Type

Supported Models

IP Phones (desk phones)

The following Cisco IP Phones support Webex Calling:

  • Cisco IP Phone 6800 Series Multiplatform Phones (Audio phones—6821, 6841, 6851, 6861, 6861 Wi-Fi, 6871, 6871 with color display)

  • Cisco IP Phone 7800 Series Multiplatform Phones (Audio phones—7811, 7821, 7841, 7861). See note below.

  • Cisco IP Phone 8800 Series Multiplatform Phones*

    • Audio phones—8811, 8841, 8851, 8861

    • Video phones—8845, 8865


 

The Cisco IP 7821 and 7861 requires a V03 or later hardware version to convert to MPP.

Cisco IP 7841 requires a V04 or later hardware version to convert to MPP.

You can check the label on the back of the phone to find your version (VID).

To check which phone model and platform you have, press Applications and select Status > Product Information. The Model number field shows your phone model.

Your Cisco multiplatform device must run software version 11.2.3MSR1 or later (Cisco Webex Phone OS).

You can now on board Cisco Multiplatform devices with Cisco Webex cloud. See Webex Features available on Cisco MPP devices for details.

DECT Phones

Cisco IP DECT 6800 Series with Multiplatform Firmware

  • Cisco IP DECT 6823 Handset

  • Cisco IP DECT 6825 Handset

  • Cisco IP DECT 6825 Handset Ruggedized

  • Cisco IP DECT DBS 110 Base Station

  • Cisco IP DECT DBS 110 Repeater

  • Cisco IP DECT 210 Base-Station

Conference Phones

The following conference phones support Multiplatform Firmware:

  • Cisco IP Conference Phone 7832

  • Cisco IP Conference Phone 8832


 

Cisco Unified IP Conference Phone 8831 isn't supported.

Analog Telephone Adapters (ATAs)

  • ATA191 Multiplatform

  • ATA192 Multiplatform

  • VG400 ATA

  • AudioCodes MediaPack 1288 and 124E (On the Webex Calling platform, the MP-124E only supports 17 ports due to the mandatory encryption requirements.)

ATAs connect non-IP devices, such as analog phones, fax machines, and overhead paging systems, to your network and allow them to act as Webex Calling devices.

Phone Accessories

The following phone accessories support Cisco IP Phones with Multiplatform Firmware:

Use the following SKUs when you order an expansion module for a multiplatform phone:

  • Cisco IP Phone 6851—CP-68KEM-3PCC=

  • Cisco IP Phone 8851, 8861, and 8865—CP-8800-A-KEM-3PC=, CP-8800-V-KEM=, CP-8800-A-KEM=

  • Cisco IP Phone 8851, 8861, and 8865—CP-8800-V-KEM-3PC=, CP-8800-V-KEM=, CP-8800-A-KEM=

Key Expansion Module Limitations

Audio (A version) and Video (V version) Key Expansion Modules can be used interchangeably on supported devices, with these limitations:

  • Key expansion modules connected to multiplatform phones can be used for monitoring line overflow and manual long-press, speed-dial assignment.

  • Key expansion modules connected to multiplatform phones only support default background images.

  • Key expansion modules are used as overflow for Webex Calling and keys cannot be specifically assigned. If an administrator assigns more monitored lines than the phone can handle, the line status overflows to the key expansion module. For more information, see Cisco IP Phone 6800 Series and Cisco IP Phone 8800 Series Multiplatform Phones.

Cisco Webex Room, Board, and Desk Devices

The following Room, Desk, and Board devices are supported on the Webex Calling Platform.

See the Webex Calling Feature Support Matrix for the Webex Calling Features supported on the Room, Desk, and Board Devices.

For more information about these devices, go here.

To activate your Desk, Room, or Board device on Cisco Webex, the device must run software version CE8.3.4 or later or Room OS, depending on the device type.

You must use a TRC6 remote control with the SX20. The TRC5 is not supported.

Supported third-party devices

The use of third-party devices is intended to facilitate customer migrations to Webex Calling. The use of these devices on Webex Calling requires approval from your Cisco account manager in order to enable them for provisioning in Control Hub.


If using either Yea link or Poly devices on your Webex Calling service, the following device capabilities apply:

  • Provisioning and Deployment​

    • Manual Deployment (No Activations Code or EDOS support)​

    • Individual Device Provisioning through Control Hub (No Bulk)​

    • Locked Device Configuration (No 3rd Party Device Management)​

    • No Device Settings via Control Hub (No configuration overrides)​

  • Limited Advanced Features​

    • No Call Park Extensions​

    • No Hoteling​

    • No N-Way Calling​

    • No Executive or Executive Assistant​

    • No Call Recording Controls from Phone​

    • No Call Queue Agent from Phone​

    • No Local Media (ICE)

Type

Supported Models

IP Phones (desk phones)

The following Yea link Phones support Webex Calling

  • T3 Series Phone: T33G

  • T4 Series Phone: T41S, T42S, T43U, T46U, T46S, T48S, T48U

  • T5 Series Phone: T53W, T54W, T57W, T58A/T58V, EXP 40/50

The following Poly Phones support Webex Calling

  • VVX 101, VVX 150

  • VVX 201, VVX 250

  • VVX 301, VVX 311, VVX 350

  • VVX401, VVX 411, VVX 450

  • VVX 501

  • VVX 601

Conference Phones

The following Yea link Conference Phones support Webex Calling

  • CP920, CP960

The following Poly Conference Phones support Webex Calling

  • TRIO Series: 8300, 8500, 8800

Customer Managed

Door Phones/Intercoms, Speakers, and Pagers

Algo Supported Models

IP Speakers & Horns

  • 8180 (G2), 8186, 8188, 8189, 8190 & 8190S, 8196, 8198

IP Pager Adapter

  • 8301, 8373

IP Strobe Lights

  • 8128 (G2), 8138

IP Doorphones/Intercoms

  • 8028 (G2), 8063, 8201, 8300

IP Controllers

  • 8300

Singlewire/Informacast Supported Models

  • Singlewire Fusion

2N Supported Models

  • IP Style, IP Verso, IP Force, IP Solo, IP Base, IP Safety (Audio), SIP Speaker, SIP Speaker Horn, IP Indoor Contact, IP Indoor View, IP Indoor Talk

Grandstream Supported Models

  • GDS3710, GDS3705, GSC3510, GSC3505, GSC3615, GSC3610, GSC3629