If someone reports an issue with:

• Meetings or calls using Call on Webex—You can search for the email of the host or participants, the 9-digit meeting number (also known as meeting access code), the conference ID, or the caller or callee's email address.
• Calls using Webex Calling—You can search for the caller or callee's email address that's registered with Webex Calling, MAC address of the phone, phone number, or call ID.

You have access to information such as what people were up to during the meeting or call (like hosting or sharing), how long it took them to join, and how long the meeting or call lasted.

By default, the table is sorted by the latest start date of meetings and calls, but you can sort the table to see either meetings or calls first by clicking on the Service column.

The time zone is set according to your profile setting, but you can change it next to the date selector.

Search by email address

Enter someone’s email address, including the domain, to find out more about meetings and calls that they attended, along with a high-level overview of their media quality metrics in those meetings and calls.

KPIs

The following KPIs help you see how often the user had poor quality meetings or calls:

• Poor Meeting Minutes—Number of Webex Meetings minutes where the user experienced poor media quality.
• Total Meeting Minutes—Total number of minutes that the user was in meetings using Webex Meetings.
• Poor Minutes of Call on Webex—Number of minutes using Call on Webex where the user experienced poor media quality.
• Total Minutes of Call on Webex—Total number of minutes that the user was in calls using Call on Webex.
• Poor Webex Calling Minutes—Number of Webex Calling minutes where the user experienced poor media quality.
• Total Webex Calling Minutes—Total number of minutes that the user was in calls using Webex Calling.

Meetings and calls list

This list organizes meetings and calls starting from the most recent. The information available in this list are:

• Overall—Overall media quality of the meeting or call across all participants.
• Personal—The user's personal media quality in the meeting or call.
• Service—The service used for the meeting or call.
• Start Time—The time that the meeting or call started. The timezone is based on what you selected.
• Meeting / Caller number—The 9-digit meeting access code used to join the meeting or the number that the user called.
• Name—Name of the meeting or call.
• Host / Caller—The user who hosted the meeting or the user who initiated the call.
• Participants—Number of participants in the meeting or call.
• Duration—The total duration of the meeting or call.
• Site / Location—The Webex Meetings site if it was a meeting or location assigned to the user if it was a call.
• Conference / Call ID—Unique identifier of the meeting or call.

Visualization view

The visualization view shows you a timeline view of the meetings and calls that the user attended. Each dot represents a meeting or call. Hover over a dot to see a short description of the meeting or call. You can click on the name of the meeting or call to open up a new tab that redirects you to its details page. Different devices are split into multiple rows so you can quickly glance and see if a user's poor quality is coming from a specific operating system or device.

Search by meeting number

Meeting numbers are also known as the 9-digit access code. This number may not be unique across meetings. For example, a person's Cisco Webex Personal Room access code doesn't change from meeting to meeting.

Enter the 9-digit number without spaces or dashes. A list of meetings that match your search criteria display.

Search by name of cloud-registered device

Enter a device name to find out more about meetings and calls that they were used in, along with a high-level overview of the media quality metrics of the device in those meetings and calls. If you search for a partial device name, a drop-down list shows you the closest match that you can select from.

Search by conference ID

Every meeting or call has a unique conference ID. The conference is an internal ID that isn't commonly available to users. You can locate this ID through Analytics.

Enter the conference ID in the search field. Conference IDs are 9 to 18 characters in length and can be alphanumeric. Once you enter an ID, you're taken straight to the details page for that meeting or call.

Search by phone number

Calls made using Webex Calling usually have a caller and callee phone number. Enter the phone number in the search field for an exact string match. The listing view will show all calls that were either made to or received from that phone number.

Search by call ID

Every call leg (or hop) has a call ID. The call ID is an internal ID that isn't commonly available to users. It's primarily used by the support team.

Enter the call ID in the search field, which is an alphanumeric string. Once you enter the call ID, the listing view shows the call in which the call ID occurred.

Limitations

• Wildcard searches, like searches that use special characters, are not supported.
• Data isn't available for audio-only meetings, where every participant in the meeting (including the host) dialed into the meeting and no one joined through a client or device.
• If the meeting was scheduled in a space, then use the meeting number to find the meeting if you can't find the meeting using the host's email address. You can find the meeting number by going to the space, selecting the activity menu and choosing Meetings, then Space meeting information.

Once you select a meeting from the search view, you see the details for that meeting. This view lists all the participants on the left side, participant usage and quality information in the middle, and a sliding right panel with specific meeting or call details.

Key performance indicators (KPIs)

KPIs are available at the top to give you a quick view of the media quality experienced during the meeting. The KPIs available are:

• Total participants—The number of participants who joined the meeting. When it's a meeting, the number of guests are shown at the bottom of this KPI. When it's an event, panelists are shown at the bottom. Click on the filter icon to only show guests or panelists.

• Poor audio minutes—The percentage of audio minutes at or above the poor media quality threshold out of the total minutes in the meeting. Click on the filter icon to sort participants who had the most poor audio minutes at the top.

• Poor video minutes—The percentage of video minutes at or above the poor media quality threshold out of the total minutes in the meeting. Click on the filter icon to sort participants who had the most poor video minutes at the top.

• Poor sharing minutes—The percentage of sharing minutes at or above the poor media quality threshold out of the total minutes in the meeting. Click on the filter icon to sort participants who had the most poor sharing minutes at the top.

• Unexpected drops—The percentage of participants who left the meeting early due to a connection, software, or hardware issue. Click on the filter icon to sort participants who had the most unexpected drops at the top.

Join in-progress meetings

If you’re a full administrator with the Advanced Troubleshooting Access role, then you can join a meeting that’s in progress to help make sure the meeting runs smoothly. Click Join in the meeting view, and you’ll join the meeting as a guest.

Enable auto refresh for in-progress meetings

To enable auto refresh, click the Actions button when viewing an in-progress meeting and then select Enable auto refresh. The in-progress meeting information automatically updates every two minutes, or you can manually refresh the meeting information again.

Participants list

The name of the participant or device, and the icon of the device used to join the meeting, shows up on the left. If someone joins a meeting using their Webex client and they connect audio with call back over PSTN, then two entries are shown. For example, when you call into a meeting and your Webex App is paired with a Cisco Room Device, there are two entries: Webex App and Room Device.

View which participant paired with a device

When a participant uses a device or connects through PSTN to join a meeting, the name of the participant shows up under the device. This helps you see which participants paired with which device, making it easier for you to reach out to the correct participant to assist them.

Hover over a participant to see a short summary about the participant, such as the client type used to join the meeting. When someone calls into a meeting, you can see what time they joined the meeting and the amount of time that they were in the meeting.

Submit feedback

Click on the announcement button next to the information available to let us hear your thoughts. If you think the information's helpful, you can give it a thumbs up. If you don't think an information's helpful, click on the edit button to write down your comments on how we can improve the information for you.

Join meeting time (JMT)

The JMT for each client is captured with the exception of calls using PSTN. JMT is calculated in seconds as (the time from clicking the meeting link to loading the preview window) + (the time from clicking the Join Now button in the preview window to connecting into the meeting).

JMT doesn’t count the time the user spends browsing menus, making selections in the preview window, or waiting in the lobby.

A JMT of less than 10 seconds is shown in green, between 10 and 20 seconds is shown in yellow, and over 20 seconds is shown in red. Hover over the colored dot to see the JMT of a participant.

Meeting Details

Meeting details are shown on the right-side sliding panel, and can be collapsed with the button.

A legend is provided under the Meeting Details panel. Hover over the information icon to see how the thresholds are defined.

Audio, video, and sharing tab

You can switch between the audio, video, and sharing tabs to see the detailed views of a meeting or call, which includes JMT, usage, and quality metric.

How media quality data is captured

Media quality data is captured every minute and visualized using green (good), yellow (fair), or red (poor). These colors are based on the end-to-end packet loss and average latency only. The types of packet loss captured are:

• End to End—The speaker's sending packet loss from their Webex client to the participant's Webex client, captured after packet recovery.

• Sending—Participant's Webex client to the Webex cloud.

• Receiving—Webex cloud to the participant's Webex client.

If you see a dotted gray line, it means the audio, video, or sharing of the device is turned off. If you see a solid gray line, that indicates only minimal data is available, like usage and JMT. Solid gray lines mean the user joined the meeting with an application or device that is older than the minimum supported version or a Cisco on-premises device.

You can hover over a line to see a summary of the quality metric as a pop-up.

Host and panelist indicator

An H icon indicates when a participant becomes the host of the meeting.

A P icon indicates who were the panelists during a Webex Events session.

Share indicator

A blue line shows who's sharing their screen and how long they shared their screen for.

Hardware and network change indicator

A purple diamond icon indicates when a participant changes their network connection, headset, microphone, or camera during a meeting. Hover over the icon to see the change details.

Mute indicator

The dotted line shows you how long a participant was muted for, and you can hover over the icon to see if the participant muted and unmuted multiple times within that duration.

End meeting indicator

If a participant joined a meeting using VoIP with the Webex Meetings app, Webex App app, or a device, then you can see how a meeting ended for that participant. A green line icon indicates when a participant left a meeting normally, while a red line icon indicates when a participant left a meeting unexpectedly, such as getting dropped from a meeting due to a system or network issue.

View individual breakout sessions

A blue line represents if a breakout session was started within a meeting. You can click on the blue line to see which participants joined the breakout session, and how long they were in there for. Use this information to help you isolate issues within a specific breakout session.

Details tab

The details tab provides a table view of participants. You can see how long they were in the meeting or call for, the client and platform they used to join a meeting, their IP addresses, their hardware information, how they ended a meeting, the location they joined from, and if they were the host. You can use the scroll bar to see additional information, such as the participant's dialed #, audio, video and share transport and codec, microphone, speaker, and camera. This table can be exported to a CSV file using the Export Record button at the top right.

The following table shows what details data is available.

Export

From the meeting or participant view, you can export meeting information in a JSON file. You can also export the participant list and details to a CSV file.

Map tab

The map view gives you a visualization of the locations that participants joined the meeting from and the data centers that they connected to. With this information, you can determine if there's a pattern for participants who are experiencing media quality issues. Did certain areas have participants with poor media quality, or was it a specific data center? Are participants connecting to the most optimal data center closest to their area? Did a participant have poor media quality because they connected to a data center that's farther away from them? This map view can help you find possible answers to those questions so you can narrow down issues and proactively figure out if there's a problem before more users are affected.

The number in the circle shows how many participants joined from that area. Hover over a location to see the names of the participants in that area, what their media quality was like, and the data center that they connected to.

Participants with poor media quality

If a participant reaches the poor media quality threshold for three minutes continuously or for a total of five minutes, the circle becomes red. Media quality thresholds for this map are calculated as:

• Poor—End-to-end receiving packet loss > 5% or latency > 400ms.

• Good—Everything else.

You can click on a participant's name to see their media quality details during the meeting.

Participants with an unknown location

Participants whose locations are unknown are placed in a square at the bottom-left side of the map.

For information on how to troubleshoot calls that use Webex Calling, see Troubleshoot Webex Calling Media Quality in Control Hub.

When you select a call from the list, you get information that's similar to the meeting view, such as media quality data for the participants and the audio, video, sharing, and details tab. The difference is that calls don't have the KPIs at the top and the Map tab. You can also find out the details about the call on the right-hand panel, like the calling session ID, the date and time of the call, and who initiated the call.

Call Details

Click a participant name to see the detailed metrics of their client and device. All information is updated every minute. Additional information about a participant's equipment and network can be found on the right side.

Participant details

• Click the down arrow on any of the charts to collapse them.

• Filter between showing All, Sending, Receiving, or End to End details with the drop-down menu in the right corner.

• Filter out the average or maximum latency of each chart by clicking the icons for them.

• Audio Quality, Video Quality, Share Quality, CPU Usage, and Memory Usage data is updated every minute for meetings that are in progress.

  Click the red or yellow line segments to highlight the selection with a vertical bar, then hover over each of the line to show the pop-up with the actual value and timestamp of each chart.

  • Audio Quality—The network quality of the audio channel for that participant throughout the meeting.

  • Video Quality—The network quality of the video channel for that participant throughout the meeting.

  • Share Quality—The quality of any content shared during the meeting. The share quality includes information on how content was sent and received.

  • CPU Usage—The percentage of the CPU that was used by the machine that the participant joined the meeting with.

  • Memory Usage—The percentage of memory that was used by the machine of the participant during the meeting.

Mute indicator

A mute icon indicates when a participant was muted during a meeting. The mute indicator shows for participants who clicked the mute button on the Webex Meetings desktop and mobile app, the Webex App desktop and mobile app, and cloud-registered room devices. If a participant was muted through an external hardware, like a microphone, then the mute indicator doesn't show.

The following quality metrics are available.

Equipment and Networks details

The Equipment and Networks panel shows you information about a participant's configuration. You can collapse the panel with the button.

Similar information is available for the Webex Meetings Desktop application, Webex App Desktop application, Webex App for Android, Webex App for iPhone and iPad, and cloud-enabled devices. Webex Meetings for mobile, on-premises devices, and third-party SIP devices will be supported in the future.

For PSTN: Call In and Call Back, only phone numbers or conference bridge information is available.

The following table shows available equipment and network data.

The Live Meetings tab shows all the meetings that are currently in progress in your organization. You can use the information here to proactively catch network issues before they become widespread, or to help diagnose the cause for any network issues. Data automatically updates every 10 minutes. You can see when the last time the data was updated next to the Export as JSON button.

By default, the page shows you the live meetings for all the sites in your Control Hub organization. If you have multiple sites, you can use the drop-down menu to select a specific site.

Key performance indicators (KPIs)

KPIs are available at the top of the page to show you the number of live meetings and how many meetings and participants are experiencing good network. You can use these KPIs as measurable data to see if any network issues have been happening recently. The KPIs available are:

• Total Live Meetings—The number of meetings that are in progress.

• Total Live Participants—The number of participants that are currently in meetings.

• Meetings with Good Network—The number of meetings that are at or above the good network quality threshold. Quality is counted as good if packet loss was less than or equal to 5% and latency was less than or equal to 400ms. Meetings are counted as poor quality if at least one participant had poor audio or video quality in the last 15 minutes.

• Participants with Good Network—The number of participants that are at or above the good network quality threshold. Quality is counted as good if packet loss was less than or equal to 5% and latency was less than or equal to 400ms. Participants are counted as poor quality if they had three consecutive minutes or five accumulated minutes of poor audio or video quality during a meeting.

Live meetings map

This map shows the overall geographic distribution of live meetings. You can hover over each circle to see more data about a location, such as the number of participants, meetings, and poor quality meetings. You can also select the data centers to which the participants in a location are connected. The names for the data centers are abbreviated. The size of the circle is based on how many participants there are, and the color is based on how many poor-quality meetings a location is experiencing.

Network performance

This chart shows a trend of the latency and packet loss experienced by participants during meetings that are in progress. You can switch between data for audio and video. You can also adjust the sliding bar to see what the 95th percentile was between a 24-hour period.

IP by network performance

This chart shows a breakdown of IP addresses and the network quality of participants who connected to those IP addresses. IP addresses are partially masked to preserve the personal identity of users. You can use this chart to see if a specific location or service provider has a higher number of poor-quality meetings than average, and start troubleshooting from there.

Hover over the red bar to see the number, percentage, and location of poor-quality meetings from that IP address. Hover over the green bar to see the same breakdown of good-quality meetings from that IP address.

Live meetings search table

If you're a full administrator, read-only administrator, or support administrator with the Advanced Troubleshooting Access role, you have access to a table that shows all the meetings that are in progress. Use the search bar to search for specific meetings or quickly filter participants by interacting with the other charts.

For example, if you notice a location with lots of poor-quality meetings in the Live Meetings Map, you can hover over that location and click on the number next to # of Poor Quality Meetings. This will filter the table to only show the meetings that those participants are in.

Another example is in the IP by Network Performance chart. If you hover hover a red bar and click the number of poor connections, this will filter the table to only show the meetings where participants connected to that IP address.

Selected filters show before the search box, which you can remove by clicking the X.

To have a good experience during a Webex Meeting or call, a key requirement is to have good video and audio quality. Several factors can degrade media quality during the meeting, such as environment, equipment, or the network. For a more in-depth explanation of how troubleshooting works, see Troubleshooting Webex Meetings and Calls, which highlights key considerations when troubleshooting poor meeting or call experiences and outlines the tools available to you to help resolve them.