1:minNumeric>
                    <ns1:minAlpha>0</ns1:minAlpha>
                    <ns1:minSpecial>0</ns1:minSpecial>
                    <ns1:disallow3XRepeatedChar>false</ns1:disallow3XRepeatedChar>
                    <ns1:disallowWebTextAccounts>true</ns1:disallowWebTextAccounts>
                    <ns1:disallowList>true</ns1:disallowList>
                    <ns1:disallowValue>password</ns1:disallowValue>
                    <ns1:disallowValue>passwd</ns1:disallowValue>
                    <ns1:disallowValue>pass</ns1:disallowValue>
                    <ns1:disallowValue>webex</ns1:disallowValue>
                    <ns1:disallowValue>cisco</ns1:disallowValue>
                    <ns1:disallowValue>xebew</ns1:disallowValue>
                    <ns1:disallowValue>ocsic</ns1:disallowValue>
                </ns1:accountPasswordCriteria>
                <ns1:productivityTools>
                    <ns1:enable>true</ns1:enable>
                    <ns1:installOpts>
                        <ns1:autoUpdate>true</ns1:autoUpdate>
                    </ns1:installOpts>
                    <ns1:integrations>
                        <ns1:outlook>true</ns1:outlook>
                        <ns1:outlookForMac>true</ns1:outlookForMac>
                        <ns1:lotusNotes>true</ns1:lotusNotes>
                        <ns1:oneClick>true</ns1:oneClick>
                        <ns1:showSysTrayIcon>true</ns1:showSysTrayIcon>
                        <ns1:office>true</ns1:office>
                        <ns1:excel>true</ns1:excel>
                        <ns1:powerPoint>true</ns1:powerPoint>
                        <ns1:word>true</ns1:word>
                        <ns1:IE>true</ns1:IE>
                        <ns1:firefox>false</ns1:firefox>
                        <ns1:explorerRightClick>false</ns1:explorerRightClick>
                        <ns1:instantMessenger>true</ns1:instantMessenger>
                        <ns1:aolMessenger>false</ns1:aolMessenger>
                        <ns1:googleTalk>false</ns1:googleTalk>
                        <ns1:lotusSametime>true</ns1:lotusSametime>
                        <ns1:skype>true</ns1:skype>
                        <ns1:windowsMessenger>true</ns1:windowsMessenger>
                        <ns1:yahooMessenger>false</ns1:yahooMessenger>
                        <ns1:ciscoIPPhone>false</ns1:ciscoIPPhone>
                        <ns1:pcNow>false</ns1:pcNow>
                        <ns1:iGoogle>false</ns1:iGoogle>
                        <ns1:iPhoneDusting>true</ns1:iPhoneDusting>
                    </ns1:integrations>
                    <ns1:oneClick>
                        <ns1:allowJoinUnlistMeeting>true</ns1:allowJoinUnlistMeeting>
                        <ns1:requireApproveJoin>false</ns1:requireApproveJoin>
                    </ns1:oneClick>
                    <ns1:templates>
                        <ns1:useTemplate>false</ns1:useTemplate>
                    </ns1:templates>
                    <ns1:lockDownPT>
                        <ns1:lockDown>false</ns1:lockDown>
                    </ns1:lockDownPT>
                    <ns1:imSettings>
                        <ns1:attendeeInviteOther>true</ns1:attendeeInviteOther>
                    </ns1:imSettings>
                </ns1:productivityTools>
                <ns1:meetingPlace/>
                <ns1:salesCenter>
                    <ns1:allowJoinWithoutLogin>false</ns1:allowJoinWithoutLogin>
                </ns1:salesCenter>
                <ns1:connectIntegration>
                    <ns1:integratedWebEx11>false</ns1:integratedWebEx11>
                </ns1:connectIntegration>
                <ns1:video>
                    <ns1:HQvideo>true</ns1:HQvideo>
                    <ns1:maxBandwidth>MEDIUM</ns1:maxBandwidth>
                    <ns1:HDvideo>true</ns1:HDvideo>
                </ns1:video>
                <ns1:siteCommonOptions>
                    <ns1:SupportCustomDialRestriction>false</ns1:SupportCustomDialRestriction>
                    <ns1:SupportTelePresence>false</ns1:SupportTelePresence>
                    <ns1:SupportTelePresencePlus>false</ns1:SupportTelePresencePlus>
                    <ns1:EnableCloudTelepresence>true</ns1:EnableCloudTelepresence>
                    <ns1:EnableCMRForAllUsers>true</ns1:EnableCMRForAllUsers>
                    <ns1:enablePersonalMeetingRoom>true</ns1:enablePersonalMeetingRoom>
                    <ns1:SupportAlternateHost>true</ns1:SupportAlternateHost>
                    <ns1:SupportAnyoneHostMeetings>true</ns1:SupportAnyoneHostMeetings>
                </ns1:siteCommonOptions>
                <ns1:samlSSO>
                    <ns1:enableSSO>false</ns1:enableSSO>
                    <ns1:autoAccountCreation>false</ns1:autoAccountCreation>
                </ns1:samlSSO>
                <ns1:attendeeLimitation>
                    <ns1:maxInviteesNumberForMC>1000</ns1:maxInviteesNumberForMC>
                    <ns1:maxRegistrantsNumberForMC>1000</ns1:maxRegistrantsNumberForMC>
                    <ns1:maxInviteesNumberForTC>1000</ns1:maxInviteesNumberForTC>
                    <ns1:maxRegistrantsNumberForTC>1000</ns1:maxRegistrantsNumberForTC>
                    <ns1:maxInviteesNumberForEC>10000</ns1:maxInviteesNumberForEC>
                    <ns1:maxRegistrantsNumberForEC>10000</ns1:maxRegistrantsNumberForEC>
                </ns1:attendeeLimitation>
                <ns1:CISiteLicenseInfo>
                    <ns1:accountNumberLimitForCMRHost>200</ns1:accountNumberLimitForCMRHost>
                    <ns1:allowOverageForCMRHost>true</ns1:allowOverageForCMRHost>
                    <ns1:accountNumberUsedForCMRHost>40</ns1:accountNumberUsedForCMRHost>
                    <ns1:accountNumberLimitForEEHost>200</ns1:accountNumberLimitForEEHost>
                    <ns1:allowOverageForEEHost>true</ns1:allowOverageForEEHost>
                    <ns1:accountNumberUsedForEEHost>40</ns1:accountNumberUsedForEEHost>
                    <ns1:attendeeCapacityForMC>200</ns1:attendeeCapacityForMC>
                    <ns1:attendeeCapacityForTC>200</ns1:attendeeCapacityForTC>
                    <ns1:attendeeCapacityForEC>200</ns1:attendeeCapacityForEC>
                    <ns1:attendeeCapacityForSC>200</ns1:attendeeCapacityForSC>
                </ns1:CISiteLicenseInfo>
            </ns1:siteInstance>
        </serv:bodyContent>
    </serv:body>
</serv:message>

Ispravke za XML API 11.0.0 SP22

Ograničenje veličine datoteke za UploadPMRImage

Prilikom otpremanja avatara pomoću API-ja UploadPMRImage, novo ograničenje ograničava veličinu datoteke na 5 MB. Pokušaji otpremanja datoteka većih od ovoga sada će dobiti poruku o grešci: " 010100 Size of the image being uploaded is too big. Try an image smaller than 5MB in size."

Ispravke za XML API 11.0.0 SP21

Kliknite ovde da biste preuzeli XML API 11.0 SP21 šemu.

Novi element autoRecord dodato u CreateMeeting, SetMeeting, GetMeeting I LstMeeting

Novi element, nazvan autoRecord je dodato u CreateMeeting, SetMeeting, GetMeeting I LstMeeting Apis. autoRecord omogućava korisnicima da automatski zapisuju Webex sastanke direktno iz planera sastanaka. Ovo obezbeđuje granuliranost na nivou sastanka, gde je prethodnom metodu automatskog zapisivanja sastanaka moglo da se pristupi samo globalno na nivou lokacije.


The autoRecord element se primenjuje samo na Webex sastanke. Ne primenjuje se na Webex Events ili Webex Training.

Api-je koji utiču na to:

  • CreateMeeting

    • autoRecord

  • SetMeeting

    • autoRecord

  • GetMeeting

    • autoRecord

  • LstMeeting

    • autoRecord

CreateMeeting Ispravke:

autoRecord Postavku

Ponašanje prilikom automatskog zapisivanja svih sesija pomoću mrežnog snimanja je onemogućeno u administraciji lokacije

True

Automatski započni snimanje kada sastanak počne

False(Podrazumevano) ili bez elementa

Ne započinje automatski snimanje kada sastanak započne

Ako je automatsko snimanje svih sesija pomoću mrežnog snimanja omogućeno, element se zanemaruje i snimanje se automatski pokreće kada sastanak počne.

SetMeeting Ispravke:

autoRecord Postavku

Ponašanje prilikom automatskog zapisivanja svih sesija pomoću mrežnog snimanja je onemogućeno u administraciji lokacije

True

Automatski započni snimanje kada sastanak počne

False(Podrazumevano) ili bez elementa

Ne započinje automatski snimanje kada sastanak započne

Ako je automatsko snimanje svih sesija pomoću mrežnog snimanja omogućeno, element se zanemaruje i snimanje se automatski pokreće kada sastanak počne.

GetMeeting Ispravke:

autoRecord Postavku

Ponašanje prilikom automatskog zapisivanja svih sesija pomoću mrežnog snimanja je onemogućeno u administraciji lokacije

True

Automatski započni snimanje kada sastanak počne

False

Ne započinje automatski snimanje kada sastanak započne

Ako je automatsko snimanje svih sesija pomoću mrežnog snimanja omogućeno, element se zanemaruje i snimanje se automatski pokreće kada sastanak počne.

GetMeeting Primer odgovora:

LstMeeting Ispravke:

autoRecord Postavku

Ponašanje prilikom automatskog zapisivanja svih sesija pomoću mrežnog snimanja je onemogućeno u administraciji lokacije

True

Automatski započni snimanje kada sastanak počne

False

Ne započinje automatski snimanje kada sastanak započne

Ako je automatsko snimanje svih sesija pomoću mrežnog snimanja omogućeno, element se zanemaruje i snimanje se automatski pokreće kada sastanak počne.

LstMeeting Primer odgovora:

Novi element isAutoRecord dodato u GetSessionInfo API

Zajedno sa promenama navedenih API-ja, novim elementom, isAutoRecord, je dodato u GetSessionInfo API. Ovaj element se može koristiti za označavanje da li se snimanje automatski započinje kada sastanak započne.

Api-je koji utiču na to:

  • GetSessionInfo

    • isAutoRecord

GetSessionInfo Ispravke:

isAutoRecord Postavku

Ponašanje prilikom automatskog zapisivanja svih sesija pomoću mrežnog snimanja je onemogućeno u administraciji lokacije

True

Automatski započni snimanje kada sastanak počne

False

Ne započinje automatski snimanje kada sastanak započne

Ako je automatsko snimanje svih sesija pomoću mrežnog snimanja omogućeno, element se zanemaruje i snimanje se automatski pokreće kada sastanak počne.

GetSessionInfo Primer odgovora:

Ispravke za XML API 11.0.0 SP20

Kliknite ovde da biste preuzeli XML API 11.0 SP20 šemu.

Novi element returnShareToMeRecording dodato u LstRecording API zahtev


Ova promena je prethodno najavljena u XML API 11.0 SP17, ali se primenjuje na ovu ispravku.

Novi element, returnShareToMeRecording, je dodato u LstRecording API. returnShareToMeRecording je Boolean u zahtevu za LstRecording.

Ovaj novi element je dodat da bi se podržalo pronalaženje snimaka učesnika ili učesnika. returnShareToMeRecording je zastava da se pusti LstRecording API zna da mora da vrati snimke učesnika ili učesnika.

Kada returnShareToMeRecording je podešeno na True, LstRecording vraća korisnika snimka kao vlasnika, a takođe vraća korisnika snimka kao učesnika ili pozvanog kojeg deli vlasnik.


Ako su zastavice za automatsko deljenje i ručno deljenje obe OFF, LstRecording vraća korisnika samo kao vlasnika snimaka.

Kada returnShareToMeRecording je podešeno na False ili ovaj element nije uključen u zahtev, LstRecording sledi istu logiku kao i pre: vraća korisnika snimka kao vlasnika.

Api-je koji utiču na to:

  • LstRecording

    • returnShareToMeRecording

LstRecording Ispravke:

Element shareToMe dodato u LstRecording API odgovor


Ova promena je prethodno najavljena u XML API 11.0 SP17, ali se primenjuje na ovu ispravku.

Novi element, shareToMe, je dodato u LstRecording API. shareToMe je Boolean u odgovoru za LstRecording.

Ovaj novi element je dodat da bi se podržalo pronalaženje snimaka učesnika ili učesnika. shareToMe je zastavica za definisanje da li je korisnik vlasnik ili učesnik trenutnog snimanja.

Kada shareToMe Je True korisnik nije vlasnik trenutnog snimanja. Korisnik može biti učesnik ili ga vlasnik deli.

Kada shareToMe Je False, ili ovaj element nije u odgovoru, LstRecording sledi istu logiku kao i pre: korisnik je vlasnik trenutnog snimka.

Api-je koji utiču na to:

  • LstRecording

    • shareToMe

LstRecording Ispravke:

returnShareToMeRecording i shareToMe Primeri zahteva:

<bodyContent xsi:type=”java.com.webex.service.binding..ep.LstRecording”>
<hostWebExID>auto243</hostWebExID>
<createTimeScope>
<createTimeStart>08/15/2018 8:0:0</createTimeStart>
<createTimeEnd>09/05/2018 7:59:59</createTimeEnd>
<timeZoneID>20</timeZoneID>
</createTimeScope>
<serviceTypes>
<serviceType>MeetingCenter</serviceType>
<serviceType>EventCenter</serviceType>
<serviceType>TrainingCenter</serviceType>
</serviceTypes>
<returnShareToMeRecording>true</returnShareToMeRecording>
</bodyContent>

returnShareToMeRecording i shareToMe Primeri odgovora:

Dodati novi elementi GetEvent API

Četiri nova elementa su dodata u GetEvent API:

  • isCETMeeting: a Boolean True/False koji pokazuje da li Webex događaj podržava Webex Video platformu 2 (CMR 4.0)

  • sipURL: URL adresa koja se koristi za pridruživanje Webex Video sastanku iz sistema ili aplikacije za video konferencije

  • standaloneDialingIPAddress: IP adresa koja se može koristiti za pozivanje Webex Video sastanka iz sistema ili aplikacije za video konferencije

  • panelistNumericPassword: lozinka za pridruživanje Webex Video sastanku iz sistema ili aplikacije za video konferencije

Ako lokacija podržava Webex Video, domaćin ima privilegije video zapisa Webex Events, a događaj podržava Webex Video platformu 2 (CMR 4.0), GetEvent daje ove elemente. Inaиe GetEvent ne vraжa ih.

Api-je koji utiču na to:

  • GetEvent

    • isCETMeeting

    • sipURL

    • standaloneDialingIPAddress

    • panelistNumericPassword

Novi element panelistNumericPassword dodato u GetSessionInfo API

GetSessionInfo ima novi element, panelistNumericPassword, koji sadrži lozinku za pridruživanje Webex Video sastanku iz sistema ili aplikacije za video konferencije.

Ako lokacija podržava Webex Video, domaćin ima privilegije video zapisa Webex Events, a događaj podržava Webex Video platformu 2 (CMR 4.0), GetSessionInfo daje ova četiri elementa:

  • isCETMeeting: a Boolean True/False koji pokazuje da li Webex događaj podržava Webex Video platformu 2 (CMR 4.0)

  • sipURL: URL adresa koja se koristi za pridruživanje Webex Video sastanku iz sistema ili aplikacije za video konferencije

  • standaloneDialingIPAddress: IP adresa koja se može koristiti za pozivanje Webex Video sastanka iz sistema ili aplikacije za video konferencije

  • panelistNumericPassword: lozinka za pridruživanje Webex Video sastanku iz sistema ili aplikacije za video konferencije


Za Webex sastanke, ovi elementi su već postojali u GetSessionInfo:

  • isCETMeeting

  • sipURL

  • standaloneDialingIPAddress

Api-je koji utiču na to:

  • GetSessionInfo

    • panelistNumericPassword

Promene šeme napravljene u GetEvent i GetSessionInfo

GetEvent Ispravke:

GetSessionInfo Ispravke:

Ispravke za XML API 11.0.0 SP18

Kliknite ovde da biste preuzeli XML API 11.0 SP18 šemu.

Novi element EnableCloudTelepresence dodato u getSite API

Novi element, EnableCloudTelepresence je dodato u getSite API.

Kada opcija EnableCETForAllUsers je omogućen, Webex proverava da li korisnik podržava Webex video (CMR). Sada takođe vraća novi element EnableCloudTelepresence U getSite API.

Api-je koji utiču na to:

  • getSite

  • EnableCloudTelepresence

getSite Primer odgovora:

Ispravke za XML API 11.0.0 SP17

Novi element returnShareToMeRecording dodato u LstRecording API zahtev

Novi element, returnShareToMeRecording, je dodato u LstRecording API. returnShareToMeRecording je Boolean u zahtevu za LstRecording.

Ovaj novi element je dodat da bi se podržalo povlačenje snimaka učesnika ili učesnika. returnShareToMeRecording je zastava da se pusti LstRecording API zna da mora da vrati snimke učesnika ili učesnika.

Kada returnShareToMeRecording je podešeno na True, LstRecording vraća korisnika snimka kao vlasnika, a takođe vraća korisnika snimka kao učesnika ili pozvanog kojeg deli vlasnik.


Ako su zastavice za automatsko deljenje i ručno deljenje onemogućene, LstRecording vraća samo korisnika kao vlasnika snimaka.

Kada returnShareToMeRecording je podešeno na False ili ovaj element nije uključen u zahtev, LstRecording sledi istu logiku kao i pre: vraća korisnika snimka kao vlasnika.

Api-je koji utiču na to:

  • LstRecording

  • returnShareToMeRecording

LstRecording Ispravke:

Novi element shareToMe dodato u LstRecording API odgovor

Novi element, shareToMe, je dodato u LstRecording API. shareToMe je Boolean u odgovoru za LstRecording.

Ovaj novi element je dodat da bi se podržalo povlačenje snimaka učesnika ili učesnika. shareToMe je zastavica za definisanje da li je korisnik vlasnik ili učesnik ili pozvan za trenutno snimanje.

Kada shareToMe Je True korisnik nije vlasnik trenutnog snimka. Korisnik može biti učesnik ili učesnik ili snimak koji vlasnik deli.

Kada shareToMe Je False, ili ovaj element nije u odgovoru, LstRecording sledi istu logiku kao i pre: korisnik je vlasnik trenutnog snimka.

Pogođeni API- i:

  • LstRecording

  • shareToMe

LstRecording Ispravke:

Novi elementi za kapacitet učesnika dodati API-u getSite Odgovor

Četiri nova elementa su dodata u getSite API da biste ukazali na kapacitet učesnika za sledeće Webex usluge:

attendeeCapacityForMC- Webex Meetings

attendeeCapacityForEC – Webex Events

attendeeCapacityForTC – Webex Training

attendeeCapacityForSC – Webex Support

Ove vraćene vrednosti ukazuju na maksimalan broj učesnika koje sastanak, događaj ili sesija mogu imati. Oni su deca CISiteLicenseInfo element u odgovoru.

Api-je koji utiču na to:

  • getSite

  • attendeeCapacityForMC

  • attendeeCapacityForEC

  • attendeeCapacityForTC

  • attendeeCapacityForSC

getSite Primer odgovora:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ns1="http://www.webex.com/schemas/2002/06/service/site" xmlns:event="http://www.webex.com/schemas/2002/06/service/event">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:getSiteResponse">
            <ns1:siteInstance>
...
...
                <ns1:CISiteLicenseInfo>
                    <ns1:accountNumberLimitForMC>999</ns1:accountNumberLimitForMC>
                    <ns1:allowOverageForMC>false</ns1:allowOverageForMC>
                    <ns1:accountNumberUsedForMC>43</ns1:accountNumberUsedForMC>
                    <ns1:accountNumberLimitForTC>999</ns1:accountNumberLimitForTC>
                    <ns1:allowOverageForTC>false</ns1:allowOverageForTC>
                    <ns1:accountNumberUsedForTC>44</ns1:accountNumberUsedForTC>
                    <ns1:accountNumberLimitForEC>999</ns1:accountNumberLimitForEC>
                    <ns1:allowOverageForEC>false</ns1:allowOverageForEC>
                    <ns1:accountNumberUsedForEC>22</ns1:accountNumberUsedForEC>
                    <ns1:accountNumberLimitForSC>999999</ns1:accountNumberLimitForSC>
                    <ns1:allowOverageForSC>false</ns1:allowOverageForSC>
                    <ns1:accountNumberUsedForSC>13</ns1:accountNumberUsedForSC>
                    <ns1:accountNumberLimitForCMRHost>999999</ns1:accountNumberLimitForCMRHost>
                    <ns1:allowOverageForCMRHost>false</ns1:allowOverageForCMRHost>
                    <ns1:accountNumberUsedForCMRHost>4</ns1:accountNumberUsedForCMRHost>
                    <ns1:attendeeCapacityForMC>1000</ns1:attendeeCapacityForMC>
                    <ns1:attendeeCapacityForTC>1000</ns1:attendeeCapacityForTC>
                    <ns1:attendeeCapacityForEC>3000</ns1:attendeeCapacityForEC>
                    <ns1:attendeeCapacityForSC>500</ns1:attendeeCapacityForSC>
                </ns1:CISiteLicenseInfo>
            </ns1:siteInstance>
        </serv:bodyContent>
    </serv:body>
</serv:message>

Ispravke za XML API 11.0.0 SP16

Novi API hostStreamURL dodato u lstRecordingResponse

Element hostStreamURL je dodato u LstRecording odgovor kao deo detalja snimanja. hostStreamURL daje URL adresu koju domaćin treba da koristi za prikazivanje snimka bez prethodnog prijavljivanja. Ova URL adresa važi 30 minuta nakon generisanja.

Api-je koji utiču na to:

  • hostStreamURL

hostStreamURL Primer odgovora:

<xsd:complexType name="recordingType">
<xsd:sequence>
<xsd:element name="recordingID" type="xsd:int"/>
<xsd:element name="hostWebExID" type="xsd:string"/>
<xsd:element name="name" type="xsd:string"/>
<xsd:element name="description" type="xsd:string"/>
<xsd:element name="createTime" type="xsd:string"/>
<xsd:element name="timeZoneID" type="xsd:int"/>
<xsd:element name="size" type="xsd:float"/>
<xsd:element name="streamURL" type="xsd:string"/>
<xsd:element name="hostStreamURL" type="xsd:string" minOccurs="0"/>
<xsd:element name="fileURL" type="xsd:string"/>

GetSite API koristi novo WebDB modelovanje za vraćanje podataka

Po zahtevu kupca, API GetSite sada preuzima precizniju licencu domaćina, podatke o izveštavanju o korišćenju i druge podatke koristeći novi WebDB modeling za CI lokacije.

Api-je koji utiču na to:

  • GetSite

GetSite Primer odgovora:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ns1="http://www.webex.com/schemas/2002/06/service/site" xmlns:event="http://www.webex.com/schemas/2002/06/service/event">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:getSiteResponse">
            <ns1:siteInstance>
...
...
                <ns1:CISiteLicenseInfo>
                    <ns1:accountNumberLimitForMC>999</ns1:accountNumberLimitForMC>
                    <ns1:allowOverageForMC>false</ns1:allowOverageForMC>
                    <ns1:accountNumberUsedForMC>43</ns1:accountNumberUsedForMC>
                    <ns1:accountNumberLimitForTC>999</ns1:accountNumberLimitForTC>
                    <ns1:allowOverageForTC>false</ns1:allowOverageForTC>
                    <ns1:accountNumberUsedForTC>44</ns1:accountNumberUsedForTC>
                    <ns1:accountNumberLimitForEC>999</ns1:accountNumberLimitForEC>
                    <ns1:allowOverageForEC>false</ns1:allowOverageForEC>
                    <ns1:accountNumberUsedForEC>22</ns1:accountNumberUsedForEC>
                    <ns1:accountNumberLimitForSC>999999</ns1:accountNumberLimitForSC>
                    <ns1:allowOverageForSC>false</ns1:allowOverageForSC>
                    <ns1:accountNumberUsedForSC>13</ns1:accountNumberUsedForSC>
                    <ns1:accountNumberLimitForCMRHost>999999</ns1:accountNumberLimitForCMRHost>
                    <ns1:allowOverageForCMRHost>false</ns1:allowOverageForCMRHost>
                    <ns1:accountNumberUsedForCMRHost>4</ns1:accountNumberUsedForCMRHost>
                </ns1:CISiteLicenseInfo>
            </ns1:siteInstance>
        </serv:bodyContent>
    </serv:body>
</serv:message>

GetSite Primer odgovora za EE lokacije:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ns1="http://www.webex.com/schemas/2002/06/service/site" xmlns:event="http://www.webex.com/schemas/2002/06/service/event">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:getSiteResponse">
            <ns1:siteInstance>
...
...
                <ns1:CISiteLicenseInfo>
                    <ns1:accountNumberLimitForCMRHost>80</ns1:accountNumberLimitForCMRHost>
                    <ns1:allowOverageForCMRHost>true</ns1:allowOverageForCMRHost>
                    <ns1:accountNumberUsedForCMRHost>99</ns1:accountNumberUsedForCMRHost>
                    <ns1:accountNumberLimitForEEHost>999999</ns1:accountNumberLimitForEEHost>
                    <ns1:allowOverageForEEHost>false</ns1:allowOverageForEEHost>
                    <ns1:accountNumberUsedForEEHost>368</ns1:accountNumberUsedForEEHost>
                </ns1:CISiteLicenseInfo>
            </ns1:siteInstance>
        </serv:bodyContent>
    </serv:body>
</serv:message>

Ispravke za XML API 11.0.0 SP15

Povratna veza sastanka Webex sastanaka pomoću ApI-ja GetSessionsInfo

Šema za GetSessionInfo API ima novu povratnu vrednost, meetingLink. Vezu za sastanak možete da koristite za započinjanje Webex sastanka kao domaćina ili pridruživanje Webex sastanku kao učesnika.

Api-je koji utiču na to:

  • GetSessionInfo

  • meetingLink

GetSessionInfo Primer odgovora:

    <ep:meetingLink>https://hmwds6.qa.webex.com/hmwds6/j.php?MTID=m265e64705c6660d4132c2d4f19aed7e7</ep:meetingLink>
</serv:bodyContent>

Novi uslov za upite po RecordingID dana LstRecording API

Sada možeš da koristiš LstRecording da biste izvršavali upit nad snimcima pomoću recordingID. Postoje dve vrste ID-ova za snimanje:

  • ID-ovi za snimanje Webex sastanaka, Webex događaja i Webex obuke

  • NBR ID-ove snimanja za dodatne pogodnosti

Ako postoji serviceType element u XML zahtevu, zatim LstRecording vraća samo servisno snimanje (Webex sastanci, Webex događaji i Webex Obuka).

Ako ne postoji serviceType element u XML zahtevu, zatim LstRecording daje samo NBR snimanje.

Api-je koji utiču na to:

  • LstRecording

  • RecordingID

LstRecording Primeri odgovora:

Primer zahteva za ID snimanja usluge:

<bodyContent xsi:type="java:com.webex.service.binding.ep.LstRecording">
    <serviceTypes>
        <serviceType>MeetingCenter</serviceType>
        <serviceType>EventCenter</serviceType>
        <serviceType>TrainingCenter</serviceType>
    </serviceTypes>
    <recordingID>974164492</recordingID>
    <order>
         <orderBy>CREATETIME</orderBy>
         <orderAD>DESC</orderAD>
         <orderBy>HOSTID</orderBy>
         <orderAD>ASC</orderAD>
         <orderBy>RECORDNAME</orderBy>
         <orderAD>ASC</orderAD>
    </order>
</bodyContent>

Primer zahteva za ID NBR snimanja:

<bodyContent xsi:type="java:com.webex.service.binding.ep.LstRecording">
    <recordingID>974154032</recordingID>
    <order>
         <orderBy>CREATETIME</orderBy>
         <orderAD>DESC</orderAD>
         <orderBy>HOSTID</orderBy>
         <orderAD>ASC</orderAD>
         <orderBy>RECORDNAME</orderBy>
         <orderAD>ASC</orderAD>
    </order>
</bodyContent>

Ispravke za XML API 11.0.0 SP14

Preliminarni izveštaji sažetka upotrebe za centar za sastanke

Dodata su dva nova API-ja za preliminarne izveštaje Centra za sastanke, LstmeetingusagePreliminaryHistory i LstmeetingattendeePreliminaryHistory. Oni će imati isto ponašanje kao i LsteventsessionPreliminaryHistory i LsteventattendeePreliminaryHistory u konačnom izveštaju.

Api-je koji utiču na to:

  • LstmeetingusagePreliminaryHistory

  • LstmeetingattendeePreliminaryHistory

LstmeetingusagePreliminaryHistory Primer zahteva:

<?xml version="1.0" encoding="UTF-8"?>
<serv:message
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:serv="http://www.webex.com/schemas/2002/06/service"
   xsi:schemaLocation="http://www.webex.com/schemas/2002/06/service
   http://www.webex.com/schemas/2002/06/service/service.xsd">
    <header>
        <securityContext>
            <webExID>testuser</webExID>
            <password>****</password>
            <siteName>testsite</siteName>
        </securityContext>
    </header>
    <body>
        <bodyContent xsi:type="java:com.webex.service.binding.history.LstmeetingusagePreliminaryHistory">
            <startTimeScope>
                <sessionStartTimeStart>4/23/2018 00:00:00</sessionStartTimeStart>
                <sessionStartTimeEnd>4/24/2018 11:59:59</sessionStartTimeEnd>
            </startTimeScope>
            <listControl>
                <startFrom>1</startFrom>
                <maximumNum>10</maximumNum>
                <listMethod>AND</listMethod>
            </listControl>
            <order>
                <orderBy>STARTTIME</orderBy>
                <orderAD>ASC</orderAD>
                <orderBy>CONFNAME</orderBy>
                <orderAD>ASC</orderAD>
                <orderBy>CONFID</orderBy>
                <orderAD>ASC</orderAD>
            </order>
        </bodyContent>
    </body>
</serv:message>

LstmeetingusagePreliminaryHistory Primer odgovora:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:history="http://www.webex.com/schemas/2002/06/service/history">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="history:lstmeetingusagePreliminaryHistoryResponse">
            <history:meetingUsagePreliminaryHistory>
                <history:confID>93115261364733685</history:confID>
                <history:sessionKey>800150023</history:sessionKey>
                <history:confName>200804231215</history:confName>
                <history:openTime>04/23/2018 19:16:34</history:openTime>
                <history:timeZoneID>4</history:timeZoneID>
                <history:meetingType>PRO</history:meetingType>
                <history:timeZoneWithDST>San Francisco (Pacific Daylight Time, GMT-07:00)</history:timeZoneWithDST>
                <history:trackingCode>
                    <com:trackingCode1>mytrackingcode1</com:trackingCode1>
                    <com:trackingCode2>mytrackingcode2</com:trackingCode2>
                </history:trackingCode>
                <history:registered>1</history:registered>
                <history:invited>1</history:invited>
                <history:attended>3</history:attended>
            </history:meetingUsagePreliminaryHistory>
            <history:matchingRecords>
                <serv:total>1</serv:total>
                <serv:returned>1</serv:returned>
                <serv:startFrom>1</serv:startFrom>
            </history:matchingRecords>
        </serv:bodyContent>
    </serv:body>
</serv:message>

LstmeetingattendeePreliminaryHistory Primer zahteva:

<?xml version="1.0" encoding="UTF-8"?>
<serv:message
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:serv="http://www.webex.com/schemas/2002/06/service"
   xsi:schemaLocation="http://www.webex.com/schemas/2002/06/service
   http://www.webex.com/schemas/2002/06/service/service.xsd">
    <header>
        <securityContext>
            <webExID>testuser</webExID>
            <password>****</password>
            <siteName>testsite</siteName>
        </securityContext>
    </header>
    <body>
        <bodyContent xsi:type="java:com.webex.service.binding.history.LstmeetingattendeePreliminaryHistory">
            <startTimeScope>
                <sessionStartTimeStart>4/23/2018 00:00:00</sessionStartTimeStart>
                <sessionStartTimeEnd>4/24/2018 11:59:59</sessionStartTimeEnd>
            </startTimeScope>
            <listControl>
                <startFrom>1</startFrom>
                <maximumNum>10</maximumNum>
                <listMethod>AND</listMethod>
            </listControl>
            <order>
                <orderBy>STARTTIME</orderBy>
                <orderAD>ASC</orderAD>
                <orderBy>CONFID</orderBy>
                <orderAD>ASC</orderAD>
            </order>
        </bodyContent>
    </body>
</serv:message>

LstmeetingattendeePreliminaryHistory Primer odgovora:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:history="http://www.webex.com/schemas/2002/06/service/history">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="history:lstmeetingattendeePreliminaryHistoryResponse">
            <history:meetingAttendeePreliminaryHistory>
                <history:meetingKey>800150023</history:meetingKey>
                <history:confName>200804231215</history:confName>
                <history:company>XYZ</history:company>
                <history:title>DJ</history:title>
                <history:phoneNumber>1,222,654-3210,,,,</history:phoneNumber>
                <history:address1>1 Any Street</history:address1>
                <history:address2>xyz</history:address2>
                <history:city>SanJose</history:city>
                <history:state>CA</history:state>
                <history:country>USA</history:country>
                <history:zipCode>95111</history:zipCode>
                <history:name>user test2</history:name>
                <history:email>ut2@qa.webex.com</history:email>
                <history:joinTime>04/23/2018 19:13:06</history:joinTime>
                <history:participantType>ATTENDEE</history:participantType>
                <history:confID>93115261364733685</history:confID>
            </history:meetingAttendeePreliminaryHistory>
            <history:meetingAttendeePreliminaryHistory>
                <history:meetingKey>800150023</history:meetingKey>
                <history:confName>200804231215</history:confName>
                <history:name>zzz zzzz</history:name>
                <history:email>z6@webex.com</history:email>
                <history:joinTime>04/23/2018 19:14:10</history:joinTime>
                <history:participantType>ATTENDEE</history:participantType>
                <history:confID>93115261364733685</history:confID>
            </history:meetingAttendeePreliminaryHistory>
            <history:meetingAttendeePreliminaryHistory>
                <history:meetingKey>800150023</history:meetingKey>
                <history:confName>200804231215</history:confName>
                <history:name>test host</history:name>
                <history:email>testuser@webex.com</history:email>
                <history:joinTime>04/23/2018 19:12:42</history:joinTime>
                <history:participantType>ATTENDEE</history:participantType>
                <history:confID>93115261364733685</history:confID>
            </history:meetingAttendeePreliminaryHistory>
            <history:matchingRecords>
                <serv:total>3</serv:total>
                <serv:returned>3</serv:returned>
                <serv:startFrom>1</serv:startFrom>
            </history:matchingRecords>
        </serv:bodyContent>
    </serv:body>
</serv:message>

Vraćanje SIP URL adrese i Skype URL adrese sa GLA GetsessionInfo API

Dva nova elementa, <sipURL> i <skypeURL>, bili su pridodati odgovoru prilikom pozivanja GLA GetSessionInfo API. Ovi elementi su osnovni elementi koji se mogu vratiti za anonimni pristup.

  • <sipURL> može se koristiti za pridruživanje sastancima sa TelePresence ili drugog Cisco video uređaja. Na ovaj način, samo sastanci koji koriste Cisco video platformu verzije 1.0 ili 2.0 treba da dobiju GetSessionInfo da vrate <sipURL> Element.

  • <skypeURL> može da se koristi za pridruživanje sastancima iz Microsoft Skype aplikacije, bez ikakvih ograničenja i uslova, tako da može da se vrati za svaki poziv.

Api-je koji utiču na to:

  • GetSessionInfo

Primer odgovora:

Povratna SIP URL adresa i veza za sastanak iz GetMeeting API

Tri nova elementa, <isCETMeeting>, <meetingLink> I <sipURL>, bili su pridodati odgovoru prilikom pozivanja GetMeeting API.

  • <isCETMeeting> daje da li sastanak koristi Cisco video platformu (podržava TelePresence i video zapise).

  • <meetingLink> može da se koristi za povezivanje sa sastancima.

  • <sipURL> može se koristiti za pridruživanje sastancima sa TelePresence ili drugog Cisco video uređaja. Na ovaj način bi trebalo da se održavaju samo sastanci pomoću Cisco video platformi verzije 1.0 ili 2.0 GetMeeting vratite element.

Api-je koji utiču na to:

  • GetMeeting

GetMeeting Primer odgovora:

Ispravke za XML API 11.0.0 SP13

Najava amortizacije <siteID> elementa kod roditelja <securityContext>

Cisco planira da amortira <siteID> element u nadređenom objektu <securityContext> element, i zamenite ga sa <siteName>. Zbog velikog broja <siteID> elementi koji se često menjaju tokom migracija lokacije, organizacije snose velike troškove održavanja da bi išle korišćenjem ovog elementa. Ovo je obaveštenje o avansu od dve godine.

  • Za postojeće WebEx korisnike uticaj će se dogoditi 1. maja 2020. godine.

  • Novi kupci moraju da koriste <siteName> element koji počinje 1. maja 2018.

  • Klijenti koji rade integraciju sa CI, Spark ili Atlas sistemom moraju da koriste <siteName> element koji počinje 1. maja 2018.

Api-je koji utiču na to:

  • <siteName>

  • <securityContext>

Provera valjanosti podataka <tollCallInData> i <tollFreeCallInData> Elemente

Počevši od 1. juna 2018. godine, oba <tollCallInData> i <tollFreeCallInData> API-je će biti provereni podaci. Ovo utiče na <CreateUser> i <SetUser> Apis.

Lokacije koje koriste niske koje nisu važeće ili nepravilno oblikovane niske u pozivu u podacima moraju da isprave niske da bi ovi elementi prosledili proveru valjanosti podataka.

U nastavku su navedeni primeri CreateUser i SetUser, tollCallInData i tollFreeCallInData u ispravnom formatu:

<tspAccount>
    <tspAccount>
        <tollFreeCallInNumber>86,123,4567000</tollFreeCallInNumber>
        <tollFreeCallInData>1,86</tollFreeCallInData>
        <accountIndex>1</accountIndex>
        <tollCallInNumber>86,123,4567890</tollCallInNumber>
        <tollCallInData>0,86</tollCallInData>
        <subscriberAccessCode>12341234</subscriberAccessCode>
        <participantAccessCode>12341234</participantAccessCode>
        <createOnBridge>false</createOnBridge>
        <defaultFlag>false</defaultFlag>
    </tspAccount>
</tspAccount>
...

Ispravke za XML API 11.0.0 SP12

Dva nova API-ja SetContact i DelContacts

XML API šema je ranije imala samo dva API-ja CreateContacts i LstContacts, koji nije obezbedio kompletno upravljanje korisničkim kontaktima. Da bismo obezbedili bolju funkcionalnost za upravljanje korisničkim kontaktom pomoću XML API-ja, dodali smo ova dva nova API-ja, SetContact i DelContacts.

API

Napomene

SetContact

Pozovite ovaj API da biste izmenili kontakt informacije kao što su e-pošta, ime, naslov i jezik.

Izuzetaka:

  • Ako kontakt nije pronađen od strane contactEmail element, izuzetak 140004 "Kontakt nije pronađen"

  • Ako Webex lokacija ne podržava dati jezik, vraća se izuzetak 030060 "Nije važeći jezik"

  • Ako je nova e-adresa koju korisnik želi da promeni duplikat sa drugim kontaktom na listi mojih kontakata, vraća se izuzetak 140001 "E-poruku koristi drugi kontakt"

DelContacts

Pozovite ovaj API da biste izbrisali jedan ili više kontakata sa liste "Moji kontakti" na osnovu datih e-poruka.

contactID se vraća ako se data e-pošta može pronaći sa liste "Moji kontakti" i zanemaruje datu e-poruku ako se ne nalazi na listi "Moji kontakti".

Ako sve date e-poruke nisu pronađene na listi mojih kontakata, vraća se izuzetak 00015 (Žao nam je, nije pronađen nijedan zapis).

Api-je koji utiču na to:

  • SetContact

  • DelContacts

SetContact Primer zahteva:

<?xml version="1.0" encoding="ISO-8859-1"?>
<serv:message  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:serv="http://www.webex.com/schemas/2002/06/service">
<header>
    <securityContext>
      <siteName>SiteName</siteName>
      <webExID>UserID</webExID>
       <password>UserPWD</password>
    </securityContext>
</header>
<body>
<bodyContent xsi:type="java:com.webex.service.binding.ep.SetContact">
            <contactEmail>Contact Email adress</contactEmail>
           <contact>
                <name>New Contact Name</name>
                <email>New Contact Email Address</email>
                <title>New Title</title>
                <company>New Company</company>
                <notes>New Notes</notes>
                <url>New Link</url>
                <phones>
                    <phone>1,,408######,,,,</phone>
                    <mobilePhone>1,,408######,,,,</mobilePhone>
                    <fax>1,,408######,,,,</fax>
                </phones>
                <address>
                    <address1>New Address 1</address1>
                    <address2>New Address 2</address2>
                    <city>New City</city>
                    <state>New State</state>
                    <zipCode>New ZipCode</zipCode>
                    <country>New Company</country>
                </address>
                <language>New Language</language>
            </contact>
</bodyContent>
</body>
</serv:message>

SetContact Primer odgovora:

<?xml version="1.0" encoding="ISO-8859-1"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ep="http://www.webex.com/schemas/2002/06/service/ep" xmlns:meet="http://www.webex.com/schemas/2002/06/service/meeting">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xsi:type="ep:setContactResponse" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"/>
    </serv:body>
</serv:message>

DelContacts Primer zahteva:

<?xml version="1.0" encoding="ISO-8859-1"?>
<serv:message  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:serv="http://www.webex.com/schemas/2002/06/service">
<header>
    <securityContext>
      <siteName>SiteName</siteName>
      <webExID>UserID</webExID>
       <password>UserPWD</password>
    </securityContext>
</header>
<body>
<bodyContent xsi:type="java:com.webex.service.binding.ep.DelContacts">
        <contactEmail>contact1@qa.webex.com</contactEmail>
        <contactEmail>contact2@qa.webex.com</contactEmail>
</bodyContent>
</body>
</serv:message>

DelContacts Primeri odgovora:


U ovom primeru, dva postojeća kontakta se brišu sa liste "Moji kontakti".

<?xml version="1.0" encoding="ISO-8859-1"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ep="http://www.webex.com/schemas/2002/06/service/ep" xmlns:meet="http://www.webex.com/schemas/2002/06/service/meeting">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xsi:type="ep:delContactsResponse" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ep:contactID>31830997</ep:contactID>
            <ep:contactID>31831002</ep:contactID>
        </serv:bodyContent>
    </serv:body>
</serv:message>

U ovom primeru, e-poruke se ne sjedište za fasciklu "Moji kontakti".

<?xml version="1.0" encoding="ISO-8859-1"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:ep="http://www.webex.com/schemas/2002/06/service/ep" xmlns:meet="http://www.webex.com/schemas/2002/06/service/meeting">
    <serv:header>
        <serv:response>
            <serv:result>FAILURE</serv:result>
            <serv:reason>Sorry, no record found</serv:reason>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
            <serv:exceptionID>000015</serv:exceptionID>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent/>
    </serv:body>
</serv:message>

Ispravke za XML API 11.0.0 SP11

Novi API LstTrainingPollResultsHistory

The LstTrainingPollResultsHistory API je prvobitno primenjen u URL API- u. Po zahtevu korisnika, sada je implementiran u XML API.

Rezultati ankete liste se vraćaju unosom Centra za obuku sessionKey. API može da zatraži vlasnik sesije Centra za obuku ili administrator lokacije.


Postavka poboljšanog TC anketiranja mora biti omogućena pre nego što se rezultati ankete obuke uskladište u WebEx DB:

Api-je koji utiču na to:

  • LstTrainingPollResultsHistory

LstTrainingPollResultHistory Primer zahteva:

<?xml version="1.0" encoding="UTF-8"?>
<serv:message
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:serv="http://www.webex.com/schemas/2002/06/service"
   xsi:schemaLocation="http://www.webex.com/schemas/2002/06/service
   http://www.webex.com/schemas/2002/06/service/service.xsd">
    <header>
        <securityContext>
            <!-- <returnAdditionalInfo>true</returnAdditionalInfo> -->
            <webExID>ut2</webExID>
            <password>xxxxxxx</password>
            <siteName>testsite1</siteName>
        </securityContext>
    </header>
    <body>
        <bodyContent
xsi:type="java:com.webex.service.binding.history.LstTrainingPollResultsHistory"
            xmlns:meet="http://www.webex.com/schemas/2002/06/service/history">
            <listControl>
                <startFrom>1</startFrom>
                <maximumNum>10</maximumNum>
            </listControl>
            <confID>81722715648558691</confID>
        </bodyContent>
    </body>
</serv:message>

Zahtev je samo za T32/XML API 11.0.0.

LstTrainingPollResultHistory Primer odgovora:

<?xml version="1.0" encoding="UTF-8"?>
<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:history="http://www.webex.com/schemas/2002/06/service/history">
    <serv:header>
        <serv:response>
            <serv:result>SUCCESS</serv:result>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent xsi:type="history:lstTrainingPollResultsHistoryResponse" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <history:matchingRecords>
                <serv:total>2</serv:total>
                <serv:returned>2</serv:returned>
                <serv:startFrom>1</serv:startFrom>
            </history:matchingRecords>
            <history:sessionInfo>
                <history:sessionKey>81901776767288734</history:sessionKey>
                <history:confName>TC poll test 20171220 1635</history:confName>
                <history:host>John Doe</history:host>
            </history:sessionInfo>
            <history:polls>
                <history:poll>
                    <history:pollDesc>Test</history:pollDesc>
                    <history:timeLimit>300</history:timeLimit>
                    <history:startTime>12/20/2017 16:54:48</history:startTime>
                    <history:endTime>12/20/2017 16:58:07</history:endTime>
                    <history:numAttendees>3</history:numAttendees>
                    <history:questions>
                        <history:question>
                            <history:questionSequence>1</history:questionSequence>
                            <history:questionDesc>test question 1 (multi-choice/single-answer)</history:questionDesc>
                            <history:questionType>1</history:questionType>
                            <history:answerChoices>
                                <history:answerChoice>test answer 4</history:answerChoice>
                                <history:answerChoice>test answer 3</history:answerChoice>
                                <history:answerChoice correct="true">test answer 2</history:answerChoice>
                                <history:answerChoice>test answer 1</history:answerChoice>
                            </history:answerChoices>
                            <history:attendees>
                                <history:attendee>
                                    <history:username>2128465742</history:username>
                                    <history:fullName>test</history:fullName>
                                    <history:email>test@qa.webex.com</history:email>
                                    <history:pollResponse>test answer 2</history:pollResponse>
                                    <history:isCorrect>true</history:isCorrect>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465747</history:username>
                                    <history:fullName>test2</history:fullName>
                                    <history:email>test2@qa.webex.com</history:email>
                                    <history:pollResponse>test answer 1</history:pollResponse>
                                    <history:isCorrect>false</history:isCorrect>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465752</history:username>
                                    <history:fullName>test3</history:fullName>
                                    <history:email>test3@qa.webex.com</history:email>
                                    <history:pollResponse>No Answer</history:pollResponse>
                                    <history:isCorrect>false</history:isCorrect>
                                </history:attendee>
                            </history:attendees>
                        </history:question>
                        <history:question>
                            <history:questionSequence>2</history:questionSequence>
                            <history:questionDesc>test question 2 (multi-choiec.multi-answer)</history:questionDesc>
                            <history:questionType>2</history:questionType>
                            <history:answerChoices>
                                <history:answerChoice>test answer D</history:answerChoice>
                                <history:answerChoice>test answer C</history:answerChoice>
                                <history:answerChoice correct="true">test answer B</history:answerChoice>
                                <history:answerChoice correct="true">test answer A</history:answerChoice>
                            </history:answerChoices>
                            <history:attendees>
                                <history:attendee>
                                    <history:username>2128465742</history:username>
                                    <history:fullName>test</history:fullName>
                                    <history:email>test@qa.webex.com</history:email>
                                    <history:pollResponse>test answer B,test answer A</history:pollResponse>
                                    <history:isCorrect>true</history:isCorrect>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465747</history:username>
                                    <history:fullName>test2</history:fullName>
                                    <history:email>test2@qa.webex.com</history:email>
                                    <history:pollResponse>test answer D,test answer C,test answer B,test answer A</history:pollResponse>
                                    <history:isCorrect>false</history:isCorrect>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465752</history:username>
                                    <history:fullName>test3</history:fullName>
                                    <history:email>test3@qa.webex.com</history:email>
                                    <history:pollResponse>No Answer</history:pollResponse>
                                    <history:isCorrect>false</history:isCorrect>
                                </history:attendee>
                            </history:attendees>
                        </history:question>
                        <history:question>
                            <history:questionSequence>3</history:questionSequence>
                            <history:questionDesc>test question 2 (short answer)</history:questionDesc>
                            <history:questionType>3</history:questionType>
                            <history:attendees>
                                <history:attendee>
                                    <history:username>2128465742</history:username>
                                    <history:fullName>test</history:fullName>
                                    <history:email>test@qa.webex.com</history:email>
                                    <history:pollResponse>ans1</history:pollResponse>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465747</history:username>
                                    <history:fullName>test2</history:fullName>
                                    <history:email>test2@qa.webex.com</history:email>
                                    <history:pollResponse>ans2</history:pollResponse>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465752</history:username>
                                    <history:fullName>test3</history:fullName>
                                    <history:email>test3@qa.webex.com</history:email>
                                    <history:pollResponse>No Answer</history:pollResponse>
                                </history:attendee>
                            </history:attendees>
                        </history:question>
                    </history:questions>
                </history:poll>
                <history:poll>
                    <history:pollDesc>Survey</history:pollDesc>
                    <history:timeLimit>300</history:timeLimit>
                    <history:startTime>12/20/2017 16:58:57</history:startTime>
                    <history:endTime>12/20/2017 17:02:39</history:endTime>
                    <history:numAttendees>3</history:numAttendees>
                    <history:questions>
                        <history:question>
                            <history:questionSequence>1</history:questionSequence>
                            <history:questionDesc>survey question 1 (multi-choiec/sinngle-answer)</history:questionDesc>
                            <history:questionType>1</history:questionType>
                            <history:answerChoices>
                                <history:answerChoice>survey answer 3</history:answerChoice>
                                <history:answerChoice>survey answer 2</history:answerChoice>
                                <history:answerChoice>survey answer 1</history:answerChoice>
                            </history:answerChoices>
                            <history:attendees>
                                <history:attendee>
                                    <history:username>2128465757</history:username>
                                    <history:fullName>test</history:fullName>
                                    <history:email>test@qa.webex.com</history:email>
                                    <history:pollResponse>survey answer 3</history:pollResponse>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465762</history:username>
                                    <history:fullName>test2</history:fullName>
                                    <history:email>test2@qa.webex.com</history:email>
                                    <history:pollResponse>survey answer 2</history:pollResponse>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465767</history:username>
                                    <history:fullName>test3</history:fullName>
                                    <history:email>test3@qa.webex.com</history:email>
                                    <history:pollResponse>No Answer</history:pollResponse>
                                </history:attendee>
                            </history:attendees>
                        </history:question>
                        <history:question>
                            <history:questionSequence>2</history:questionSequence>
                            <history:questionDesc>survey question 2 (multi-choiec/multi-answer)</history:questionDesc>
                            <history:questionType>2</history:questionType>
                            <history:answerChoices>
                                <history:answerChoice>survey answer D</history:answerChoice>
                                <history:answerChoice>survey answer C</history:answerChoice>
                                <history:answerChoice>survey answer B</history:answerChoice>
                                <history:answerChoice>survey answer A</history:answerChoice>
                            </history:answerChoices>
                            <history:attendees>
                                <history:attendee>
                                    <history:username>2128465757</history:username>
                                    <history:fullName>test</history:fullName>
                                    <history:email>test@qa.webex.com</history:email>
                                    <history:pollResponse>survey answer D,survey answer C</history:pollResponse>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465762</history:username>
                                    <history:fullName>test2</history:fullName>
                                    <history:email>test2@qa.webex.com</history:email>
                                    <history:pollResponse>survey answer C,survey answer B</history:pollResponse>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465767</history:username>
                                    <history:fullName>test3</history:fullName>
                                    <history:email>test3@qa.webex.com</history:email>
                                    <history:pollResponse>No Answer</history:pollResponse>
                                </history:attendee>
                            </history:attendees>
                        </history:question>
                        <history:question>
                            <history:questionSequence>3</history:questionSequence>
                            <history:questionDesc>survey question 3 (short answer)</history:questionDesc>
                            <history:questionType>3</history:questionType>
                            <history:attendees>
                                <history:attendee>
                                    <history:username>2128465757</history:username>
                                    <history:fullName>test</history:fullName>
                                    <history:email>test@qa.webex.com</history:email>
                                    <history:pollResponse>AAA</history:pollResponse>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465762</history:username>
                                    <history:fullName>test2</history:fullName>
                                    <history:email>test2@qa.webex.com</history:email>
                                    <history:pollResponse>BBB</history:pollResponse>
                                </history:attendee>
                                <history:attendee>
                                    <history:username>2128465767</history:username>
                                    <history:fullName>test3</history:fullName>
                                    <history:email>test3@qa.webex.com</history:email>
                                    <history:pollResponse>No Answer</history:pollResponse>
                                </history:attendee>
                            </history:attendees>
                        </history:question>
                    </history:questions>
                </history:poll>
            </history:polls>
        </serv:bodyContent>
    </serv:body>
</serv:message>

Odgovor je drugačiji ako sastanak nije pronađen, ne pripada korisniku koji ga zahteva ili ako korisnik koji ga zahteva nije i administrator lokacije.

Primer odgovora:

<serv:message xmlns:serv="http://www.webex.com/schemas/2002/06/service" xmlns:com="http://www.webex.com/schemas/2002/06/common" xmlns:history="http://www.webex.com/schemas/2002/06/service/history">
    <serv:header>
        <serv:response>
            <serv:result>FAILURE</serv:result>
            <serv:reason>Sorry, no record found</serv:reason>
            <serv:gsbStatus>PRIMARY</serv:gsbStatus>
            <serv:exceptionID>000015</serv:exceptionID>
        </serv:response>
    </serv:header>
    <serv:body>
        <serv:bodyContent/>
    </serv:body>
</serv:message>

Novo attendeeSendVideo opcija u API-jem CreateTrainingSession, SetTrainingSession I GetTrainingSession

Budući da opcije dostupne prilikom zakazivanja sesije Centra za obuku uključuju opciju "Pošaljivideo", XML API je sada dodao attendeeSendVideo opciju kreiranja, preuzimanje i podešavanje API-ja za sesije Centra za obuku.

Api-je koji utiču na to:

  • CreateTrainingSession

  • SetTrainingSession

  • GetTrainingSession

Dizajn

Opcija je uskladištena u DB tabeli WbxMMConfParam/paramvalue kao paramname = 'optionSupportSendVideo'

CreateTrainingSession Zahtevaj ispravke:

SetTrainingSession Zahtevaj ispravke:


Zahtev je samo za T32/XML API11.0.0.

GetTrainingSession Ispravke odgovora:

Promeni ConfName ograničenje veličine maksimalno na 128 znakova za prikaz

Niska imena konferencije ConfName je sada ograničen na najviše 128 znakova za prikaz. Ova promena se poravnava sa ograničenjem matične stranice J2EE. Ako API zahtev uključuje ConfName koja je prazna ili premašuje dužinu znaka prikaza od 128, prikazuje se sledeća poruka o grešci:

"060065 ime ulazne konferencije. Ime konferencije ne može biti prazno ili premašiti maksimalnu dužinu znaka prikaza 128."

Api-je koji utiču na to:

  • ConfName

Poruka o izuzetku promenjena u API-u LstRecording

Poruka o izuzetku bačena kada vremenski opseg upita premašuje maksimalno ograničenje API-ja LstRecording je promenjena. Upiti podrazumevano podržavaju 4 nedelje snimanja. Zahtevi duže od četiri nedelje dobijaju sledeću poruku o grešci:

"999999 prekoračenje maksimalnog vremenskog opsega upita u trajanju od 28 dana".

Api-je koji utiču na to:

  • LstRecording

Ispravke za XML API 11.0.0 SP10

Ispravka XML API 11.0 SP10 nema promene šeme.