Type

Supported models

IP Phones (desk phones)

The following Cisco IP Phones support Webex Calling:

  • Cisco IP Phone 6800 Series Multiplatform Phones (Audio phones—6821, 6841, 6851, 6861, 6861 Wi-Fi, 6871, 6871 with color display)

  • Cisco IP Phone 7800 Series Multiplatform Phones (Audio phones—7811, 7821, 7841, 7861) See the note.

  • Cisco IP Phone 8800 Series Multiplatform Phones*

    • Audio phones—8811, 8841, 8851, 8861

    • Video phones—8845, 8865, 8875


 

You can check the label on the back of the phone to find your version (VID).

To check which phone model and platform that you have, press Applications the Settings hard key and select Status > Product Information. The Model number field shows your phone model.

To migrate Enterprise phones to Webex calling, check the following:

  • Supported phone model

  • VID

  • Device eligibility

Refer to the Supported phone models section in the Migrate Your Phone to Webex Calling article for details.

Your Cisco multiplatform device must run software version 11.3.1MES5 or later.

On-board Cisco Multiplatform devices with Cisco Webex cloud. See Webex Features available on Cisco MPP devices for details.

DECT Phones

Cisco IP DECT 6800 Series with Multiplatform Firmware

  • Cisco IP DECT 6823 Handset

  • Cisco IP DECT 6825 Handset

  • Cisco IP DECT 6825 Handset Ruggedized

  • Cisco IP DECT DBS 110 Base Station

  • Cisco IP DECT 210 Base-Station

For Webex Calling/Wholesale, these offers apply:

  • Cisco IP DECT DBS 110 supports Single Cell deployments only with Repeaters.

  • Cisco IP DECT DBS 210 supports Single, Dual, and Multi Cell deployments with Repeaters.

Wi-Fi phones

Webex Calling supports these Wi-Fi phones:

  • Cisco 840

  • Cisco 860

Conference Phones

Webex calling supports these conference phones:

  • Cisco IP Conference Phone 7832

  • Cisco IP Conference Phone 8832

  • Polycom SoundStation IP 5000

  • Polycom SoundStation IP 6000


 

Cisco Unified IP Conference Phone 8831 isn't supported.

Analog Telephone Adapters (ATAs)

  • ATA191 Multiplatform

  • ATA192 Multiplatform

  • VG400 ATA

  • VG410 ATA

  • VG420 ATA

  • AudioCodes MediaPack 1288 and 124E (On the Webex Calling platform, the MP-124E only supports 17 ports due to the mandatory encryption requirements.)

ATAs connect non-IP devices, such as analog phones, fax machines, and overhead paging systems, to your network and allow them to act as Webex Calling devices.

Phone Accessories

The following phone accessories support Cisco IP Phones with Multiplatform Firmware:

Use the following SKUs when you order an expansion module for a multiplatform phone:

  • Cisco IP Phone 6851—CP-68KEM-3PCC=

  • Cisco IP Phone 8851, 8861, and 8865—CP-8800-A-KEM-3PC=, CP-8800-V-KEM=, CP-8800-A-KEM=

  • Cisco IP Phone 8851, 8861, and 8865—CP-8800-V-KEM-3PC=, CP-8800-V-KEM=, CP-8800-A-KEM=

Key Expansion Module Limitations

Use Audio (A version) and Video (V version) Key Expansion Modules interchangeably on supported devices, with these limitations:

  • Use key expansion modules connected to multiplatform phones to monitor line overflow and manual long-press, speed-dial assignment.

  • Key expansion modules connected to multiplatform phones only support default background images.

  • Key expansion modules are used as overflow for Webex Calling and keys can’t be assigned. If an administrator assigns more monitored lines than the phone can handle, the line status overflows to the key expansion module. For more information, see Cisco IP Phone 6800 Series and Cisco IP Phone 8800 Series Multiplatform Phones.

Cisco Webex Room, Webex Board, and Desk Devices

Webex Calling platform supports the following Room, Desk, and Webex Board devices. Some of these devices support native SIP registration. The devices that support native SIP registration also supports the Webex Calling features defined in the Webex Calling Feature Support Matrix.

For more information about these devices, go here.

Devices that support native SIP registration to the Webex Calling platform:

Devices that don't support native SIP registration to the Webex Calling platform:

To activate your Desk, Room, or Board device on Cisco Webex, the device must run the software version CE8.3.4 or later for Room OS, depending on the device type.

Use a TRC6 remote control with the SX20 as the TRC5 isn’t supported.

Supported third-party devices

The use of third-party devices facilitate customer migrations to Webex Calling. The use of these devices on Webex Calling requires approval from your Cisco account manager to enable them for provisioning in Control Hub.


 

If using either Yea link or Poly devices on your Webex Calling service, the following device capabilities apply:

Provisioning and Deployment​

  • Manual Deployment (No Activations Code or EDOS support)​

  • Individual Device Provisioning through Control Hub (No Bulk)​

  • Locked Device Configuration (No 3rd Party Device Management)​

  • No Device Settings via Control Hub (No configuration overrides)​

Type

Supported Models

IP Phones (desk phones)

The following Yealink Phones support Webex Calling

  • T3 Series Phone: T33G

  • T4 Series Phone: T41S, T42S, T43U, T46U, T46S, T48S, T48U, T40G

  • T5 Series Phone: T53W, T54W, T57W, T58A/T58V, EXP 40/50


     

    Control Hub supports T58A and T58V models through the T58V device type.

The following Poly Phones support Webex Calling

  • VVX 101, VVX 150

  • VVX 201, VVX 250

  • VVX 301, VVX 311, VVX 350

  • VVX401, VVX 411, VVX 450

  • VVX 501

  • VVX 601

  • SoundStation 5000, 6000

Conference Phones

The following Yealink Conference Phones support Webex Calling

  • CP920, CP960

  • CP925, CP965

The following Poly Conference Phones support Webex Calling

  • TRIO Series: 8300, 8500, 8800

Customer-Managed

Door Phones/Intercoms, Speakers, and Pagers

Algo Supported Models

IP Speakers & Horns

  • 8180 (G2), 8186, 8188, 8189, 8190 & 8190S, 8196, 8198

IP Pager Adapter

  • 8301, 8373

IP Strobe Lights

  • 8128 (G2), 8138

IP Doorphones/Intercoms

  • 8028 (G2), 8063, 8201, 8300

IP Controllers

  • 8300

Singlewire/Informacast Supported Models

  • Singlewire Fusion

    CyberData's Webex Calling Solution Endpoints

2N Supported Models

  • IP Style, IP Verso, IP Force, IP Solo, IP Base, IP Safety (Audio), SIP Speaker, SIP Speaker Horn, IP Indoor Contact, IP Indoor View, IP Indoor Talk

Grand stream Supported Models

  • GDS3710, GDS3705, GSC3510, GSC3505, GSC3615, GSC3610, GSC3629

CyberData devices

For a list of supported devices, see CyberData's Webex Calling Solution Endpoints.

Yealink DECT and Handset

The following Yealink and DECT Headsets support Webex Calling:

  • Bases - W52B, W60B, W70B, W56B

  • Handsets - W52H, W56H, W73H, W59R