What's new for administrators in Webex Contact Center
We want to make sure that you know about the major updates made available in Webex Contact Center for administrators—updates to the interface, new functionality, and ways to manage your contact center.
For announcements in older releases of Webex Contact Center, see What's new in Cisco Webex Contact Center 1.0.
October 1, 2024
Allow outdial call in all Multimedia Profiles
This feature enables agents to multitask between handling digital contacts and making manual outbound calls simultaneously. When agents communicate through a digital channel, they should still have the ability to manually dial out to a phone number if needed. This capability is essential for situations where an agent needs to contact a colleague, or reach out to a customer by phone while still managing digital interactions.
For more information, see Manage Multimedia Profiles.
September 30, 2024
Support for Dynamic Queues within Queue Task node in Webex Connect
Contact center flow developers working on digital channels can now configure the queue as a dynamic variable within the Queue Task node in Webex Connect. This enhancement allows developers to use a single node with a dynamic queue variable instead of multiple Queue Task nodes to route interactions into different queues.
For more information, see Queue task.
September 27, 2024
Ability to delete digital channel assets with or without active conversations
Administrators can now delete digital channel assets within Webex Connect with active or closed conversations created against them. However, after deleting the asset, you must manually clean up the stale entry point.
September 24, 2024
Webex Contact Center CRM Connector for ServiceNow's Xanadu Edition
Enhance your contact center operations with the Webex Contact Center CRM Connector for ServiceNow's Xanadu Edition. Easily integrate your Webex Contact Center data into ServiceNow, providing your agents with a unified view of customer interactions. Simplify processes, improve efficiency, and deliver exceptional customer service.
For more information, see the Integrate Webex Contact Center with ServiceNow article.
September 20, 2024
Customer Journey Data Service (CJDS) APIs and Customer Journey Widget (Version 10)
We're excited to announce the General Availability for CJDS APIs and the Customer Journey Widget (version 10) for all our customers. These powerful tools are designed to elevate your customer journey management capabilities to the next level.
What is CJDS?
CJDS is an innovative platform that empowers organizations to convert data into actionable insights, enhancing customer experiences across all interaction points. With CJDS APIs, you can:
-
Listen: Integrate seamlessly with any data source or third-party applications to capture and analyze diverse data streams.
-
Identify: Create dynamic customer profiles by identifying and capturing key propensity drivers.
-
Analyze: Utilize aggregation techniques to extract meaningful insights from all collected customer data.
-
Act: Implement these insights to dynamically adjust Webex Contact Center workflows and personalize customer experiences at a granular level. Additionally, real-time actions can also be triggered using our rule-based mechanism.
What is Customer Journey Widget (Version 10)?
In conjunction with the APIs, we're also introducing the Customer Journey Widget—a groundbreaking tool that provides your agents with a comprehensive view of each customer's journey. This widget equips your agents with the insights they need to deliver personalized, efficient, and informed customer service, supported by a deep understanding of each customer's history.
Get Started with CJDS APIs and Customer Journey Widget (version 10)
For more information on these features and how to get started, refer to the following resources:
September 13, 2024
Topic Analytics
We are thrilled to announce the general availability of Topic Analytics following a successful beta phase with over 30 customers. This AI feature, powered by large language models (LLMs), is now accessible to all customers on Flex 3. With Topic Analytics, you can:
- Identify the primary reasons your end customers are calling the contact center.
- Filter interactions by specific topics.
-
Access detailed interaction information, including transcripts, call recordings, and contact details.
For more information, see here.
September 4, 2024
Current Usage Card - Agent & IVR on Control Hub's Contact Center Landing Page
We are excited to announce that the newly improved License Current Usage Card on Control Hub's Contact Center Landing Page is now available across all Webex Contact Center data center regions: ANZ, CA, EU, JP, UK, SG, and US.
This enhanced card enables Administrators and users with access to the Contact Center Landing Page to view the usage of Premium and Standard Agent Licenses, as well as IVR licenses, within their subscription during the current billing cycle. The card displays key information, including the current billing cycle, the number of licenses purchased, and whether the usage is over or under the allowed amount.
Additionally, the Agent and IVR usage cards provide access to the Daily Detail reconciliation view, which facilitates viewing and downloading daily usage data from the current and previous billing cycles.
We are pleased to announce that we have achieved usage data and billing parity across all seven Webex Contact Center regions.
Thank you for your continued support as we enhance our services to provide you with comprehensive and transparent usage information.
September 2, 2024
Rank Queues
Webex Contact Center provides an ability to rank queues for each team. The queue ranking feature allows administrators and supervisors to rank the queues so that contacts from the queues are offered to agents in ranked order. For example, suppose that TeamA can take calls from queues Billing and Sales. You can use queue ranking to assign a higher rank to the Billing queue, so when calls come into the queues, those from Billing will be routed to TeamA ahead of those from Sales.
If you assign a rank only to some of the queues, calls in those queues will take precedence over calls in the queues for which no priority is specified.
For more information, see Rank queues.
July 31, 2024
Automated Provisioning and User Syncing for Webex Connect
-
Webex Connect will be automatically provisioned at the same time as Webex Contact Center. Admins will no longer need to navigate to the digital section of Control Hub to initiate provisioning. The Webex Connect URL will show in control hub for new and existing Webex Contact Center tenants. This will allow for admins to navigate easily to connect across all their tenants without having to bookmark the URL.
-
All partner admins and the first customer admin created will be able to navigate into connect to start configuring immediately without needing to create a separate user login. User management for these personas are synced between Contact Center and Connect.
-
Any customer admin created beyond the first admin will need to be added in Control Hub first then Connect. The Webex Contact Center and Webex Connect team are working to sync these admins in a future release.
For more information, see here.
July 29, 2024
Dialogflow CX Integration for Digital Channels
Google Dialogflow CX Integration is now generally available on Webex Contact Center for digital channels.
Dialogflow CX is an advanced version of Dialogflow ES. While Dialogflow ES is suitable for simpler chatbot applications, Dialog flow CX is tailored for complex, multi-turn conversational experiences, especially in enterprise-level contexts.
Dialogflow CX integration is currently available on request through the backend team. Please reach out to your Customer Success Manager to request access and supporting material.
July 26, 2024
Cisco Text-to-Speech (TTS)
We’re thrilled to announce the arrival of a new feature called Cisco TTS (Text-to-Speech) for all Flex 3 subscription-based customers on our Next Generation media platform. With TTS, users can enjoy out-of-the-box text-to-speech capabilities, unlocking a whole new level of convenience and accessibility. With this capability, customers can use static or dynamic text (content), synthesize it, and get speech content that enhances the end-user experience with high-quality voices such as Neural TTS.
For more information, see Text-to-Speech-(TTS) in Webex Contact Center.
July 24, 2024
Dynamic Variable Support for GoTo and Business Hours on Flow Designer
The Webex Contact Center Flow Designer now supports the use of dynamic variables for GoTo and Business Hours activities. This enhancement enables flow developers to specify the behavior of these activities through variables, allowing for more effective reuse of flows. The primary advantage of this feature is that developers can create a single flow with these activities and dynamically modify their functionality at runtime with the help of variable support. Additionally, the GoTo Activity has been enhanced to offer improved error handling capabilities.
For more information see, GoTo and Business Hours activities in Activites in Flow Control section of Webex Contact Center Setup and Administration Guide.
June 27, 2024
Introducing Activity Wait Audio on Flow Designer for HTTP(s) delays
Flow Designer now supports interruptible and partial audio playback for activities awaiting completion, such as HTTP requests. This feature enhances customer experience by providing audio feedback during request processing or delays. Designers can apply this setting globally at the flow level, automatically affecting all HTTP activities within the flow and any subflows. Subflows will inherit this activity wait setting from the invoking flow, ensuring consistent audio feedback across all levels.
For more information see, Activites Wait Settings in the HTTP Request section of Webex Contact Center Setup and Administration Guide.
June 25, 2024
Empowering you with Customer Journey Data Services
Customer Journey Data service (CJDS) is a next-generation customer journey management service empowering organizations to go from Data to Insights to Action. CJDS enables businesses to capture customer journeys across any channels/application, identify insights and take real-time actions to provide an excellent customer experience.
With CJDS, customers can access our APIs that focus on key aspects of the customer journey.
-
Listen: Integrate with any data source or third-party applications to listen to disparate data sources.
-
Identify: Create a dynamic customer profile capturing propensity drivers.
-
Analyze: Apply different aggregation techniques to all customer data collected.
-
Act: Use the data/insights within CJDS to dynamically change the flow within Webex Contact Center Flow Control and personalize the customer experience at a granular level. These insights are visible to customer-facing teams in real time through Agent Desktop via the journey widget.
For more information, see here.
June 25, 2024
New Customer Journey Widget (version 10)
We're rolling out the Customer Journey Widget—a tool designed to revolutionize the way your team engages with customers. This isn't just data; it's a window into each customer's world, showing you every step they've taken with your brand. Your agents will soon be able to provide a service that's not just efficient, but personal and informed by a complete understanding of the customer's history.
For detailed instructions on enabling and customizing the widget, please refer to the instructions provided here. If you're interested in understanding the widget from an agent's perspective, you can find comprehensive documentation here.
How to use? Click here for the vidcast.
June 18, 2024
AWS Direct Connect for Webex Contact Center
AWS Direct Connect is a networking service that provides an alternative to using the internet to connect to AWS including Webex Contact Center. Using AWS Direct Connect, data that would have previously been transported over the internet is delivered through a private network connection between your facilities and AWS.
In many circumstances, private network connections can reduce costs, increase bandwidth, and provide a more consistent network experience than internet-based connections.
Webex Contact Center supports AWS public VIFs only and is not compatible with private VIFs. Public VIFs end the connection in the AWS network. From there, traffic to the Webex Contact Center endpoints is routed through the AWS network.
For more information, see AWS Direct Connect in Webex Contact Center.
Pricing
AWS Direct Connect is a cloud network service available from Amazon. For information related to pricing, see AWS Direct Connect Pricing.
June 14, 2024
Interactive Voice Response Control Hub Survey Reporting Enhancement
We are excited to announce that WxCC’s survey reporting in Control Hub now offers detailed information on agents, queues, sites, and more for each survey question. This enhancement will accelerate your data-to-insights process by simplifying the slicing and dicing of survey results. For more information see here.
June 5, 2024
Supporting Apple Messages for Business (AMB)
Webex Contact Center is set to enhance customer engagement by integrating with Apple Messages for Business (AMB), enabling brands to connect with customers directly through Apple's ecosystem. This integration will offer a variety of rich interactive messaging options, such as list pickers, time pickers, forms, and quick replies, which are perfect for brands aiming to elevate their customer experience.
With these features, administrators will have the ability to set up and deploy automated customer journeys using Webex Connect’s Flow Builder. Additionally, they can configure an escalation path to seamlessly transfer conversations to a live agent within the Contact Center when needed.
To explore the full capabilities of this channel and how it can benefit your brand, click here for more details.
To start with, Webex Contact Center will be supporting the required features prescribed by Apple for BOTS and Contact Center.
For more information, see Set up digital channels in Webex Contact Center and Supported attachment types for digital channels in Webex Contact Center.
May 31, 2024
IVR based campaign
As a part of proactive outreach functionality, IVR based campaigns enable administrators to configure Progressive and predictive pacing mode to dial out contacts using IVR based campaign. Also known as 'Agentless campaign', this feature enables customers to record messages and send the recorded messages to customers as part of the campaign calls. Additional functionality includes to queue the contact to an agent or send a digital notification based on the contact selection. A new report called IVR based campaign report will be created for this feature.
For more information, see IVR Based Campaign Calls in the Configure Voice Outbound Campaign Modes in Webex Contact Center article.
May 31, 2024
Provisioning and Subscription Simplification for Webex Connect and Engage
-
Reduced errors and time to provision through an improved API implementation for Webex Connect and Engage provisioning.
-
Webex Connect and Engage tenant URLs are displayed in both the quick links section and digital channels section of Control Hub for quick access. Connect URLs will only show in newly created tenants.
-
Webex Connect Subscription ID is updated to match the latest Webex Contact Center subscription for seamless billing.
May 30, 2024
Reset Longest Available Agent status once a contact is received
Webex Contact Center sends the contact based on the Longest Available Agent status (LAA Routing). Longest Available Agent status is reset for all channels of an agent when one contact is assigned to an agent. In an agent surplus scenario, the next contact of any media type queued will be assigned to the next longest available agent.
This has been changed from the earlier way of assigning contacts where we used to fill up the channel capacity before assigning the contacts to the next agent.
For more information, see Longest available agent (LAA).
May 21, 2024
Custom event handling for Digital Contact Close Event
This enhancement for digital channels provides a mechanism to indicate to the system not to close and clean up a contact on the agent end. This is needed in situations where automated messages need to be sent to the client post agent end but before the contact is closed.
The custom flow provided by flow developer takes the responsibility of closing the task.
May 16, 2024
Webex Calling Agent Support - with vPOP PSTN Support - inbound vPOP Call to WxC Agent support (mixed mode deployment)
Webex Contact Center supports Webex Calling-based agents with Voice POP and Webex Contact Center PSTN. If your organization is configured to use Voice POP or Webex Contact Center PSTN, then Webex Contact Centre now also supports routing of calls to Webex Calling-based agents.
To use this feature, your organization must have a Webex Calling subscription and your agents must be using a phone or Webex app registered to Webex calling within the same organization. Webex Contact Centre routes all agent calls to Webex calling when the agent number or extension is a Webex Calling on-net number or extension. If the agent number or extension is not a Webex Calling on-net number or extension, then the call is routed back to VPOP/WxCC PSTN trunk/service.
For more information, see Set up voice channel for Webex Contact Center.May 16, 2024
Synchronization of Webex Calling state with Webex Contact Center state
This feature allows Administrators to configure the synchronization of agents’ states between Webex Calling and Webex Contact Center. This eliminates the need for agents to manage their state across both applications by setting themselves as unavailable when engaged in non-contact center activities. This, in turn, lowers the chance of 'RONA' (Redirection on No Answer), providing a better experience for the caller and improving routing efficiency.
For more information, see Manage desktop profiles and Use Webex App in Webex Contact Center Desktop.
May 16, 2024
Bridge Transfer in Flow Designer
Cisco's new capability to Flow Designer is called Bridged Transfer. Bridged transfer is a new flow activity that allows a flow architect to add a managed transfer to a third-party destination within flow builder. The typical use case for this activity would be to extend a call out to a third-party IVR service.
Bridged Transfer can transfer a call based on a static number or use the value of a flow variable. It also provides a timeout, if the third-party doesn't answer the call. On successful completion of the transfer (when the third party hangs up), the flow resumes in Webex Contact Center. If the transfer fails for reasons like 'busy' or 'unavailable.' the activity provides a result variable with the failure.
Bridged Transfer complements the existing Blind Transfer activity by enhancing the capabilities of a flow.
For more information, see Bridged Transfer section in Webex Contact Center Setup and Administration Guide.
May 16, 2024
Enhanced E911 Support for WebRTC Users
With the integration of WebRTC support, administrators can utilize the Redsky Emergency solution, ensuring compliance with U.S. and Canadian federal regulations. This feature will enable you to provide precise location information for emergency calls, seamlessly integrating with our robust contact center solution.
For more information, see Provision Emergency Calling in Webex Contact Center for Administrators.
May 16, 2024
WebRTC support for Webex Contact Center
Webex Contact Center is introducing WebRTC (Web Real-Time Communication) support for Agent Desktop using the Next Generation Media Platform (RTMS).
With this feature, agents can use Agent Desktop with a headset without an external phone or extension number. Agent Desktop supports all current voice functionalities such as hold, retrieve, transfer, and conference. Features such as mute, auto-answer, and dial pad are added to Agent Desktop to facilitate browser-only use. Also, when an agent signs in using a browser, a new WebRTC status indicator shows whether the voice service is up, down, or in a connecting state.
This gives customers greater freedom and flexibility in deploying agents, minimizing costs, and reducing onboarding times to deploy or expand a new contact center.
For more information, see Sign in to Agent Desktop.
May 10, 2024
Synchronize agents' state between Webex Contact Center and Microsoft Teams
You can configure a more seamless communication workflow with the two-way presence synchronization feature. This new update allows you to synchronize the state of your agents between Microsoft Teams and Webex Contact Center. This reduces the need for context switching and manual status updates, thereby minimizing 'RONA' (Redirection on No Answer). For more information, see Integrate Webex Contact Center with Microsoft Teams.
May 9, 2024
Flow Designer usability enhancements
Flow Designer now features several usability enhancements that improve the flow developer experience and maximize efficiency while designing orchestration workflows:
- Curved links are now the default, with error paths highlighted, accompanied by an extended color palette to easily differentiate between links.
- Preview flows while connecting them in a GoTo activity. These flows are now accessible via hyperlinks and can be previewed when selected as a target. For more information, see GoTo Activity section in Flow Designer chapter of Setup and Administration Guide.
-
The enhanced percentage allocation activity now allows developers to easily deactivate existing allocations by supporting 0% allocations for exit paths that are no longer needed. For more information, see Percentage Allocation section in Flow Designer chapter of Setup and Administration Guide.
-
A new Click-to-Connect toggle saves time when connecting activities, enabling developers to simply click on activities to link them, thereby streamlining the process of connecting activities.
May 8, 2024
Track Agent and IVR License Usage with Reconciliation View
Control Hub Users, the ability to see daily Agent and IVR license usage is now available in our 'reconciliation view' feature. This update to the Control Hub, Contact Center 'Current Usage Cards' lets you view your current usage against your subscription each day, giving you a clear picture of where you stand.
This feature is initially accessible in the US, UK, and EU regions. Full access will gradually extend to all eligible users within these regions, simplifying license management for Contact Centers. Global rollout will follow later this year.
For more information, see the Cisco Webex Contact Center license consumption and reporting help article.
May 7, 2024
Flow Import and Export APIs on Developer portal
The Webex Contact Center Developer Portal offers Flow Import and Export APIs to import and export flow configurations programmatically. This simplifies the management of a large number of flows and supports robust development workflows. Developers can import flows into their system by submitting a JSON configuration file, allowing for the creation or updating of multiple flows at once. Developers can export flows from their system into a JSON configuration file, useful for backup purposes or for transferring configurations between environments.
For more information, see the Developer portal documentation.
May 6, 2024
New Customer Journey Widget (version 10)
We're rolling out the Customer Journey Widget—a tool designed to revolutionize the way your team engages with customers. This isn't just data; it's a window into each customer's world, showing you every step they've taken with your brand. Your agents will soon be able to provide a service that's not just efficient, but personal and informed by a complete understanding of the customer's history.
For detailed instructions on enabling and customizing the widget, please refer to the instructions provided here. If you're interested in understanding the widget from an agent's perspective, you can find comprehensive documentation here.
How to use? Click here for the vidcast.
May 3, 2024
Progressive Campaign (CPA Release)
Dialing technologies have changed the way contact center agents work. They’ve eliminated the need for operators to manually dial all the numbers on their call lists. Not only does this save your team members from a tedious process, but dialing technologies allow your business phone system to be more productive by increasing workflow automation. The ask from the businesses is to improve the efficiency of agents by allowing them to make more outbound connections every day.
This feature is an enhancement to Progressive (1:1) dialer and will enable administrators to define the pacing mode upto 10 and also enable Call progress analysis for maximum outreach. This functionality is crucial for businesses aiming to actively engage with customers, address concerns, boost sales in an efficient manner.
For more information, see Configure Voice Outbound Campaign Modes in Webex Contact Center.
May 3, 2024
Outbound predictive campaign
Customers now have the option to implement more robust proactive outreach strategies leveraging predictive campaigns, which will help organizations connect with their end customers in a more timely and effective manner.
Predictive campaigns offer a much higher level of efficiency, and their benefits encompass lead generation, collections, and customer service. A predictive dialer will offer benefits such as filtering out busy signals, disconnected numbers, answering machine detection, and voicemails, ensuring that agents only connect with live agents. Predictive campaigns will give you the ability to define the minimum and maximum dialing rate so that the system can dial out the number of calls based on the abandoned rate configured. This feature will help administrators define predictive dialer parameters and conduct call progress analysis to manage outbound campaigns efficiently.
For more information, see Configure Voice Outbound Campaign Modes in Webex Contact Center.
May 1, 2024
Subflows in Flow Designer
Flow developers can build subflows for independent logical functionalities and reuse them across multiple main flows. This makes it easy to build and manage large complex flows with ease. It also helps flow developers to collaborate more effectively with different teams independently developing subflows.
For more information about how to create and manage subflows, see Subflows in Flow Designer.
April 30, 2024
Enforce role-based access controls for Flow Designer
Administrators can enforce View and Edit access controls for Flow Designer centrally on the User Profile level on Control Hub.
Also, flows can now open in read-only mode by default, preventing unintentional changes. Users with Edit access on the User profile will be able to toggle Edit mode and make changes to flows.
April 29, 2024
Partner to Partner (P2P) transfer support
Partner (P2P) transfer feature is now available for Flex and Flex 3.0. This feature allows partners to move a customer's subscription to a new partner. For more information on how to initiate a subscription transfer, see help document.
Customers using Webex Contact Center 1.0 must upgrade to the latest version of Webex Contact Center to use P2P feature.
April 18, 2024
Improvements to Webex Contact Center Self-Service Trials
Webex Contact Center is making the following improvements so that it can scale the trials to more partners and provide better support:
- Comprehensive documentation on what's supported versus what's not in a trial and whom to reach out to for support
- Contact Center AI Customer Experience (CCAI CX) is now available for trials
- Minor experience updates were made to trial provisioning flow
April 5, 2024
Support internal extensions as customized ANI
Automatic number identification (ANI) is a technology used in contact centers to verify the caller. ANI identification becomes very important for use cases while reaching out to customers for follow ups or agents reaching out backend staff such as non-agents, Knowledge workers, and SMEs for consulting. This feature makes sure that there are less number of rejection of calls by the backend staff. This feature will help the flow developers to configure the flow and decide the ANI customization for an Internal call. For more information, see Set Caller ID.
Admin Experience
This feature will help the admins to define the backend staff who are eligible to see the agent extensions.
Flow Experience
This feature will help the flow developers to configure the flow and decide the ANI customization for an Internal call.
March 26, 2024
Webex Contact Center launch in Singapore data center
Webex Contact Center services is now launched from a brand new data center located in Singapore. You will now have the option to choose Singapore as your country of operation. This will enable you to provision your tenant directly in the Singapore data center. It will provide dedicated Media Pops based out of Singapore, making it ideal for our valued customers in the region requiring voice media services.
For more information, see Data Locality in Webex Contact Center.
March 13, 2024
Introducing the Actions Widget for Microsoft Dynamics and ServiceNow connectors
The new Actions Widget in Microsoft Dynamics and ServiceNow connectors empowers your agents during voice interactions. Enhance workflow efficiency by providing quick access to actions like View/Edit Activity Record, Associate to Activity Record, Create Case, and Live Case Notes.
March 13, 2024
Streamlined Data Entry – Microsoft Dynamics
You can easily set up variable mappings between Microsoft Dynamics and Webex Contact Center. In a no-record match scenario during screen-pop, agents will receive a pre-populated contact form, eliminating manual data entry.
March 13, 2024
Consult or transfer voice calls to experts within your Microsoft Teams organization with Presence lookup
You can configure Microsoft Teams experts lookup for your agents who need to consult or transfer a voice call to experts, ensuring efficient call transfers and consultations. This directory lists experts with information such as presence, job title, department, and business phone, ensuring that agents can search and choose the right expert for the call.
March 11, 2024
Set Contact Priority
Digital contact prioritization enables flow designers to assign priority to inbound digital contacts in a queue. Flow designers can use the Queue Node to assign a priority to a contact. When an agent services multiple queues, the contact with the highest priority across all queues of the same media type is assigned to the agent. If two or more contacts across multiple queues (same media type) have the same (highest) priority, the contact waiting for the longest duration is assigned first to the agent.
Priority ranges from minimum 10 (default priority) to maximum 1.
For more information, see Implement skills-based routing and contact priority for digital channels section in Set up digital channels in Webex Contact Center article.
March 5, 2024
Contact Center admins can search channels by Dial Number (DN) in Control Hub
Admins can now search for Channels in Control Hub by entering partial or full Dial Numbers in the search bar. Note that partial search requires, at the minimum, three characters to produce results.
March 5, 2024
TLS 1.3 Support for Webex Contact Center
Webex Contact Center now works with both TLS 1.3 and TLS 1.2. This new feature mainly works on our cloud load balancers. Therefore, microservices or applications that use the load balancer don't need to change anything. Now, any external clients that use TLS 1.3 or TLS 1.2 can use the service.
February 29, 2024
Agent & IVR license Usage on Control Hub’s Contact Center Landing Page
This feature is currently only in the US, UK, and EU regions.
Introducing the newly improved License Current Usage Card on Control Hub’s Contact Center Landing Page.
This card allows Administrators, and anyone with access to the Contact Center Landing Page to select to see the amount of Premium and Standard Agent Licenses, or the IVR license usage that their Subscription has used during the Current Billing Cycle.
It indicates what the billing cycle is, how many Licenses they purchased, and if they are over or under on their allowed amount.
February 26, 2024
Support for Webex Contact Center CRM Connector in ServiceNow's Vancouver Edition
The Webex Contact Center ServiceNow Connector is now available for installation in your Vancouver edition from the ServiceNow store. This means you can easily integrate and enable your agents manage customer interactions, enhancing the overall efficiency and effectiveness of your contact center operations.
For more information, see Integrate Webex Contact Center with ServiceNow.
February 26, 2024
Record caller utterance
This feature allows the customers to effortlessly capture end-caller utterances during an IVR interaction and refer to the recorded utterances as part of their flow at a later point.
With this feature, you can create a more engaging and user-centric IVR experience by leveraging it for playing custom prompts or personalized greetings and many more use cases.
For more information, see Record activity.
February 22, 2024
Barging in on a call
With the new Barge-In feature, you can configure permissions for supervisors to join an ongoing call between an agent and a customer. It's all about empowering your supervisors with real-time intervention, ensuring the highest level of customer service, and providing a learning experience for your agents.
For more information, see Desktop Experience table in Manage User Profiles article.
February 13, 2024
Search API
Search API will give you a GraphQL endpoint to extract the exact dataset you need. This means easier reporting and deeper insights for you, and no impact on your current workflow.
For more information, see https://developer.webex-cx.com/documentation/search.
February 13, 2024
New On-hold Music Available for Contact Center
New on-hold music is available for your Webex Contact Center tenant. For new customers, this new audio file will be the default on-hold music when creating your tenant. The old on-hold music will also be available for use. For existing customers interested in using the new on-hold music, please contact your Customer Support Manager (CSM) or Partner Support Manager (PSM) to retrieve the audio file.
February 13, 2024
Copying Webex Contact Center Settings
Admins can now copy an existing Contact Center setting directly in Control Hub (e.g. copying an existing Multimedia Profile) by selecting the copy option icon next to the setting. When attempting to copy, the admin will be brought to the setting creation screen with the copied setting details already entered. The admin can then edit the details of this new setting entry as they see fit.
February 6, 2024
Apply version labels to a flow
Webex Contact Center supports the creation of flow environment version labels that can be associated with Entry Point mappings. This feature provides the flexibility for flow developers to attach a version label to a specific flow, instead of the default Latest version. This enables flow developers to develop and test new flow enhancements without impacting production calls.
When you publish a flow, you can associate a version label such as Live, Test, or Dev with the new flow version in addition to the flow name. Existing flows in the system will be marked with the Live version label. Latest is the default version label that you can't remove from a flow version during publishing.
For more information, see Apply version labels to a flow.
January 31, 2024
Digital channels anti-malware capabilities
Malware scan for digital channels is now available on Webex Contact Center.
Webex Contact Center digital channels is now equipped with anti-malware capabilities that scans all incoming and outgoing attachments for virus and malware signatures. This offers additional protection to the cloud and reassures the safety and stability of the Contact Center service to our customers.
Please update your digital channel Webex Connect flows to take advantage of the additional messaging that can be provided upon malware detection. Migration documents and upgraded sample template flows are available in Github.
For more information, see Setup digital channels in Webex Contact Center help article.
January 30, 2024
Virtual Agent - Voice with Dialogflow ES
Webex Contact Center is offering an enhanced integration experience for the Dialogflow ES feature. This feature is exclusively available to customers whose tenants have been upgraded to an enhanced media platform. Using this, they can enjoy a smooth and standardized onboarding process for our Contact Center AI (CCAI) services using our state-of-the-art Control Hub and the cloud-based Google CCAI connector.
Control hub administrators would now have the capability to provision the Dialogflow ES Virtual Agent feature using the conversational profile and Google CCAI Connector. With the config ID generated and the corresponding mapping to the Virtual Agent activity, flow developers can efficiently guide the IVR flow and make the most of AI services.
For more information, see Configure Virtual Agent-Voice in Webex Contact Center.
January 30, 2024
Recording of consult calls
Cisco Webex Contact Center is introducing the recording of consult calls. When an agent requires assistance during a live call and consults other agents, the conversations between the agents are recorded. This enhancement supports four consult call types - agent to agent, agent to queue, agent to dial number, and agent to entry point mapped to a dial number. This feature enables the supervisor to revalidate the advice provided to the agent and provide relevant coaching to improve the overall performance of the agent. Consult call recordings are created as child files to the main recording and follow the call recording configuration.
This feature is available only for Next Generation media platform customers and available only on the Recording Management portal.
January 30, 2024
Enhancement of Captures API to include consult call recordings
During a live call, when an agent consults with another agent or queueor dialed number, or an entry point mapped to a dialed number, Webex Contact Center enables the recording of consult calls. These consult call recordings are automatically available through the Captures API, as long as the customer call recording is enabled. It does not require any new configuration.
These agent consult call recordings facilitate quality management for the supervisor. It enables WFO providers like Calabrio or Verint to extract the consultation recordings and reproduce them in their respective dashboards for customer consumption.
For more information, see Manage call recording schedules help article.
January 30, 2024
Recording silence when caller is placed on hold
During an active call, when a caller is placed on hold by an agent, the caller listens to music or informational/promotional announcements. The generated media file records music (or announcements) during hold time. This enhancement of recording silence provides the tenants with an option to enable or disable recording silence during hold time.
By default, the generated media file records silence.
This feature is available for all Next Generation voice media platform customers.
January 30, 2024
Update tenant timezone in Control Hub
Webex Contact Center administrators can now change the timezone of their tenant directly in Control Hub. This timezone change only impacts your voice channels and doesn't apply for digital channels. For instructions on how to alter the timezone in the Control Hub, see Tenant Settings help article.
January 23, 2024
Simplify metrics and align definitions for 'Total Handled' and 'Total Abandoned' Calls between Supervisor Desktop and Analyzer
Understanding 'Total Handled' and 'Total Abandoned' calls just got simpler. We've aligned these metric definitions between the Supervisor Desktop and Analyzer for a seamless experience. You can now review the updated definitions in the View your contact center KPI cards article.
January 18, 2024
Create reports with specific time spans
With the introduction of the new Timepicker feature, Contact Center Reporting and Analytics (Analyzer) enables users to create both stock and custom reports for a specific time span. This facilitates quick and efficient report creation, ensuring a seamless review process for operational decision-making and improving overall customer experience.
For more information, see Timepicker.
January 16, 2024
Background Noise Removal for Contact Center Agents
Webex Contact Center introduces the removal of background noise arising from customers during a conversation. Agents receive calls from customers through PSTN-based devices from different environments. Excessive background noise makes it difficult for agents to understand the conversation. The background noise removal technology based on advanced deep learning, speech science, and audio processing methods resolves this issue. When a voice media stream is received from a customer, the AI noise removal technology separates and removes background noise from human speech.
This feature is available for Flex 3 premium agents on Webex Contact Centers with regional media support on the Next Generation media platform. For more information, see Audio Problems section in the Setup and Administration Guide.
For metrics related to the application of background noise reduction per entry point in inbound calls, see Noise Reduction Duration by Entry Point.
January 16, 2024
Publish Partner built Webex Contact Center Solutions on Webex App Hub
Developer Partners bringing a solution to the Webex Contact Center can promote their solution in the Webex Marketplace - the Webex App Hub. Partners can showcase the solutions they've built by including relevant marketing materials like screenshots and videos. Link to the partners' websites, payment portals, and support pages are other useful links for customers.
Developers can simply create an integration on the Webex Contact Center Developer Portal, fill out a submission form, and get the integration certified and promoted to Webex App Hub. For more information, refer Developer portal.
January 16, 2024
Increase in count of Google Connectors
With this update, customers can provision up to ten Google connectors. This enhancement provides increased flexibility and functionality for managing Google-related connections. For more information, see Configure Google connector for Webex Contact Center.
January 11, 2024
Agent & IVR license Usage on Control Hub’s Contact Center Landing Page
This feature is currently only in the US and UK regions.
Introducing the newly improved License Current Usage Card on Control Hub’s Contact Center Landing Page.
This card allows Administrators, and anyone with access to the Contact Center Landing Page to select to see the amount of Premium and Standard Agent Licenses, or the IVR license usage that their Subscription has used during the Current Billing Cycle.
It indicates what the billing cycle is, how many Licenses they purchased, and if they are over or under on their allowed amount.
December 19, 2023
Call recordings review and playback
Supervisor Desktop is now available with a dedicated Post Interaction Insights widget. This widget:
-
provides comprehensive insights and feedback on post-interaction activities.
-
helps supervisors to better manage their teams and enhance customer service delivery.
This widget includes the following features:
-
Review Call Recordings: Supervisors can access and review all the call recordings handled by their team members.
-
Playback Call Recordings: Supervisors can playback these recordings for detailed analysis and training.
For more information, see Supervise your agents and teams and Module Settings.
December 19, 2023
Enhancement of Captures API to support Digital Channels
The Captures API has been enhanced to fetch transcripts of Digital Channel contacts. Please visit the Dev Portal for more information.
Digital Channel contact transcript covers all supported channels. The transcript can be fetched as a JSON file.
Captures API should be used in conjunction with the Search API.
December 19, 2023
Webex Contact Center Digital Channels support for Japan Data Center
The Webex Contact Center Digital Channels capability is available in the Japan data center to cover Japan, South Korea, and Taiwan.
Customers in the region can reach out to their Account Managers or Customer Success Managers.
December 15, 2023
Experience Management Interactive Voice Response Surveys
Introducing the ability for Webex Contact Center to understand the Voice of Customers through Interactive Voice Response (IVR) surveys. Now, you have the capability to evaluate the experience of your end users at any point during a call concerning their interaction with your contact center. To get started, create an IVR survey using the Survey Builder in Control Hub. Once the survey is built, integrate it seamlessly using Flow Designer of Webex Contact Center. Access and download the survey results conveniently from the Survey Builder in Control Hub.
At present, this feature is exclusively accessible in the United States and is specifically supported on the Next Generation Media Platform (RTMS). IVR surveys mark the debut feature of Experience Management, with ongoing developments on the horizon, so stay tuned for exciting enhancements.
For more information, see Experience Management - Interactive Voice Response Surveys for Webex Contact Center.
November 28, 2023
Percentage Allocation to manage call load distribution
Flow Designer will introduce the Percentage Allocation activity that will enable flow developers to specify the percent allocation of calls to different branches in a flow. This will enable multiple use cases requiring varying call load distribution such as call traffic allocation to different queues, virtual agent experience, post-call surveys, and so on. For more information, see Percentage Allocation.
November 24, 2023
Agent license current usage card-UK
This service is available for customers in regions serviced by UK data centers. It complements the service that is already provided by our U.S. data centers.
Introducing the new Agent License Current Usage Card on Control Hub's Contact Center Landing Page. This card allows Administrators, and anyone with access to the Contact Center Landing Page to see the amount of Premium and Standard Agent Licenses that their subscription has used during the Current Billing Cycle.It indicates what the billing cycle is, how many licenses they purchased, and if they are over or under their allowed amount.
November 14, 2023
Introducing the Analyzer Beta
The Analyzer Beta is now available globally and allows Webex Contact Center customers to experience next-gen Reporting and Analytics. The Analyzer Beta provides simplified user workflows, robust data integrity, accuracy, and reliability. It includes an enhanced Analyzer Landing Page, Stock Historical Dashboard optimizations, and access to Transition Reports.
For more information, see Get started with the Analyzer Beta.
October 31, 2023
Global rollouts of CCAI and Regionalised media support for Virtual Agent-Voice with Dialogflow CX
Dialogflow CX is now available in all global regions with our Next Generation media platform (RTMS). Additionally, webex contact center customers can use the regionalised media feature with Dialogflow CX to ensure that the media is sent to the closest Google Data Center depending on the configured PSTN region for reduced latencies and improved customer experience.
For more information, see the Configure regional media for Virtual Agent-Voice and Configure Virtual Agent-Voice in Webex Contact Center articles.
October 30, 2023
Webex Help Center for Agent Desktop
Webex Help Center replaces the online help system for Agent Desktop. Agents now get directed to the newly integrated Webex Help Center. Webex Help Center ensures that agents can navigate through categorized help articles, making information discovery simpler and more efficient. Webex Help Center provides faster and accurate search results. Agents receive timely notifications about relevant content updates.
October 27, 2023
Allow overlapping overrides
In Webex Contact Center existing routing strategies, you can configure non default routing strategies created for the same timespan to override the default routing strategy.
With this feature enhancement, WXCC enables you to create multiple overrides to overlap and you can mark only one of them as active at any given time. For more information, see Set up business hours for Webex Contact Center.
October 27, 2023
User Management, Desktop Experience, and Customer Experience settings available on Control Hub
As part of an ongoing initiative to consolidate Contact Center admin functions, User Management, Desktop Experience, and Customer Experience related settings, configurations, and features are now available in Control Hub.
User Management
Desktop Experience
Customer Experience
October 25, 2023
Developer Sandbox support in Next Generation platform (RTMS)
The developer sandbox now supports Next Generation platform (RTMS). Every sandbox organization that is provisioned in the developer portal will be on the Next Generation platform (RTMS). Developers are welcome to provision a sandbox organization to test the latest features.
To get your sandbox, go to https://developer.webex-cx.com/sandbox/.
October 25, 2023
Outdial ANI in Developer Sandbox
Developer Sandbox will now auto-provision outbound call configurations for all the newer sandbox requests made on the Webex Contact Center Developer Portal: https://developer.webex-cx.com/sandbox.
You can manually create these configurations for the existing sandboxes.
October 25, 2023
Transition Reports for all users
Contact Center Reporting and Analytics (Analyzer) will now provide Transition Reports without a feature flag. All users will have access to these reports. You don't need to create ad-hoc requests with the Solutions Assurance team for enabling these reports. Transition Reports include:
-
Abandoned Call Detail Activity Report
-
Agent Call Summary Report
-
Agent Detail Report
-
Agent Summary Report
-
Application Summary Report
-
CSQ Activity Report by Window Duration
-
CSQ Agent Summary Report
-
CSQ All Fields Report
-
Multichannel Agent Summary
For more information, see Transition Reports.
October 20, 2023
Agent license current usage card
This feature is in Limited Availability (LA) only in the US region.
Introducing the new Agent License Current Usage Card on Control Hub's Contact Center landing page. This card allows administrators and users with access to the Contact Center landing page to see the license usage. The usage shows the amount of Premium and Standard Agent Licenses their subscription has used during the current billing cycle.
It also indicates what the billing cycle is, how many licenses they purchased, and if they are over or under their allowed amount.
Webex Calling support for Next Generation media platform (RTMS) - Singapore
Webex Contact Center supports Webex Calling with our Next Generation media platform (RTMS). This service is available for new customers in the Singapore region. It complements the service that is already provided by our Japan, Australia, Canada, U.S., UK, and EU data centers.
October 17, 2023
Salesforce CRM Connector – Recording Playback
The Salesforce CRM connector will now support the playback of call recordings inside the Webex Contact Center embedded desktop Connector for the Salesforce CRM.
With this feature, users with a supervisor or administrator profile can play back call recordings inside Salesforce without having to exit the CRM console.
Users must have profiles that contain read access to the Recording Management module in the Control Hub portal.
For more information, see Configure recording playback.
October 12, 2023
Embed Agent Desktop and Supervisor Desktop inside MS Teams
Agents and supervisors can access their Desktop within Microsoft Teams for a unified experience and enhanced productivity. For instructions, see Access Webex Contact Center Desktop inside Microsoft Teams.
October 11, 2023
Partner to Partner (P2P) transfer
With this enhancement Webex Contact Center now supports the Partner to Partner (P2P) subscription transfer feature. This allows customers to move their subscription from their existing partner to a new partner. To know how to transfer a subscription, see Partner To Partner transfer of Webex Contact Center subscription article.
Note: The P2P subscription transfer feature is available only on A-Flex-CC subscription of the Webex Contact Center platform. Customers using Webex Contact Center 1.0 must upgrade to the Webex Contact Center platform, and then raise a request for partner to partner subscription transfer. P2P support for A-FLEX-3-CC is work in progress and will be announced in some time.
October 04, 2023
Change Agent State
Supervisors can manage operations, meet contact center performance and SLAs, and provide help and support to agents.
Supervisors can select an agent in the Team Performance widget and change the agent’s state to a desired state. Optionally, they can add a reason for the state change.
The Team Performance Widget displays agents for which the supervisors force changed the state. Supervisors can create custom reports to track these changes. Agents are notified of the state changes done by the supervisor.
For more information, see:
September 26, 2023
This feature is available only for Next Generation media platform customers and available only on the Recording Management portal.
September 14, 2023
Support for 5000 concurrent agents for Next Generation platform
With this enhancement, Webex Contact Center now supports a maximum of 5,000 concurrent logged in agents per tenant. To support this enhanced agent capacity, the updated configuration limits are documented in System Limits in Webex Contact Center. This enhancement is only applicable to tenants provisioned with the Next Generation platform for voice. For more information, see System Limits in Webex Contact Center.
Contact Center now enforces the maximum number of configurations as documented in System Limits in Webex Contact Center for both Classic and Next Generation platforms. Existing customers who have usage higher than documented values have been provided an exception. Cisco will work with such customers to bring them within configuration limits.
September 14, 2023
Supervisor access to Control Hub
With this enhancement, contact center supervisors can access Control Hub and Business Hours. In future, other administrative configurations will also be available to supervisors on Control Hub. This feature also introduces user profile level access control for tenant settings.
For more information on Supervisor privileges, see Webex Contact Center Administrator Roles and Privileges.
September 6, 2023
Webex Calling support for Next Generation media platform (RTMS) – UK and EU
Webex Contact Center supports Webex Calling with our Next Generation media platform (RTMS). This service is available for new customers in regions serviced by UK and EU data centers. It complements the service that is already provided by our Japan, Australia, Canada, and U.S data centers.
For more information, see the article Next Generation voice media platform.
August 25, 2023
Deprecation of in-app help in Agent Desktop
As part of our continuous efforts to improve the agent experience, we are deprecating the in-app help that is displayed in a modal in the agent desktop. Instead, agents will be redirected to the web-based user guide when they click the help icon.
August 22, 2023
Outbound Dialer–Progressive mode (1:1 Mapping)
This feature is in Limited Availability (LA). We’ll enable this feature for a customer only after the necessary review and agreement. To enable a feature in limited availability, please contact your Partner, Customer Success Manager, or Cisco support.
Outbound campaigns are a perfect medium to build brand awareness, convert a target audience to loyal customers, and proactively improve the customer experience. Prospects and customers expect businesses to provide fast, timely, and valuable customer support. To accomplish this, businesses must plan for a contact center outbound strategy that meets the business and compliance requirements. Webex Contact Center supports preview dialing mode and will introduce Progressive mode through integration with Acqueon. Campaign Manager is an additional SKU to be purchased with agent license to consume this feature.
This feature will include:
-
Progressive mode (1:1 dialing mode)
-
Compliance and Do Not Call (DNC) list management for Progressive Campaign
-
Campaign reports
-
Customer contact popover widget
-
Blended agent support (incoming interactions prioritized)
August 11, 2023
Salesforce CRM Connector Enhancements
The Salesforce CRM connector is enhanced with these capabilities:
-
Enhanced Field Mapping: We have increased the limit for mapping Salesforce object fields with Webex Contact Center variables. This enhancement enables seamless exchange of bulk data between Webex Contact Center and Salesforce.
-
Activity Ownership Transfer: Agents can now transfer the ownership of call activities to other agents. This functionality ensures better collaboration among agents and provides better call management capabilities.
-
Open Activity Record in Edit Mode: The system automatically creates Activity records and initiates them in Edit mode.
For more information, see the article Integrate Webex Contact Center with Salesforce.
August 01, 2023
Webex Calling support for Next Generation media platform (RTMS)
Webex Contact Center supports Webex Calling with our next generation media platform (RTMS). This service is now available for new customers in regions serviced by our Japan, Australia, US, and Canada data centers. This enables new customers in these regions to use Webex Calling hosted agents with Webex Calling PSTN options (Cloud Connect/Local Gateway). Also, the next generation media platform (RTMS) allows customers to leverage new features like regional media optimization. For more information on the global availability of our next generation media platform, refer to Next Generation media platform.
August 01, 2023
Webex Contact Center launch in Canada data center
Webex Contact Center services are now available from our new Canada-based data center. During the onboarding process, customers can select the country of operation that maps to the Canada data center to provision their tenant. Canadian Webex Contact Center customers can integrate directly with the Webex Calling service or via SIP trunk access to dedicated VPOPs based in Canada.
For more information, see Data Locality in Webex Contact Center and Services Setup Wizard.
July 18, 2023
Agent profiles changed to Desktop profiles
As part of the upcoming changes, the Agent Profiles tab in the Provisioning module of the Management Portal is renamed to Desktop Profiles.
For more information, see Bulk Operations in Webex Contact Center and CSV definition for bulk operations in Webex Contact Center.
July 18, 2023
Supervisor Desktop inactivity timeout
Administrators can specify an idle inactivity timeout for the supervisors who are signed in to the supervisor desktop. This prevents the supervisors from using licenses indefinitely and blocking the contact center resources.
For more information, see Respond to inactivity timer and Desktop Settings for Webex Contact Center.
July 11, 2023
Support for curved connector lines in Flow Designer
This feature enables a toggle between curved lines and straight lines for each flow. This feature enhances the overall aesthetics as curved lines make flows more intuitive. In complex flows where straight lines tend to overlap making it difficult to trace the connections, curved lines enhance the view of connectors between different activities. For more information, see Create and manage flows.
June 28, 2023
Search capability in Flow Designer
Search capability in Flow Designer enables flow developers to search for variables, activities, expressions, and so on easily and quickly within a flow. Also, this feature helps flow developers find and replace text inputs wherever required in the flow. For more information, see Search entities in a flow.
June 21, 2023
All New Supervisor Desktop
The Webex Contact Center Supervisor Desktop provides a holistic supervisor experience within a centralized interface.
It allows supervisors to manage, monitor, assess, guide, and assist agents. The administrator can customize the Supervisor Desktop with widgets to address specific Contact Center business needs.
The first set of features and capabilities include the following:
Role-based Sign in: Supervisors can choose to sign into the Desktop as a dedicated supervisor or in a dual role as a supervisor and agent. Administrators can configure role-based access for supervisors.
Administrators can configure role-based access for supervisors.
-
Home Page for Supervisors: Supervisors can track contact center KPIs and metrics in real-time from the Supervisor Desktop Home page.
Team Performance Widget: Supervisors can obtain a 360° view of real-time agent information across teams and perform specific supervisory actions through the Team Performance Widget.
Mid-Call Monitoring: Supervisors can select an agent in the Team Performance widget and choose to monitor an ongoing voice call midway between the agent and customer.
Send 1:1 message to agents (Powered by Webex): Supervisors can select an agent in the Team Performance Widget and quickly guide that agent through a 1:1 message.
Send broadcast message to a team of agents (Powered by Webex): Supervisors can send contextual information to a team of agents through a broadcast message using the Webex app within the Desktop.
Customizable Desktop Layout: Administrators can now control desktop features for supervisors through Desktop layouts. The Supervisor Desktop can be enriched with custom widgets to meet specific contact center requirements.
For more information, see the articles listed under Supervisor. For known issues in Supervisor Desktop, see Known Issues.
June 21, 2023
Enhanced access control for Webex Contact Center user profiles
With this enhancement, user profiles can control access to contact center features such as agent profiles, skills, skill profiles, work types, aux codes, address books, outdial ANI, global variables, desktop layout, and multimedia profiles. The existing administrator and supervisor profiles can have access to these features. Going forward, customers can create custom profiles to restrict access to any of these features. For more information, see Module Settings.
June 9, 2023
Support for Virtual Agent Voice with Dialogflow CX in additional data centers
This feature is in opt-in limited availability (LA). We'll enable this feature for customers only after the necessary review and agreement. To enable this feature in opt-in limited availability, contact your Partner, Customer Success Manager, or Cisco support.
Webex CCAI is now co-located with the Next Generation platform and rolled out in other data centers extending the Virtual Agent Voice feature (Google Dialogflow CX) with Next Generation platform to the UK, EU, Japan, and Australia in addition to the US.
Regionalized media support and rollout of Webex CCAI in additional data centers (Singapore and Mumbai) are currently in progress.
For more information, see Virtual Agent-Voice in Webex Contact Center.
June 6, 2023
A new consolidated Webex Contact Center administrator experience in Control Hub
Webex Contact Center is consolidating all administrative configurations in Control Hub. With this enhancement, Webex Contact Center provides helpful resources and quick links that you can leverage to access the breadth of our Webex Contact Center suite.
You can now easily navigate Webex Contact Center tenant settings through the new left navigation bar in Control Hub:
-
General settings
-
Security
-
Voice
-
Digital
-
Desktop
-
Integrations
-
Addons
-
Bulk Operations
You can access your Business Hours in the left navigation to configure your working hours, holiday lists, and overrides.
New Contact Center administrator experience in Control Hub
For more information, see Tenant Settings and Business Hours.
June 6, 2023
Consent-based recording
Some regions require businesses to inform their callers that the call is being recorded for training and quality assurance. To address this, Webex Contact Center introduces consent-based recording for voice call recordings. This feature seeks caller’s input/consent before continuing to record the voice call. Based on the caller’s consent, the system enables/disables recording of the voice call before the agent starts a conversation with the caller.
Consent-based recording feature is a configurable activity that can be enabled/disabled in Flow Designer at the tenant/queue level. The caller’s consent can then be retrieved from Analyzer for further reporting/quality assurance analysis. For more information, see Recording Control.
June 6, 2023
Callback-retry attempts to customer
A successful callback request will lead to positive customer satisfaction (CSAT) score, while an unsuccessful callback request leads to a negative CSAT score. One of the prime reasons for an unsuccessful callback request is that customers aren’t reachable or busy at callback time.
With this feature, flow designers will now be able to:
-
Connfigure the callback retries, if the first callback attempt is unsuccessful.
-
Configure a delay timer between the callback requests.
For more information, see CallbackFailed.
June 6, 2023
Customize ANI for different call scenarios
Automatic Number Identification (ANI) is a feature for telecommunication networks to allow telephone users to identify the contacts being dialed. ANI feature provides the phone call recipient with the caller’s phone number. The technology and method used to provide the information depends on the service provider. There are scenarios where the system sends a default ANI to the call recipient which leads to the customer disconnecting the calls as the number is not identified by them. This feature will help the flow developer define the ANI in Flow Control which can be sent to the service provider. This feature is developed considering the legal scenario to not display any random numbers that are not associated with the contact center.
These scenarios are covered as part of this feature:
-
Inbound Call
-
Outbound Call
-
Transfer/Consult
-
Courtesy Callback
-
Preview Outbound Campaign
For more information, see Set Caller ID.
June 6, 2023
Change Dial Number or Extension without Signing out of the Desktop
With the new Profile Settings option in Agent Desktop, agents will be able to easily select and personalize their preferred dial number or extension and switch between teams without the need to sign out and sign back in. This streamlined process will enable agents to handle telephony or team changes seamlessly, without any disruptions to their workflow.
May 23, 2023
Empowering you with Customer Journey Data Services
This feature is in Limited Availability (LA) US-only. We’ll enable the feature for a customer only after the necessary review and agreement. To enable the feature in limited availability, please see Journey - Getting Started.
Customer Journey Data service (CJDS) is a next-generation customer journey management service empowering organizations to go from Data to Insights to Action. CJDS enables businesses to capture customer journeys across any channels/application, identify insights and take real-time actions to provide an excellent customer experience.
With CJDS, customers can access our APIs that focus on key aspects of the customer journey.
-
Listen: Integrate with any data source or third-party applications to listen to disparate data sources.
-
Identify: Create a dynamic customer profile capturing propensity drivers.
-
Analyze: Apply different aggregation techniques to all customer data collected.
-
Act: Use the data/insights within CJDS to dynamically change the flow within Webex Contact Center Flow Control and personalize the customer experience at a granular level. These insights are visible to customer-facing teams in real time through Agent Desktop via the journey widget.
For more information, see Journey - API documentation.
May 17, 2023
Simplified flows to replace old complex digital channel flows
The original flows provided for digital channels integration with Webex Contact Center were somewhat complex. The simplified flows replace the old flows with new and much simpler configurations that help our partners and customers to focus on developing the business logic.
The simplification entails to start a flow with the customary channel specific Incoming Message node, Evaluate node to extract correct fields, followed by Resolve Conversation node that provide clean paths to add business logic for a new interaction.
Old complex flow
New simplified flow
The old complex flows that are currently deployed will continue to work for some time in a deprecated state. Any customer who wishes to deploy new flows will need to add logic to the old shared flows to limit their execution to the old assets only. For more information, see Configure flows for digital channels.
May 02, 2023
Workflows in outdial entry points
Modern businesses have a proactive outreach to convey information, provide customer support, and reduce customer churn. Omnichannel outbound calls provide human interface to businesses leading to better customer experience. Flow developers need flexibility to design and configure outbound communication.
With this enhancement, the following features are supported:
-
Workflows as part of the call control functionality for outdial entry points.
-
Flow control activities as part of the workflow for outbound calls.
-
HTTP Request
-
Condition
-
Parse
-
Set Variable
-
Business Hours
-
End Flow
-
Screen Pop
-
PreDial event
For more information, see Support for workflows in Outdial Entry Point.
April 25, 2023
MS Dynamics CRM Connector – Support for CIFv2
With this enhancement, Microsoft Dynamics 365 connector will be upgraded to support full compatibility with the latest Channel Integration Framework (CIF) 2.0 standard. With the addition of Dynamics 365 multisession app functionality, agents can experience a desktop embedded within the CRM tool's user interface, without disruption during their navigation.
For more information, see Integrate Webex Contact Center with Microsoft Dynamics 365.
April 18, 2023
Request for a Contact Center Sandbox
A Contact Center Developer Sandbox provides you with administrator access to a licensed Webex organization, with predefined Contact Center assets that allow a partner developer to create and test the capabilities of the Webex platform. You can request for a sandbox by sending an email to wxccdevsupport@webex.com. You'll receive 2 Cisco PSTN numbers, 1 administrator, 2 agents, teams, queues, and more.
After you receive the sandbox, place a call to an entry point, and see the call reflect on the Agent Desktop. For more information, see Webex Contact Center for Developers. Sign in to view the specific page content.
April 18, 2023
Developer support in the Webex Contact Center for Developers portal
Are you a Partner building an integration/solution for Webex Contact Center? Do you have questions or clarifications about Webex Contact Center APIs? Look no further and submit your questions to the developer support queue which is staffed with Webex Contact Center subject matter experts. Open a ticket on Webex Contact Center for Developers > Support.
April 11, 2023
Auto license template support for Contact Center
With this enhancement customers can configure auto license templates at organization or group level to assign contact center licenses to users in Control Hub. Auto license templates support assignment of standard and premium licenses. To learn more about this feature, see Set up automatic license assignments in Control Hub.
April 11, 2023
Webex Contact Center PSTN voice option on Next Generation platform
With this enhancement, customers who purchase the Webex Contact Center PSTN as part of their contact center subscription can onboard to the new Next Generation platform. The onboarding experience remains the same for customers. For more information, see Set up Voice Channel for Webex Contact Center.
This release does not support routing calls to Webex Calling based on-net endpoints.
April 6, 2023
Reduce costs with enhanced ServiceNow connector
With this enhancement, ServiceNow connector for Webex Contact Center is fully compliant with the OpenFrame API. The connector uses Standard Tables for storing activity records replacing the custom tables, resulting in reduced licensing costs. For more information, see Integrate Webex Contact Center with ServiceNow.
March 31, 2023
Microsoft Teams and Webex Contact Center Telephony Integration
Webex Contact Center Telephony Integration for Microsoft Teams combines powerful Contact Center capabilities with Microsoft Phone system. This integration paves the way for an easy interaction between Contact Center agents and the enterprise.
The following are the highlights of this integration:
-
Allows routing of skill-based inbound calls from Microsoft phone system to the Contact Center agents.
-
Supports both Microsoft PSTN and third-party direct routing providers.
-
Enables the agents to directly handle calls from the Microsoft Teams interface.
For more information, see the article Microsoft Teams and Webex Contact Center Telephony Integration.
March 31, 2023
Flow tracing
Flow tracing enables flow developers to get insights in the flow execution paths and easily troubleshoot the flows from within the flow designer console. This feature also enables flow developers to view flow path of activities for any interaction and access detailed activity level information to easily debug flows. For more information, see Flow Tracing.
March 30, 2023
Preferred agent callback
With this enhancement, flow developers can configure the callback to both the agent and the queue based on the agent ID or email ID. Callback activity must be used only after Queue Contact or Queue To Agent for registering callbacks. For more information, see Callback.
March 24, 2023
Partial Response in Virtual Agent - Voice
The partial response feature addresses a key aspect of the user experience by engaging a user during a call. It plays an interim message while the Webhook response takes time to process in the background.
For an AI application (Dialogflow CX) that requires multiple parameters, an API or Webhook request typically takes longer to receive the correct response. During the processing of an API request, an end user is kept completely silent. There is a possibility of the end-user hanging up the call. To prevent this, an interim response must be issued to inform the end customer that their request is still being processed.
This feature enables an AI bot developer to construct a static response that can be communicated back to the end user while their query is still in progress. In the CX bot agent, static messages can be configured for up to 30 seconds. Once the final API response is received, the flow can be continued.
This feature is supported only for the US data center deployment on the Next Generation platform.
For more information, see the Supported Integration section in the Virtual Agent–Voice (VAV) in Webex Contact Center article.
March 21, 2023
Support for Flex 3.0 offer based subscriptions
With this enhancement, customers who subscribe to Webex Contact Center using the new Flex 3 offer will automatically have access to basic digital channels (Chat and Email) using the standard agent license.
Additionally, customers who update to Flex 3 from the Flex or CJP legacy offers also get access to basic digital channels using the standard agent license. For more information, see General Settings for User Profiles and multimedia setting in the Module Settings section.
March 7, 2023
Zendesk CRM Connector - Automatic CRM field updates
The new enhancement to Zendesk connector enables agents to be more efficient by saving time with every interaction. It automatically prepopulates Webex Contact Center Call Associated Data (CAD variables) both local and global variables into the Zendesk ticket fields. You can customize the mapping between the CAD variables and CRM fields.
February 28, 2023
Upgrade tenants using vPOP bridge on Classic platform to Next Generation platform
Customers using Voice POP Bridge telephony on the Classic platform can upgrade to the new Next Generation platform. To enable the upgrade feature for your customer organization, contact Cisco Solution Assurance. For more information, see Upgrade from Classic platform to Next Generation platform.
February 26, 2023
Regional media support extended to additional regions
Webex Contact Center now extends support for regional media to London, Frankfurt, Mumbai and Singapore data centers. Regional media allows customer and agent media (audio and SIP signaling) to remain local to a geographic region regardless of where the Webex Contact Center tenant or home location resides. Keeping the media local to a region decreases latency, improves audio quality, and provides unique regionalized configurations for multinational deployments.
For example, if a Webex Contact Center tenant is located in the US region, US calls are hosted in the US, European calls in Europe and Asian calls in Asia. Only control signaling is sent from the media region to the business logic of the contact center in the US.
Regional media is available to customers using Webex Contact Centers that are provisioned with the Next Generation platform media handling.
February 22, 2023
Increased Contact limit for Address BookThe limit of maximum contacts per Address Book is increased from the current value of 150 to 6,000. Agents can select or search Contacts as usual from the Address Book on the Agent Desktop.
February 21, 2023
Virtual Agent Voice with Dialogflow CX
We have introduced the Virtual Agent Voice (VAV) feature to enhance self-service capability within IVR flow. The VAV feature provides speech-based conversational capability while integrating with Google Dialogflow platform.
The flow designer introduces Virtual Agent Voice activity. You can configure this activity to integrate with the Dialogflow CX bot. With this integration, the contact center allows callers to have a voice-based conversational experience along with DTMF or touchtone inputs. For more information, see the Virtual Agent–Voice (VAV) in Webex Contact Center article.
This feature is supported only for the US data center deployment on the Next Generation platform.
February 21, 2023
Custom events in Virtual Agent Voice with Dialogflow CX
Custom events and custom payload features will be introduced to provide a better end-user experience and control over a conversation while interacting with the Virtual Agent Voice – CX bot. The custom payload feature helps to send payload information from the Google CX application to the client side for processing. The custom event feature helps to select a particular event to be invoked under the CX application using the client-side API. For more information, see the Virtual Agent–Voice (VAV) in Webex Contact Center article.
This feature is supported only for the US data center deployment on the Next Generation platform.
February 13, 2023
Upgrade Webex Contact Center 1.0 vPOP to Next Generation platform
The Webex Contact Center 1.0 to Webex Contact Center upgrade allows you to use the Next Generation platform on Webex Contact Center.
The upgrade allows customers to use vPOP based voice option for Next Generation platform. Other PSTN options will be available on the Next Generation platform in future releases. For more information, see Upgrade from Webex Contact Center 1.0 to Webex Contact Center.
February 7, 2023
Enhance scheduling experience using Business Hours
Business Hours enables administrators to configure working and nonworking hours for your organization specific to your timezone. Nonworking hours include holidays and emergency off hours during which contact center service will be unavailable. With this feature, flow developers get more flexibility to define a single workflow per entry point to handle both working and nonworking hours by using the Business Hours activity. For more information, see Business Hours.
We recommend new customers to use Business Hours feature to assign a flow at entry point level. However, existing customers can still continue to use the Routing Strategy feature to connect to an entry point in a flow until it is decommissioned.
January 31, 2023
Customize ANI (Automatic Number Identification) for Courtesy Callback
This feature allows the customer to opt to receive a callback when all agents are busy. Administrators or flow developers can choose to customize the ANI for the customer call leg for courtesy callback.
With this enhancement, administrators or flow developers can select the Static ANI number (from the dropdown list of available Entry Point-Dial Numbers) or Variable ANI (variable defined as a valid E.164 number, with a valid Entry Point-Dial Number mapping) in the Courtesy Callback activity in Flow Designer.
For more information, see Callback.
January 25, 2023
Optimize flows with error handling paths
Flow designer brings in a mechanism to configure error handling paths to optimize the flow. This feature enables an error exit for every activity so that the failures can be handled gracefully as desired by the flow developer. Flow Designer informs the flow developers about the system and activity errors that occurred while configuring activities. If the flow encounters any errors other than these predefined errors, the flow takes the path defined in the Undefined Error node of that activity. This error node sets the error output path that the flow takes when there are undefined system errors during flow execution. Moreover, if there’s no error handling path configured for the activity, the flow uses the default path that is configured in the OnGlobalError event handler in the Event Flows tab. For more information, see Error Handling.
January 10, 2023
Customizable and responsive header in Agent DesktopWith this enhancement, administrators can customize the order, position, and visibility of the widgets and actions in the Agent Desktop header. Agents experience better header responsiveness across different screen sizes.
For more information, see advancedHeader.
21 December 2022
Salesforce CRM Connector enhancements
Integration of Webex Contact Center with the Salesforce CRM connector introduces the following new features:
-
Advanced screen-pop and auto-population of Customer Records: This feature allows dynamic matching of the customer records based on Caller Attributed Data (CAD) passed from the Flow Designer of the Webex Contact Center. With this enhancement, field mappings are introduced in the activity records and in creating a new case.
-
Omnichannel state synchronization: The connector synchronizes the Salesforce omnichannel state with the Webex Contact Center agent desktop presence status. With the enhancement, the exclusive channel modes allow agents to handle one interaction type at a time – either Salesforce omnichannel or voice channel in the Webex Contact Center.
-
Salesforce Actions widget: The connector supports a new Salesforce Actions widget for quick actions. This widget appears on the desktop when the agent is connected on voice interaction.
The following actions are available:
-
View/Edit Activity Record
-
Associate to Activity Record
-
Create Case
-
Live case notes
-
-
Dynamic status in the taskbar (Softphone widget): The widget taskbar in salesforce displays the dynamic status of the agent state and call transition states for Webex Contact Center – Available and Idle states including idle codes, and call state transitions, such as Incoming Call, Connected and Disconnected states. This enables the agents to view their live status on the taskbar without having to open the Webex Contact Center widget.
For more information, see Integrate Webex Contact Center with Salesforce.
20 December 2022
Changelog and subscription for Developer Portal changes
The Developer Portal for Webex Contact Center now has an API Changelog. You can subscribe to an RSS feed to get the latest information about API releases, updates and changes made to API contracts, downgrade of APIs and a lot more. This service delivers updates directly from Webex Contact Center Service Groups that are usually not included as a part of release notes.
20 December 2022
Agent Desktop APIs - Call Consult APIs
Webex Contact Center now offers an additional set of Agent Desktop APIs that allow partners and customers to set up their own Agent Desktop and create task activities. These Call Consult APIs are:
-
Available Agents API for Blind Transfer/Consult/Conference: Fetches the available list of agents who can be reached for consult, conference, or transfer.
-
Consult Transfer: An agent can initiate a consult task with another agent and transfer the call when required.
-
Reject/End Consult Request: Allows an agent to reject a consulting call request.
-
Accept Consult Request: Allows an agent to accept a consulting call request.
-
Consult Conference: Allows an agent to add an already consulting agent/dial number to the call with the customer, so that all three participants can be in a conference.
For more information, see Webex Contact Center for Developers. Sign in to view the specific page content.
13 December 2022
Automate provisioning using Administrator Configuration APIs
Exciting things are available from the Webex Contact Center Developer Portal team with the Configuration APIs. As a business, you can now automate provisioning for users and use key contact center features.
The administrator related APIs that are available are:
-
Users: Maintain user entities to store basic user-related information such as Name, Phone Number, Email ID, Location, etc.
-
User Profile: User Profile is an extension of user data that stores information such as user subscriptions, orders, rewards, preferences etc.
-
Desktop Layout: Create a Webex Contact Center Desktop layout to simplify and track the moving parts of a Contact Center administrator profile, and you get to customize it to fit your needs.
-
Global Variables: These variables are configurable and accessible in every facet of the Contact Center ecosystem.
-
Work Types: Set and track the work status of a call, such as, when a line is idle or if a call has been wrapped up. This helps you estimate when that line would be ready to accommodate the next call.
-
Audio Files: You can upload pre-recorded audio/music messages to use as part of your flow. For more information, visit the Webex Contact Center for Developers portal.
13 December 2022
Agent Desktop Enhancement: Connecting popover for a contact request
A connecting popover is used to inform an agent that a new contact request is in the process of being assigned. The connecting popover is followed by the incoming contact request for the agent to take action before the state change. The agent can’t sign out when a connecting popover appears on the Agent Desktop.
For more information, see Popover and Answer a Call.
01 December 2022
Support JSON object as a variable type in flow control
Flow developers can create custom variables of type JSON and use these variables in various activities such as HTTP Request, Parse and Set Variable. For example, in HTTP Request and Parse activities, you can extract data using JSON path filter expression and store it in JSON variable.
For more information, see Create Custom Variables in Flow Designer.
24 November 2022
New output variables in QueueToAgent activity
The QueueToAgent activity routes the contacts to the preferred agent directly. The following output variables are added to the QueueToAgent activity:
-
AgentState
-
AgentIdleCode
By configuring this activity, flow designers can get information about the following statuses in the Agentstate and AgentIdleCode output variables respectively:
-
AgentState: Idle and Available
-
AgentIdleCode: Meeting, Lunch, Coffee, Break and so on.
This enables flow designers to queue the contact to the same agent based on the idle codes configured in the Management portal. For idle codes such as lunch or meeting, flow designers will be able to direct the call to a queue or another agent. For more information, see Queue To Agent.
22 November 2022
Consult to dial number mapped to entry point
This feature is in Limited Availability (LA). We'll enable the feature for a customer only after necessary review and agreement. To enable a feature in limited availability, please contact your Partner or Customer Success Manager or Cisco support.
This feature allows an agent to initiate a consult call with another agent in another department through an entry point. The agent can choose the entry point that is mapped to the dial number from the Dial Number drop-down list of the Consult Request dialog box. With this enhancement, the Queue option in the Transfer Request dialog box lists only queues; the Dial Number option in the Consult Request dialog box lists all the entry points and address book numbers.
When a consult call is made to an entry point, the flow control manages this consult call session like a new call. Further, the flow control can assign new skills, play IVR music, and check business hours to place the consult call in the right queue.
08 November 2022
Agent Desktop API offering
Webex Contact Center now offers a set of Agent Desktop APIs that enables partners and customers to set up their own Agent Desktop with our current portfolio.
Desktop APIs:
-
Agent Login: Signs the agent into their Desktop and prevents duplicate sign-in if an active session already exists.
-
Agent Log out: Signs the agent out of their Desktop and can only be called when the WebSocket Secure (WSS) session has been successfully established.
-
Agent State Change: The agent can set a status to indicate their availability (Available, Idle, Busy etc.)
-
Reload: Allows the agent to receive all the contacts assigned to a particular agent and state.
Task or Call Control APIs:
-
Get Task: Retrieves open and closed call control tasks of an agent.
-
Create Task: Creates a successful task.
-
Accept Task: Enables the agent to accept either an inbound or an outbound request.
-
End Task: Ends an ongoing inbound or outbound request.
-
Hold Task: Places a task on hold when the agent is consulting.
-
Reject Task: Rejects a task, thus changing the agent's status to Available.
-
Transfer Task: Transfers a task or a chat to another agent.
-
Resume Task: Resumes a task that has been placed on hold.
Call Recording:
-
Pause Call Recording: Pauses call recording so that the agent does not record the user's Personal Identifiable Information (PII).
-
Resume Call Recording: Resumes call recording once the agent is ready to record again.
For more information, visit the Webex Contact Center for Developers portal.
03 November 2022
Secure Variables in Flow Control
As a flow developer, you can mark custom flow variables as Secure to prevent logging of Personally Identifiable Information (PII). You can also configure these Secure variables as agent viewable or editable to control the presentation of these variables on the Agent Desktop. For more information, see Secure Variables.
03 November 2022
Regional Media support through Real Time Media Service (RTMS) voice platform
Webex Contact Center supports regional media availability via RTMS. This feature allows customer media (audio and SIP signaling) to remain local in a geographic region regardless of where the Webex Contact Center tenant or its home location resides. Keeping the media local to a region decreases latency, improves audio quality, and provides unique regionalized media configurations for multi-national deployments. For example, the Webex Contact Center tenant is defined as a home region in the United States. When an inbound call arrives in a non-home region such as Sydney, Australia, the media services remain local to the Sydney, Australia region with only application control signalling backhauled to the United States home region. This feature is available for supported RTMS regions such as USA and Sydney with additional regions coming online in late 2022.
For more information, see Map an Entry Point.
03 November 2022
Webex Contact Center launch in Japan data center
Webex Contact Center services are now available from a new Japan-based data center. During the onboarding process, customers can select the country of operation that maps to the Japan data center to provision the tenant in the Japan data center. This data center provides access to dedicated VPOPs based out of Japan and benefits customers in APJC who require voice media services in this region. For more information, see the Services Setup Wizard and Data Locality in Webex Contact Center articles.
31 October 2022
Onboarding Partner as a Customer
Partners can now onboard a Webex Contact Center tenant to their own organization by selecting the I am a Customer option in the Order Setup Wizard in Control Hub.
Partners must note the following restrictions when provisioning the tenant to their own organization using Control Hub:
-
If the country of operation that is selected maps to the United States, United Kingdom, Germany, Australia, or Japan data centers, the partner must onboard the tenant to the Default Platform only. The partner must not select the Exception Platform. For more information on Webex Contact Center data centers, see the article Data Locality in Cisco Webex Contact Center.
-
If the country of operation that is selected maps to the Canada data center, then the partner must not have any existing customer tenants provisioned in that data center. The partner must first provision the tenant for their own use, and later start onboarding customer tenants. Don’t use this feature if a partner already has customer tenants.
28 October 2022
New and reimagined illustrations in Agent Desktop
The Agent Desktop displays enhanced and contextual illustrations that are consistent with the Webex product suite. As part of this change, a new default illustration is displayed on the landing page.
27 October 2022
Threshold alert enhancement
With this enhancement, email alerts generated for threshold breaches now include the updated time stamp and the tenant time zone. For more information, see Threshold Alerts in the Cisco Webex Contact Center Analyzer User Guide.
12 October 2022
Variables support for the digital channels
Webex Contact Center supports use of global variables and custom flow variables (local variables) while building flows for the digital channels. Global variables are defined in the Management Portal. Flow developers can use these variables within flows to set and pass values in the context of interactions handled in the contact center. If these variables are marked as agent-viewable and agent-editable, this feature enables agents to view and update values for these variables in the Agent Desktop during customer interaction. Additionally, you can mark global variables as reportable, whereby values are available in the Analyzer for custom reporting. All variables set in the main flow, such as global and local flow variables are also available for access in the shared flows.
For more information, see Variable support for digital channels.
4 October 2022
Agent Desktop enhancement—Set any navigation bar page as the landing page
A new property isDefaultLandingPage
is added to the Desktop Layout JSON file. This property allows the administrator to set any navigation bar page as the landing page when the agent signs in. The administrator can configure the landing page at the global level or team level via the Desktop Layout.
For more information, see Navigation (Custom Pages).
29 September 2022
Delete entities permanently in Webex Contact Center
Webex Contact Center administrative configurations can now be deleted permanently. This helps customers remove unwanted configurations, keep a lightweight configuration footprint, and improve application performance. Before deleting a configuration object permanently, you will need to mark it inactive. You can also periodically delete inactive objects using an automatic purge which is at a tenant level setting.
For more information, see Delete inactive objects permanently.
28 September 2022
Surge Protection: Maximum concurrent digital contacts for a tenant
This feature defines the maximum number of digital contacts that can be active on the customer tenant. The Maximum Concurrent Digital Contact Threshold indicates this value. When the tenant reaches the threshold, it rejects any new digital contacts until existing digital contacts disconnect to bring down the number of concurrent digital contacts below the threshold. The concurrent digital contacts in the contact center include Chat, Email, SMS, and Social Channels.
This feature is applicable for customers using Webex Connect.
The value of Maximum Concurrent Digital Contact Threshold is set to 30% higher than the concurrent digital contact entitlements:
Maximum Concurrent Digital Contact Threshold = Concurrent Digital Contact Entitlements * 1.3
The value of concurrent digital contact entitlements is based on the following formula:
Concurrent Digital Contact Entitlements = (Number of committed Standard Agent licenses + Number of committed Premium Agent licenses) x 2 x 15
For zero commitment orders, the default value of concurrent digital contact entitlements is:
100 x 15
Customers can raise a support request to adjust the Maximum Concurrent Digital Contact Threshold for your tenant. The maximum concurrent digital contact threshold cannot exceed 160,000.
For more information, see Concurrent Digital Contact Settings in the Cisco Webex Contact Center Setup and Administration Guide.
The Surge Protection Statistics report is available in the Analyzer. For more information, see Surge Protection Statistics in the Cisco Webex Contact Center Analyzer User Guide.
28 September 2022
Configure Variables displayed on popover and Interaction Control pane
Flow Designer allows flow developers to select the system, global, and local variables that need to be displayed on the voice call request popover and Interaction Control pane.
When the variables are marked as viewable on the Agent Desktop, the flow designer can:
-
Select the variables to be displayed on the popover and Interaction Control pane.
-
Arrange the selected variables in the order they should be displayed.
-
Customize the label that is associated with the variable when it appears on the Agent Desktop.
The popover variables provide brief information on an incoming call, and the information helps agents to learn more about customers before interacting with them. When a voice call is accepted, the configured variables appear in the Interaction Control pane. For more information, see the following sections:
-
Desktop Viewable Variables in the Cisco Webex Contact Center Setup and Administration Guide.
-
Popover in the Cisco Webex Contact Center Agent Desktop User Guide
-
Interaction Control in the Cisco Webex Contact Center Agent Desktop User Guide
28 September 2022
Advanced queue information and escalate call distribution group
Webex Contact Center now supports these new Flow Control activities:
-
Advanced Queue Information: This activity displays the real-time count of agents in the Available state and the count of logged in agents for a specific set of skill requirements. Based on the number of agents available to handle contacts, flow developers can use this activity to decide and manage the flow sequence.
-
Escalate Call Distribution Group: This activity allows flow developers to escalate a queued contact to the next or last call distribution group. This provides better control and flexibility to the flow developer to manage contacts that are parked in a queue and helps reduce wait time for contacts.
For more information, see Advanced Queue Information.
14 September 2022
Agent Desktop enhancement – Sign in with country code
Agents can sign in to Agent Desktop based on their geographic location. They can do the following:
-
Choose the country code from a drop-down list and enter the dial number in the Station Credentials dialog box.
-
Save the station credential preferences for future sign-ins.
For more information, see the Sign In to the Agent Desktop section in the Cisco Webex Contact Center Agent Desktop User Guide.
9 September 2022
Real Time Media Service (RTMS) voice platform
Webex Contact Center introduces an enhanced media processing platform Real Time Media Service (RTMS) as the primary media services engine for Webex Contact Center. Phase one of the global RTMS rollout includes support for Voice POP-based PSTN connectivity options. This enables customers to use either partner-provided PSTN (service providers) or extend PSTN services such as Bring your Own PSTN (ByoPSTN) from their Private Branch Exchange (PBX) deployment for the contact center.
Support for additional connectivity such as Webex Calling Subscription-based (CCP or LGW) PSTN and Cisco Bundled PSTN will be added at a later date. Customer eligibility is evaluated during onboarding and partners will choose RTMS within Partner Control Hub during onboarding.
For more information, see the Set Up Voice Channel for Webex Contact Center article and Services Setup wizard section in the Get Started with Webex Contact Center article.
10 August 2022
Change the site of an agent
With this enhancement, you can change the site that is assigned to an agent. The teams and multimedia profile values must be changed accordingly. Cisco recommends updating agent sites within a planned maintenance window and agents to create a new session on the Agent Desktop. For more information, see Edit a User section in the Provisioning chapter of the Cisco Webex Contact Center Setup and Administration Guide.
5 August 2022
Flow Designer Enhancements
-
Autosave Toggle for Flows: Flow developers can enable or disable autosave of a flow using the Autosave toggle button.When you enable this feature, Flow Designer automatically saves the changes made to the flow every three seconds. For more information, see Enable or Disable the Autosave Option.
-
Revert a Flow to its previous version: Flow Designer allows flow developers to revert a flow to its previously published version. It opens the flow in edit mode where you can make the necessary changes and publish the flow again with a new version. For more information, see Revert a Flow.
-
Export and Import of Flows: Flow Designer allows flow developers to export or import flow control scripts across the same or different tenants. This feature enables flow developers to replicate flow scripts with greater ease than having to recreate flows. You can navigate to Routing Strategy > Flows tab in the Management Portal to access the Export and Import flows feature. For more information, see Export and Import flows.
-
Copy and Paste Activities in Flows: Flow Designer allows flow developers to copy and paste an existing activity in multiple places in a flow, without having to choose a new activity from the Activity panel each time. This helps to save the time and effort to choose and configure the same activity multiple times. For more information, see Copy and Paste Activities.
28 July 2022
Desktop inactivity timeout
This feature allows administrators to specify an Idle inactivity timeout for the Desktop application. This helps to prevent agents and supervisors from using licenses indefinitely and blocking contact center resources. A tenant level timeout can be defined in Settings in the Cisco Webex Contact Center Setup and Administration Guide.
and additionally administrators can also set Agent Profile level timeouts that override the tenant level settings. For more information, seeIf an agent is inactive on the Agent Desktop for a specified duration, the agent is notified with the Prolonged Inactivity dialog box. The dialog box with a countdown timer appears one minute before the configured timeout occurs. If you don't click the Stay Signed In button before the timer runs out, the Agent Desktop signs you out. For more information, see Inactivity Timeout in the Cisco Webex Contact Center Agent Desktop User Guide.
26 July 2022
Configurable RONA timeout for each channel
Administrators can now configure tenant level Redirection on No Answer (RONA) timeout for each channel. The values can be configured on the
page.The supported channel types are:
-
Telephony
-
Chat
-
Email
-
Social
For information about configuring RONA timeout values, see the article Desktop Settings for Webex Contact Center.
25 July 2022
Customize Webex Contact Center tenant time zone
This feature allows a user to select the contact center tenant time zone when provisioning a subscription or trial using the First Time Setup Wizard. For more information, see the article Get Started with Webex Contact Center.
25 July 2022
Desktop Layout enhancement
With this enhancement, new features that are released for the desktop layout are automatically available to users who use an unmodified desktop layout. No administrator action is required to apply new features to teams that use unmodified layouts. The new layout-based features are available when a user refreshes their Desktop session or signs in to the Desktop.
For teams that use a custom desktop layout, administrators must periodically refresh the layout definition to incorporate new features. When administrators view an unmodified layout or a team that uses an unmodified layout, a message is displayed indicating that new Desktop features are automatically applied.
For more information, see Desktop Layout in the Cisco Webex Contact Center Setup and Administration Guide.
21 July 2022
Agent Desktop enhancement—Add illustration to the task page
A new property taskPageIllustration
is provided in the desktop layout JSON file. The new property allows the administrator to customize the blank task page illustration based on organization preferences and brand alignment. When an agent signs in, the task page displays the configured illustration as a background. For more information, see taskPageIllustration.
18 July 2022
WhatsApp for inbound customer care:
Webex Contact Center integrates WhatsApp as a channel for improved customer interaction. The WhatsApp channel allows end consumers to reach out to businesses as an additional channel of choice. For more information, see Set up WhatsApp Channel in the Cisco Webex Contact Center Setup and Administration Guide.
With WhatsApp integration, agents can respond to WhatsApp contacts using the Webex Contact Center Agent Desktop. For more information, see Manage WhatsApp Conversations in the Cisco Webex Contact Center Agent Desktop Guide.
15 July 2022
Agent Desktop enhancements
-
User experience enhancement—Engaged label: When an agent is in the Available state and accepts an active request, the Agent Availability state displays an intuitive label called Engaged. The Engaged label appears on the Agent Desktop when the agent has accepted the task and connected with the customer. When the Engaged label is displayed, the agent can continue to receive active requests on other channels, depending on the channel capacity. For more information, see Agent Availability States.
-
Ability for agents to provide feedback on their desktop experience: We continue to rapidly evolve the Agent Desktop based on user feedback. To make it easier for agents to provide inputs that help us to improve their desktop experience, we are providing a feedback option within the Agent Desktop. For more information, see Navigation Bar.
13 July 2022
Agent-based routing
Agent-based routing allows you to assign a dedicated agent or a relationship executive to your contacts. Use agent-based routing to route, queue, or park your contacts directly to preferred agents.
Do you have contacts that call the contact center frequently? You can assign the last agent who interacted with the contact as the preferred agent whenever that contact calls.
The queue-to-agent activity within the flow enables agent-based routing. The agent's email address or ID in the queue-to-agent activity enables routing of contacts to preferred agents.
With this enhancement, you can reduce the time that you spend resolving calls, and improve the overall customer experience. For more information, see Agent-based Routing.
13 July 2022
Update agent skills in realtime
When you update the skill profile of agents or add skills to an agent profile, this is updated in realtime without the need for agents to sign out or sign back in to see the updates. For more information, see Teams.
7 July 2022
Windows 11 support in Webex Contact Center
Webex Contact Center supports the Microsoft Windows 11 operating system for Control Hub, Management Portal, Flow Designer, Desktop, and Analyzer.
For more information, see the following topics:
-
The Control Hub tab in the article System requirements for Webex services.
-
The Supported Browsers for Management Portal and Flow Designer Browser Requirements sections in the Cisco Webex Contact Center Setup and Administration Guide.
-
The Browser Requirements section in the Cisco Webex Contact Center Agent Desktop User Guide.
-
The System Requirements section in the Cisco Webex Contact Center Analyzer User Guide.
21 June 2022
Agent Desktop enhancement—Error messages when outdial calls fail
When an outdial call fails, the Agent Desktop displays new error messages for the following scenarios:
-
An outdial number dialed by an agent doesn't connect to the customer. For example, call connectivity issues.
-
An agent rejects an outdial call. For example, when the agent is busy in another interaction.
-
A customer disconnects an incoming call. For example, the customer cancels an incoming call.
-
A customer doesn't answer an incoming call. For example, the call rings but the customer fails to answer the call.
For more information, see Make an Outdial Call.
16 June 2022
Web callback enhancements
Do you want your callers to submit callback requests from any external source such as website, chat, or mobile app? We have a Web Callback API available now.
After a request is submitted, it is sent to the Webex Contact Center system. Webex Contact Center receives the callback request and initiates a call to the requestor on an outbound entry point that is used exclusively for callbacks.
Partners or customers should build and maintain the front end and user interface to submit the callback request. The ability to cancel callback requests, skill-based routing, scheduling, and the retry mechanism will not be available in this release.
The Callback report in Analyzer includes the web callback report with the following fields:
-
Type of Callback: The type of callback can be Courtesy or Web.
-
Source of Callback: The source of callback can be website, chat, or mobile app.
The Agent Desktop displays the new callback icon.
For more information, visit the Webex Contact Center for Developers portal.
26 May 2022
Dynamic prompt support for IVR
Flow Designer supports a single IVR flow to handle interactions in multiple languages based on the customer's choice of language. Flow developers can configure the audio prompt variable in various IVR activities such as Play Music, Play Message, Menu, and Collect Digits. This variable selects the audio prompts to be played dynamically in the language selected by the customer during the interaction.
For more information, see the Activities in Call Handling section in the Cisco Webex Contact Center Setup and Administration Guide.
18 May 2022
System limits in Webex Contact Center
Configuration limits for Webex Contact Center are now documented and published. For more information, see System Limits in Webex Contact Center in the Getting Started chapter of the Cisco Webex Contact Center Setup and Administration Guide.
9 May 2022
Administrator Licensing Changes
Assigning a premium agent license to an administrator is now optional. There is no license cost for administrators who do not access any agent or supervisory features. Such administrators do not have access to the following modules in the Management Portal:
-
Agent Desktop
-
Reporting and Analytics
-
Call Monitoring
-
Recording Management
-
Agent State Data Realtime
For more information about administrator licensing changes, see Webex Contact Center Documentation.
21 April 2022
Agent Desktop Enhancements
-
Removed the background illustrations on the landing page: The landing page so far displayed some default illustrations as a background when an agent signed in to the Agent Desktop. These default illustrations are removed, and agents now see a landing page without illustrations.
-
Reorder tabs in the Auxiliary Information pane: Agents can drag and drop tabs in the Auxiliary Information pane to change the tab order. This feature is applicable for:
-
Tabs that are displayed in the Auxiliary Information pane.
-
Additional tabs in the Auxiliary Information pane. The agent can click the More Tabs drop-down list and then select the required tab.
The order of the tabs is retained even after an agent navigates away from the Auxiliary Information pane, reloads the browser, clears the browser cache, or sign out and sign in again to the Agent Desktop.
To reset tabs to the default order, agents can click the More Actions () icon and select the Reset Tab Order option.
For more information, see Auxiliary Information Pane in the Cisco Webex Contact Center Agent Desktop User Guide.
To enable this feature, the desktop layout JSON file must include the following new properties:
-
Drag and drop tabs: Administrators must set the draggable property value to true. In addition, set the comp-unique-id property to a unique value to identify the component.
-
Reset tab order: Administrators must specify the reset attributes for the agentx-wc-more-actions-widget component.
For more information, see Auxiliary Information Pane in the Cisco Webex Contact Center Setup and Administration Guide.
-
12 April 2022
Stock transition reports
Nine new voice-only stock transition reports are now available in Webex Contact Center. These reports have the same look and feel as that of Cisco Unified Contact Center Express (CCX) reports.
For more information, see Transition Reports in the Cisco Webex Contact Center Analyzer User Guide.
11 April 2022
New digital channels released with full General Availability
The new digital channels are now released with full General Availability.
New digital channels—Chat, Email, Short Messaging Service (SMS), and Facebook Messenger—are now available in Webex Contact Center in the US, UK, ANZ, and EU regions. Customers can work with the partners and account managers to plan their organization onboarding and avail the new digital channels.
Customers, when using these channels, can use the following enhancements:
-
Flow Builder: This enhancement empowers customers to create powerful self-help. Flow Builder is an editor that enables customers to create interactive communication flows with minimal programming or scripting efforts. It has an easy-to-use drag-and-drop interface called Flow Canvas, which helps to build communication flows using Nodes.
-
Skills-based Routing: Administrators can assign skill requirements as well as skill relaxation criteria to contacts in the QueueTask node in the Flow Builder. Contacts are routed to agents based on skill requirements that are matched best at that point in time in the flow.
-
Screen Pop: A screen pop is a window that autonomously appears in an agent's desktop when the agent performs certain actions such as accept a contact request or respond to a contact request from a customer. Screen pops help the agent to get more information about the customer to proceed further with the conversation.
-
Automated interaction messages via Flow or Bot allow customers to create a QnA or Task bot, and integrate it via a Flow.
-
The channel-specific capabilities allow hyperlinks and delivery receipts.
All digital channels are part of the Premium Seat License. Charges are extra for the following services: automated interaction messages, short code SMS, long code SMS, toll-free SMS, and bot usage.
For more information, see New Digital Channels in the Cisco Webex Contact Center Setup and Administration Guide.
Migration from select older platforms is also supported. For more information, see the article Upgrade from Cisco Webex Contact Center 1.0 to Cisco Webex Contact Center.
31 March 2022
Auto AnswerAuto Answer enables a supported Webex Calling-based agent device (Webex Calling app or MPP phone) to automatically answer calls. The agent hears a tone when the call is automatically answered.
The feature requires a subscription to Webex Calling.
The auto answer behavior applies to calls received or initiated by an agent on the Agent Desktop. Calls that agents receive that aren't managed by the Webex Contact Center ring as usual; for example, from agent to agent.
Administrators use the Agent Profile tab in the Provisioning module of the Management Portal to set the Auto Answer field to Yes. For more information, see the Agent Profile section in the Provisioning chapter of the Cisco Webex Contact Center Setup and Administration Guide.
30 March 2022
Switch Telephony Option
On request, customers can access a wizard-driven workflow that automatically switches the telephony provider for the tenant. This allows customers to switch among the VPOP Bridge, Cisco Bundled PSTN, or Webex Calling (CCP/Local Gateway) options. Customers need a scheduled downtime to switch the telephony provider.
For more information, see the article Set Up Voice Channel for Webex Contact Center.
16 March 2022
User Experience Enhancement in Services Setup Wizard
The Services Setup wizard is now enhanced. The Contact Center service setup aligns with the new user experience. There are no changes to the configuration options and they remain the same as before.
For more information, see the article Get Started with Cisco Webex Contact Center.
03 March 2022
Seamless Customer Upgrade Path from Cisco Customer Journey Platform (R10) or CC-One (R9) to Webex Contact Center
This feature enables customers who use Cisco Customer Journey Platform (R10) or CC-One (R9) to upgrade to Webex Contact Center. Customers who enroll for this feature are provided access to a migration workspace. This workspace has the following key capabilities:
-
Tenant Configurations: Customers can extract administrative configuration data from their legacy tenant and convert it to a format that can be used to quickly create the same configurations in Webex Contact Center.
-
Historical Data: After customers have migrated completely to Webex Contact Center and their legacy tenants have been decommissioned, the customers can query analyzer data that was created on their legacy platform.
-
Call Recordings: After customers have migrated completely to Webex Contact Center and their legacy tenants have been decommissioned, the customers can query and download call recordings that were created in their legacy platform.
For more information, see the article Migrate from Cisco Customer Journey Platform (R10) and Cisco CC-One (R9) Releases to Cisco Webex Contact Center.
Bulk Operations for Webex Contact Center
Bulk Operations allows partners and customers to use CSV files to create administrative configurations for Webex Contact Center in bulk. This feature helps to automate the onboarding of new customers and allows existing customers to easily make large scale configuration updates to their tenant.
For more information, see the article Bulk Operations in Webex Contact Center.
15 February 2022
Surge Protection: Maximum Concurrent Voice Calls for a Tenant
This feature defines the maximum number of calls that can be active on the customer tenant. The value is termed as Maximum Concurrent Voice Contact Threshold and can be accessed on the Settings tab of the Management Portal. After the threshold is reached, any new calls are rejected until existing calls disconnect, to retain the number of concurrent calls below the threshold. The concurrent calls in the contact center include inbound calls and outdial calls (outdial calls made by agents, outbound campaign calls, and callbacks).
The value of Maximum Concurrent Voice Contact Threshold is set to 30% higher than the Concurrent Voice Contact Entitlements:
Maximum Concurrent Voice Contact Threshold = Concurrent Voice Contact Entitlements * 1.3
The value of Concurrent Voice Contact Entitlements is based on the following formula:
Concurrent Voice Contact Entitlements = [((Number of committed Standard Agent licenses + Number of committed Premium Agent licenses) * 3) + Number of IVR Add on licenses purchased]
For zero commitment subscription, the value of Concurrent Voice Contact Entitlements is:
Concurrent Voice Contact Entitlements = [100 + Number of IVR Add on licenses purchased]
Customers can raise a support request to decrease or increase the Maximum Concurrent Voice Contact Threshold. The maximum value allowed for concurrent voice contact threshold is 13000. For more information, see Concurrent Voice Contact Settings in the Cisco Webex Contact Center Setup and Administration Guide.
The Surge Protection Statistics report is introduced in the Analyzer. For more information, see Surge Protection Statistics in the Cisco Webex Contact Center Analyzer User Guide.
Skills-based Routing Enhancement
A new method of contact selection—Skills-based Contact Selection—is introduced in Skills-based Routing (SBR). Customers can opt for one of the following methods to select contacts—Skills-based Contact Selection or First In, First Out (FIFO) based selection. In Skills-based Contact Selection, SBR filters contacts in a queue periodically to match the agent skills in the sequence—(1) contact priority and (2) timestamp (oldest to newest).
Contacts that are sent to SBR queues are parked until a matching agent is available. When an agent is available, the matching contact among the parked contacts connects to the agent on priority, irrespective of the contact's position in the queue. The Skills-based Contact Selection method thus reduces the wait time of parked contacts and improves the productivity of agents.
By default, Skills-based Contact Selection is enabled for customers. To enable FIFO based contact selection, customers must contact Cisco Support. For more information, see Skills-based Contact Selection in the Cisco Webex Contact Center Setup and Administration Guide.
11 February 2022
Agent Desktop Enhancement - Reorder Icons on the Horizontal Header
A new property headerActions
is added to the desktop layout JSON file. This property allows the administrator to change the default order of the icons on the horizontal header of the Agent Desktop—the (1) (Webex), (2) (Outdial), and (3) (Notification Center) icons.
headerActions: ["webex", "outdial", "notification"],
The headerActions property value is case sensitive.
To remove the header icons and their associated functionality from the Agent Desktop, the administrator must remove the property values.
For more information, see headerActions in the Provisioning chapter of the Cisco Webex Contact Center Setup and Administration Guide.
Date Format Options for Interval Field in Analyzer Reports
The default date format for the Interval field in the Analyzer reports is mm/dd/yyyy
. With the new enhancement, the Analyzer allows users to choose different date formats for the Interval field, similar to other fields in the reports.
Customization of date format was available for profile variables only, previously.
For more information, see Change Date Format of the Interval Field in the Cisco Webex Contact Center Analyzer User Guide.
10 February 2022
Handle Invalid DTMF Input in IVR Post-call Surveys
Webex Contact Center can handle scenarios where there is invalid or no DTMF (dual-tone multifrequency) input response from customers during IVR post-call surveys. Flow developers can configure the Timeout parameter in the Advanced Settings section of the Feedback activity in the Flow Designer to define the maximum duration (in seconds) for which the system waits for DTMF input from customers. Further, administrators can configure the following IVR settings for Webex Contact Center, in the Questionnaire Settings tab of the post-call survey questionnaire in Webex Experience Management:
-
Maximum Invalid Inputs and Timeout Allowed: Administrators can select a value in the Maximum invalid inputs and timeout allowed drop-down list to set the maximum number of times for which the system allows invalid input or no-input responses from customers.
-
Audio Files for Notification Messages: Administrators can upload audio files to play notification messages for invalid input, DTMF entry timeout, and maximum number of retries exceeded, respectively.
If a customer enters an invalid input or does not enter any input to a survey question within the specified timeout period, the contact center plays the audio message to notify the customer of the invalid entry or timeout, and then plays the same survey question to the customer. When the maximum number of attempts elapse, the contact center plays the corresponding audio notification to the customer, skips the remaining questions in the survey, and plays the Thank You message to end the survey.
For more information, see Validate DTMF Input Response in IVR Post-call Survey in the Cisco Webex Contact Center Setup and Administration Guide.
07 February 2022
Global Variables in Webex Contact Center
Administrators can define global variables using the Provisioning module in the Management Portal. Administrators can set the global variables as agent-viewable and agent-editable in order to make them available to agents via the Agent Desktop. Additionally, administrators can set the variables as reportable to include them in Analyzer reports. Flow developers can use the global variables within flows to set and pass values in the context of interactions handled in the contact center. If an agent updates an agent-editable global variable value, the updated value will be available in the Analyzer for reporting. This feature enables administrators to define reportable global variables and persist them across Webex Contact Center components.
For more information, see Global Variables in the Cisco Webex Contact Center Setup and Administration Guide.
Flow developers can no longer create Call-Associated Data (CAD) variables using the Flow Designer. Custom flow variables will remain non-reportable.
28 January 2022
Webex Customer Experience for Developers Portal
The Webex Customer Experience for Developers Portal enables third-party developers to access Webex Contact Center, and areas such as AI (Artificial Intelligence) and the journey within the customer experience platform programmatically. The portal provides REST (Representational State Transfer), gRPC (gRPC Remote Procedure Call), GraphQL APIs (Application Programming Interfaces), notifications, and SDKs (software development kits) to help developers build and enhance customer experience. Developers can become familiar with the APIs by using the API reference documents, sample code, and the Try It Out functionality that are provided in the portal, to build customer experience apps.
The following features are available as part of the new release:
-
Automated Integration Process: Through integrations, developers can request permission to invoke Customer Experience (CX) APIs. Developers can now register and manage integrations easily via my-apps in Webex Contact Center Developer portal.
-
Task Webhooks: Developers can receive real-time notifications on task events via task webhooks.
-
Multimedia Profiles API: A new CRUD (Create, Read, Update, and Delete) API endpoint for multimedia profiles is available now.
-
Rate Limiting Guide: A new Rate Limiting Guide is available at Webex Contact Center for Developers portal documentation.
-
Authentication Guide: To authenticate apps to access resources, see the Authentication Guide at Webex Contact Center for Developers portal documentation.
For more information, visit the Webex Contact Center for Developers portal.
22 January 2022
E.164 Format Support for International Calling in Webex Contact Center
Webex Contact Center supports the E.164 phone number format for international calling for agents and supervisors. This is in addition to the IDD (International Direct Dialing) format that was previously supported for all telephony options in Webex Contact Center.
With this enhancement, the E.164 format is supported for all PSTN options for Webex Contact Center—Cisco Provided Bundled PSTN, Service Provider PSTN, Bring Your Own PSTN (BYO PSTN), Bring Your Own PSTN with Local Gateway (Webex Calling), and Cloud Connected PSTN (Webex Calling).
Webex Contact Center supports the E.164 format in the following scenarios:
-
Inbound Calls: Contact center customers can use dial numbers in the E.164 format to connect to the contact center.
-
Agent Sign-In: Agents can sign in to the Agent Desktop by entering dial numbers in the E.164 format (in addition to the IDD format) in the Station Login dialog box. This functionality enables agents located in different geographical regions to stay connected to their Webex Contact Center tenant to handle voice calls. For more information, see Sign In to the Agent Desktop in the Cisco Webex Contact Center Agent Desktop User Guide.
For more information about configuring the dial number of an agent, see Edit a User (Agent Settings) in the Cisco Webex Contact Center Setup and Administration Guide.
-
Transfer, Consult, and Conference Calls: Agents can enter dial numbers in the E.164 format (in addition to the IDD format) in the Transfer Request and Consult Request dialog boxes to initiate transfer, consult, or conference calls with agents located in other geographical regions. For more information, see Transfer a Call and Initiate a Consult Call in the Cisco Webex Contact Center Agent Desktop User Guide.
For more information about configuring phone numbers in the enterprise address book, see Address Books in the Cisco Webex Contact Center Setup and Administration Guide.
-
Outdial Calls and Outbound Campaign Calls: Agents can make outdial calls to contacts in other geographical regions by using phone numbers in the E.164 format, in addition to the IDD format. This enhancement is applicable for outdial calls, courtesy callback, and outbound campaign calls. For more information, see Make an Outdial Call in the Cisco Webex Contact Center Agent Desktop User Guide.
-
Supervisor Call Monitoring: Supervisors can now enter the callback number for call monitoring, barge-in, and whisper coaching in the E.164 format, in addition to the IDD format. For more information, see Monitor Calls and Create or Edit a Monitoring Schedule in the Cisco Webex Contact Center Setup and Administration Guide.
Large organizations may have agents operating in many countries around the world. These agents are likely to experience longer latencies as the round trip of voice telephony can be a factor in the origination-to-termination matrix.
22 December 2021
Retain Dashboard Filters in APS and Management PortalWebex Contact Center stores the filters that are set in each tab of the Agent Performance Statistics (APS) in the Agent Desktop and the Management Portal, in the browser cache. Caching the filters in each tab saves the time taken by agents to set filters every time they change tabs, thereby providing them a better user experience.
The filter changes made by a user are stored in the browser cache of the user's computer for the specific user ID. The filters that the user sets remain the same even if the user refreshes the browser or logs back in to Webex Contact Center using the same browser. The user can reset the filters to the default values by clearing the browser cache.
For more information, see Summary Report, Agent Stats - Historic report, and Agent Stats By State - Historic report in the Cisco Webex Contact Center Agent Desktop User Guide.
This enhancement is applicable for the Agent Desktop and Management Portal, but not for the Analyzer reports.
Retain Column Width in Tabular Reports
Analyzer users can change the column width in tabular reports dynamically when running reports. However, the changed column width was not retained previously when the reports were refreshed, making it necessary for users to resize the columns again.
With the new enhancement, Webex Contact Center stores the changed column width in the browser cache of the user's computer, for the specific user ID. The changed column width remains the same even if the user refreshes the browser or logs out and logs back in to Webex Contact Center using the same browser. The user can reset the column width to the default size by clearing the browser cache, if required.
For more information, see Change Report Column Width in the Cisco Webex Contact Center Analyzer User Guide.
This enhancement is not applicable for the Threshold Alerts section.
Whole Number Format for Contacts Handled
Tabular reports in the Analyzer are enhanced to display the number of contacts that are handled, in the whole number format. This is applicable to the following columns:
-
Contacts Handled
-
Inbound Contacts Handled
-
Outdial Contacts Handled
The reports displayed the data in the decimal format previously.
15 December 2021
Agent Desktop Enhancements
-
Retain Data for Current Agent Task: A new property
stopNavigateOnAcceptTask
is added to the desktop layout JSON file. This property determines whether to shift the focus to a newly accepted task or not, when an agent accepts the new task. Administrators can set the property toTrue
orFalse
.-
True:
Retains the focus on the current task that the agent is working on. This helps to retain unsaved data that is being entered for the current task. -
False:
Shifts the focus to the newly accepted task. This is the default value.
For more information, see JSON Layout Top-Level Properties in the Cisco Webex Contact Center Setup and Administration Guide.
-
-
Support Special Characters in Dial Number for Calls: Agent Desktop supports the special characters # (hash), * (asterisk), and : (colon) in addition to + (plus) in the dial number for outdial calls, transfer requests, and consult requests.
When an agent copies a number with special characters to the Dial Number field or dialpad, the Agent Desktop retains only those special characters that are supported (+, #, *, and :).
For more information, see Manage Voice Calls in the Cisco Webex Contact Center Setup and Administration Guide.
-
User Experience Enhancement - Incoming Call Popover Labels: New labels appear on incoming call popovers for easy identification of the call type. The labels also improve accessibility for vision-impaired users.
Additionally, the Agent Desktop displays and as the Callback and Campaign Call icons respectively.
The following table lists the call types, icons, and the corresponding labels:
Call Type
Label
Icon
Incoming Voice Call
Incoming Call
Callback
Callback
Outbound Preview Campaign Call
Campaign Call
Outdial Call
Outdial Call
For more information, see Task List in the Cisco Webex Contact Center Agent Desktop User Guide.
03 December 2021
Localization Support Additions in Analyzer
The Analyzer supports localization in two more languages—English (UK) and Portuguese (Portugal), in addition to the 27 languages that were previously supported.
30 November 2021
Support Multiple Languages for Post-call Surveys
Contact center customers can provide feedback via post-call surveys powered by Webex Experience Management in multiple languages. This feature is available for both Voice and Email/SMS survey channels.
To select a custom language for a post-call survey, the flow developer can use the Global_language
variable or select the Override Language Settings toggle button in the Language Settings section of the Feedback activity in Flow Designer. If the selected language is not configured in the survey in Webex Experience Management or is not supported, the survey falls back to use the default language English (US).
For more information about the supported languages and how to configure a custom language, see Language Settings in the Cisco Webex Contact Center Setup and Administration Guide.
-
For existing flows, enabling the Override Language Settings feature resets the language for all Voice and Email/SMS surveys to English (US). Customers must modify any existing flows (by enabling the Override Language Settings toggle button and then selecting the custom language) to continue using a custom language.
-
The
Preferred Language
andSet to Variable
parameters are removed from the Feedback activity.
Support Welcome and Thank You Messages in Post-call Surveys
Administrators can configure survey questionnaires to play Welcome and Thank You messages at the beginning and end of IVR post-call surveys. To enable these messages in a survey, the administrator must add corresponding audio files in the Welcome note and Thank You note when configuring the survey questionnaire in Webex Experience Management. These messages use the language setting that is configured in the Feedback activity in the Flow Designer.
The Welcome and Thank You messages are played in the same language as set in the Flow Designer for the survey and selected by the customer. If these messages are not configured and therefore not available in the set language in the survey questionnaire, the contact center skips the messages and plays only the survey questions without the messages.
Support Variables for Custom Prefills in Post-call Surveys
Webex Contact Center supports additional data (for example, Customer Name: John, Country: US) in the form of optional variables. The additional data can be passed to Webex Experience Management, to be stored as part of survey response data.
To enable Webex Contact Center to pass additional data to Webex Experience Management, the administrator must create custom prefill questions in the survey questionnaire in Webex Experience Management. Further, the flow developer must configure corresponding variables as Key-Value pairs in the Feedback activity in the Flow Designer. The flow developer must enter the Display Name of the question in the survey questionnaire in Webex Experience Management as the Key parameter of the corresponding variable in the Feedback activity in the Flow Designer.
Webex Contact Center then passes the additional data to Webex Experience Management, which will be stored as part of the survey response data along with the customer responses. This process makes survey responses more contextual and helps to gain deeper data insights using the Customer Experience Analytics widget.
For more information, see Variable Passing in the Cisco Webex Contact Center Setup and Administration Guide.
22 November 2021
New Digital Channels in Webex Contact Center in APJC Region
New digital channels–Chat, Email, Short Messaging Service (SMS), and Facebook Messenger–are now available in Webex Contact Center in the APJC region via imimobile integration.
Customers, when using these channels, can use the following enhancements:
-
Flow Builder: This enhancement empowers customers to create powerful self-help. Flow Builder is an editor that enables customers to create interactive communication flows with minimal programming or scripting efforts. It has an easy-to-use drag-and-drop interface called Flow Canvas, which helps to build communication flows using Nodes.
-
Bot Builder: Using Bot Builder, customers can create a QnA or Task bot, and integrate it via a Flow.
-
The following features are newly supported:
-
Skills-Based Routing: Administrators can assign skill requirements as well as skill relaxation criteria to contacts in the QueueTask node in the Flow Builder. Contacts are routed to agents based on skill requirements that are matched best at that point in time in the flow.
-
Screen Pop: A screen pop is a window that autonomously appears in an agent’s desktop upon certain actions such as accepting the contact, when the agent responds to a contact request from a customer. Screen pops help the agent to get more information about the customer to proceed further with the conversation.
-
The channel-specific capabilities allow hyperlinks and delivery receipts.
-
All digital channels are part of the Premium Seat License. Charges are extra for the following services–automated interaction messages, short code SMS, long code SMS, toll-free SMS, and bot usage.
For more information, see New Digital Channels in the Cisco Webex Contact Center Setup and Administration Guide.
Note: The new digital channels are released in controlled GA (General Availability). Only those customers who have worked with the Cisco Solution Assurance team to plan their onboarding can avail the new digital channels. Migration from select older platforms is also supported. See the article Upgrade from Cisco Webex Contact Center 1.0 to Cisco Webex Contact Center for more information.
15 November 2021
Webex Contact Center Platform Launch in Frankfurt Data Center
The new Webex Contact Center Platform is now available for customers who have their Country of Operation mapped to the Frankfurt data center. Customers who have worked with the Cisco Solution Assurance team during the A2Q process to validate their requirements against the new platform features can continue with the onboarding process. For more details, see the article Get Started with Cisco Webex Contact Center.
OEM (Original Equipment Manufacturer) integration for Calabrio is currently being validated for the new platform and will be available soon.
11 November 2021
Enable Virtual Agent for Voice to Handle No User Input
Virtual Agents for Voice can handle scenarios where there is no input (voice and DTMF) from the user within a specified time period. Flow developers can set the no-input timeout duration and the number of retries to be made if there is no user input, by specifying the following parameter values in the Advanced Settings of the Virtual Agent activity:
-
No-Input Timeout: The duration (in seconds) for which the Virtual Agent waits for user input.
-
Max No-Input Attempts: The number of times the Virtual Agent attempts to wait for user input after the timeout period elapses.
The Virtual Agent activity provides a new output variable ErrorCode
to indicate the timeout event or error status.
The default error message that is currently played in English (US) will no longer be played to the users. To play an audio message to notify the users of an error, flow developers will need to include a Play Message activity in the flow that uses the output variable ErrorCode
from the Virtual Agent activity.
For more information, see Virtual Agent in the Cisco Webex Contact Center Setup and Administration Guide.
26 October 2021
Agent Desktop Enhancements
-
Initiate Outdial Call from Agent Interaction History: An agent can initiate an outdial call by clicking a phone number in the Agent Interaction History pane. The agent can also edit this number before initiating the outdial call.
For more information, see Agent Interaction History in the Cisco Webex Contact Center Agent Desktop User Guide.
-
Localization Support Additions: Agent Desktop supports localization in two more languages—English (UK) and Portuguese (Portugal), in addition to the 27 languages that were previously supported. For more information, see Localization in the Cisco Webex Contact Center Agent Desktop User Guide.
The localization support additions are not currently applicable for Agent Performance Statistics (APS) reports, and will be available along with the localization support additions for Analyzer.
18 October 2021
Access Reports and Dashboards through Browser Links
Standard agents and premium agents who do not have access to the Analyzer to view and run dashboards and reports can access the dashboards and reports using browser links.
The Drill Down functionality is not available for reports that are accessed through browser links.
For more information, see Access Reports and Dashboards through Browser Links in the Cisco Webex Contact Center Analyzer User Guide.
27 September 2021
Regional VPOP Ingress in Remote Countries
Customers onboarding to the new Webex Contact Center in the Australia and United States data centers can configure the following additional remote countries to ingress into their local Virtual Point of Presence (VPOP). Typically, customers order the countries in the Approach to Quality (A2Q) deployment validation phase.
Webex Contact Center Data Center |
Additional Countries Supported |
---|---|
Australia |
Singapore Indonesia Malaysia Phillipines Thailand Vietnam |
United States |
Mexico Brazil Chile Argentina Peru Columbia |
This new offer applies only to the Service Provider PSTN or Cisco Unified Communications Manager deployment architectures. The new offer does not apply to Cisco Webex Calling deployments.
Setting up VPOPs in these countries is predicated by deals in the region, with a 60 day stand-up time for the VPOP.
Multiregion Support
Webex Contact Center with Cisco Webex Calling Telephony supports multiple regions (either countries or parts of countries) for the agents and callers. The following scenarios are supported:
-
Callers are from one region and agents are in multiple regions
-
Callers and agents are in multiple regions
In these scenarios, both inbound calls and outdial calls are supported. For inbound calls, the callers call into the Cloud Connected PSTN (CCP) or the Local Gateway (LGW) setup. These calls are routed to the agents. Agents can make outdial calls to any region.
The agents belong to different locations as configured in Control Hub. The agents are configured with the number and extension for their location.
Inbound numbers are associated with the regions in Control Hub. Calls route to the agents according to the routing strategy configured in Webex Contact Center.
For more information, see Multiregion Support in the Cisco Webex Contact Center Voice Onboarding Guide.
24 September 2021
Webex App (Webex) Integration in Agent Desktop
The Webex App (Webex), along with the messaging, calling, and meeting functionalities, is integrated with the Webex Contact Center Agent Desktop. The integration provides the capability for agents to collaborate with other agents, supervisors, and subject matter experts, without leaving the Agent Desktop. The Webex functionality can be configured by the administrator at the global level or team level via the Desktop Layout.
To enable the Webex feature using the webexConfigured
property, see the JSON Layout Top-Level Properties section in the Cisco Webex Contact Center Setup and Administration Guide.
The Webex App from within the Agent Desktop does not support call control. To receive and make calls, agents require the external, non-embedded Webex App. For more information, see Calling Apps.
To access the Webex feature in the Agent Desktop, see the Webex App (Webex) section in the Cisco Webex Contact Center Agent Desktop User Guide.
Agent Desktop Enhancements
-
Default Dial Number (DN)/Extension for Agent
If the default DN for the agent is configured by the administrator in the Management Portal (Station Login dialog box when the agent signs in to the Agent Desktop:
), the default DN will be prepopulated in the following fields of the-
Dial Number (US Format)
-
Extension
If the administrator restricts the DN to the default DN for an agent (
), the agent cannot edit the prepopulated DN while signing in to the Agent Desktop. The DN will be read-only.For more information, see the Sign In to the Agent Desktop section in the Cisco Webex Contact Center Agent Desktop User Guide.
-
-
Configure Persistent Tabs in Custom Pages and Widgets
An administrator can configure tabs in custom pages and custom widgets as persistent by using the Desktop Layout. To configure persistent tabs, an administrator must set the following attributes for
md-tabs
:-
Set
persist-selection
totrue
. -
Set a unique identifier for
tabs-id
.
Example:
{ "comp": "md-tabs", "attributes": { "persist-selection": true, "tabs-id": "unique-id for all the tabs together in the container" }, }
When
md-tabs
is set to be persistent ("persist-selection": true
), the tab selection is retained even if an agent switches between pages or widgets in the Agent Desktop.The Auxiliary Information pane and the Agent Performance Statistics reports page in the Agent Desktop already show persistent tab behavior.
For more information, see the Navigation (Custom Pages) section in the Cisco Webex Contact Center Setup and Administration Guide.
-
-
Persistent Tabs in Agent Performance Statistics (APS) Reports
The APS reports page persists the previously selected tab even if the agent switches to any other page and then returns to the APS reports page.
For more information, see the Agent Performance Statistics Reports section in the Cisco Webex Contact Center Agent Desktop User Guide.
20 September 2021
Contacts in Queue and Agents Available Reports
Two new real-time stock reports are introduced in the Analyzer–Contacts in Queue and Agents Available. These reports are displayed as cards in the Contact Center Overview - Real-time Dashboard in the Analyzer, and also in the Summary tab of the Agent Performance Statistics page in the Agent Desktop.
The new reports enable users to gain information about contacts that are waiting in queue, and the availability of agents in specific teams, without the overhead of having to look for the information in tabular reports.
For more information about the reports, see Contact Center Overview - Real-Time Dashboard in the Cisco Webex Contact Center Analyzer User Guide.
Define Column Summary for Top-level Row Segment Group in Analyzer Reports
The Analyzer UI now enables users to define column summary for the top-level row segment group in a report. A user can add formulas–Average, Count, Minimum, Maximum, Sum, and Custom for each column. This feature provides an enhanced data viewing experience for tabular reports.
For more information, see Customize Report Summary in the Cisco Webex Contact Center Analyzer User Guide.
07 September 2021
Dynamic Variables for Queue, Skills, and Call Priority
This feature enhances the current Queue Contact activity in Flow Designer by enabling dynamic selection of the queue, skills, and call priority, rather than setting these parameter values statically. The flow developer can now select flow variables in the Queue Contact activity to configure the queue, skills, contact priority, and agent availability checks dynamically.
For more information, see Queue Contact activity in the Cisco Webex Contact Center Setup and Administration Guide.
17 August 2021
Seamless Customer Upgrade Path from Webex Contact Center 1.0 to Webex Contact Center
This feature allows customers who use the Webex Contact Center 1.0 platform to upgrade to the latest Webex Contact Center platform. After this feature is enabled, customers can access the new contact center capabilities without impacting the existing Webex Contact Center 1.0-specific contact flows. Customers can incrementally move Telephony, Chat, and Email workloads to the new platform and transition agents using a phased approach that best suits their business requirements.
For more information, see the article Upgrade from Legacy Platform to Cisco Webex Contact Center.
09 August 2021
Tenant Self-service Settings for Contact Center Administrators
Tenant settings such as Enable Force Default DN (Dial Number), Enable End Call, Enable End Consult, Auto Wrapup Interval, Lost Connection Recovery Timeout, and Privacy Shield that were previously configured using the Customer Journey Platform Service Provider Portal are now moved to Control Hub. These tenant settings can be configured by contact center administrators and need not be managed by the Cisco Operations team. Going forward, all contact center administrator roles can manage these settings.
In accordance with this enhancement, the Settings tab in Control Hub is reorganized, and is divided into the following subtabs:
-
General: Enables administrators to synchronize users between Control Hub and the Management Portal, provides information about the service details of your organization, and provides access to the Management Portal for advanced configurations. For more information, see the article Ways to Add Users for Cisco Webex Contact Center.
-
Security: Enables administrators to configure all security-related settings. This includes Privacy Shield, security settings for chat and email attachments, and content security policy. For more information, see the article Security Settings for Cisco Webex Contact Center.
-
Voice: Enables administrators to add inbound dial numbers that are used to receive customer calls. For more information, see the article Setting Up Voice Channel for Cisco Webex Contact Center.
-
Desktop: Enables administrators to manage and configure voice channel features for the Agent Desktop, and the Auto Wrapup Interval and Lost Connection Recovery Timeout. The voice channel features include Enable Force Default DN, Enable End Call, and Enable End Consult. For more information, see the article Desktop Settings for Cisco Webex Contact Center.
03 August 2021
Webex Contact Center Platform Launch in UK Data Center
The new Webex Contact Center Platform is now available in the UK data center. Customers who select a Country of Operation that maps to the UK data center have the option to onboard to the new Webex Contact Center Platform. For more details on the available options for these customers, see the article Get Started with Cisco Webex Contact Center.
27 July 2021
New Digital Channels in Webex Contact Center
New digital channels–WebChat, Email, Short Messaging Service (SMS), and Facebook Messenger–are now available in the new Webex Contact Center in both US and UK regions via imimobile integration.
Customers, when using these channels, can use the following enhancements that are powered by imimobile:
-
Flow Builder: Flow Builder is an editor that enables customers to create interactive communication flows with minimal programming or scripting efforts. It has an easy-to-use drag-and-drop interface called Flow Canvas, which helps to build communication flows using Nodes.
-
Bot Builder: With Bot Builder, customers can create a QnA or Task bot and integrate it via a Flow.
-
The following new features are supported:
-
Skills-Based Routing: Administrators can assign skill requirements as well as skill relaxation criteria to contacts in the QueueTask node in the Flow Builder. Contacts are routed to agents based on skill requirements to meet the best match at that point in time in the flow.
-
Screen Pop: A screen pop is a window or dialog box that autonomously appears in an agent’s Desktop when the agent answers a customer conversation. Screen pops help the agent to get more information about the caller to proceed further with the conversation.
-
-
The channel-specific capabilities allow hyperlinks and delivery receipts.
-
All digital channels are part of the Premium Seat License. Charges are extra for SMS (Short Message Service) - short code, long code, and toll-free, and bot usage.
The new digital channels are released in controlled GA (General Availability). Only those customers who have worked with the Cisco Solution Assurance team to plan their onboarding can avail the new digital channels. Migration from select older platforms is also supported.
For more information, see New Digital Channels in the Cisco Webex Contact Center Setup and Administration Guide.
26 July 2021
Import and Export Reports
The Analyzer UI now provides administrators the option to import and export reports as individual files or as multiple files in a folder. This functionality enables administrators and partner administrators to export custom reports on a tenant and import them in other tenants.
Improved View for Grouped Reports
The Analyzer UI is improved to remove blank rows in grouped reports. This reduces the blank area in the reports and provides a better viewing experience.
19 July 2021
Hide Inactive Users
The Users page in the Provisioning module in the Management Portal provides a Hide Inactive Users check box to filter out inactive users. If the administrator checks the Hide Inactive Users check box, inactive users in the tenant are not displayed.
Agent Desktop - Screen Pop Enhancement
The Screen Pop tab in the Auxiliary Information pane of the Agent Desktop displays screen pops that are relevant to the currently selected interaction. For example, when an agent accepts an interaction from the customer Jane Doe, the Screen Pop tab of the Auxiliary Information pane displays the screen pop associated with the interaction with Jane Doe.
17 July 2021
Ordering and Provisioning - IVR Port Add-on Offer
By default, a customer is entitled to two IVR port licenses for every Standard or Premium agent license that the customer purchased. This feature introduces an IVR Port Add-on that allows the customer to purchase additional IVR port licenses, so that a higher number of sessions can be hosted on IVR.
Multi-language Support for Virtual Agent
Webex Contact Center integrates with Google Dialogflow to provide conversational IVR experience to customers. Previously, the Virtual Agent defaulted to the language en-US. The Virtual Agent functionality is now enhanced to support additional Google Dialogflow languages and voices. Customers can configure the input language and voice name for the Virtual Agent via the Virtual Agent activity in the Flow Designer.
Virtual Agent Parameters
Flow developers can now configure optional input parameters in the Virtual Agent activity. The input parameters pass extra custom information from the Webex Contact Center flow to the Google Dialogflow bot to implement advanced conversational experiences.
Google Dialogflow Regionalization Support
Webex Contact Center customers can configure their voice and chat Virtual Agents by specifying the Google Dialogflow region. Google Dialogflow provides multiple regions to support regional deployments in order to reduce latency and meet data residency requirements. Customers can specify the Region ID when they configure the Virtual Agents via Control Hub, so that the data originating from Webex Contact Center is directed to the Google Dialogflow data center specified in the Region field.
Agent Availability in Queue for Voice Calls
A flow developer can now determine how many agents are currently available to service a queue. The Get Queue Info activity in the Flow Designer provides extra output variables, so that the flow developer can observe the status of the queue and take remedial action (for example, redirect to self-service or provide skill relaxation criteria) before routing the call to an under-serviced queue. This feature helps to avoid a potential overflow condition.
06 July 2021
New Webex Contact Center Platform Launch in Australia Data Center
The new Webex Contact Center Platform is now available for customers who have their Country of Operation mapped to the Australia data center. Customers who have worked with the Cisco Solution Assurance team during the A2Q process to validate their requirements against the new platform features can continue with the onboarding process. For more details on the steps required for onboarding, see the article Get Started with Cisco Webex Contact Center.
Google CCAI for OEM Customers
Webex Contact Center customers can now use voice and chat virtual agents along with the Cisco-provided Google Cloud Platform project. Customers can now specify the Project ID and Region ID when they create Dialogflow virtual agents on Control Hub. With this feature, customers who purchase the Google CCAI (Contact Center Artificial Intelligence) OEM subscription from Cisco can associate multiple virtual agents with the same Google Cloud Platform project, and be presented with a consolidated Webex Contact Center bill that includes CCAI usage.
Cisco Webex Experience Management-based IVR Post-call Surveys and Post-call Survey Reports
Webex Contact Center integrates with Webex Experience Management to conduct post-call surveys and collect feedback from customers. Post-call surveys can be conducted via SMS or email channels, or IVR.
The following enhancements are available for post-call surveys:
-
Administrators can configure IVR post-call surveys when an inline survey has to be played to the customer at the end of a voice call.
-
Post-call surveys can be conducted via the voice channel, in addition to email and SMS.
-
Details of post-call surveys, such as opt-in statistics, survey response rate, and survey completion rate, can be captured in the Post Call Survey report in the Analyzer.
The global variable Global_FeedbackSurveyOptin
must be used in the flow and set to true
to trigger the post-call survey. Existing flows must be updated to set this variable for conducting post-call surveys successfully.
21 June 2021
Default Outdial ANI
Administrators can set a Default Outdial ANI (Automatic Number Identification) for the contact center organization. The Default Outdial ANI drop-down list in the organization’s Settings tab in the Provisioning module of the Management Portal displays all of the existing dial numbers that are mapped to entry points. The drop-down list enables the administrator to choose a dial number as the Default Outdial ANI for outdial calls from the organization.
When making an outdial call to a customer, if an agent does not select an outdial ANI from the Select Outdial ANI drop-down list, the Default Outdial ANI is used. The Default Outdial ANI will be displayed in the customer’s caller ID.
The Default Outdial ANI is applicable at the tenant level.
16 June 2021
Agent Desktop Enhancement - Screen Pop HyperlinkThe screen pop notification in the Notification Center is displayed as a screen pop hyperlink. The text provided in the new Screen Pop Desktop Label field in Flow Designer is the display text for the hyperlink on the Agent Desktop.
08 June 2021
Agent Desktop Enhancements-
RONA Enhancement: Incoming call requests are not delivered to agents in case of phone, device, or network failure. Incoming call requests are returned to the queue, and the agent state is changed to RONA. New requests are not delivered to an agent who is in the RONA state.
-
Identify Agents for Consult or Transfer Call: In the Transfer Request and Consult Request dialog boxes, the Dial Number drop-down list displays the enterprise address book. Names are available in address book entries, in addition to the Phone Number field that was already available. This helps agents to identify the correct Address Book entry to choose when they perform a consult or transfer during a voice call.
-
Profile Picture: Agents can configure their profile picture when they activate the user account or later, using the Cisco Webex profile page. If an agent does not configure a profile picture, the User Profile displays the agent's initials.
-
Accessibility Compliance: The Agent Desktop provides screen reader support for read-only User Profile elements. This is in compliance with the Web Content Accessibility Guidelines (WCAG) 2.0.
-
User Experience Enhancement:
-
The media channel badge in the Channel Capacity section of the User Profile dialog box highlights only the relevant media channels for which the agent has capacity allocated.
-
02 June 2021
Allow Customers to Configure a Mix of Toll and Toll-free Numbers for Cisco PSTN for Contact Center
Prior to this enhancement, if a customer purchased the Bundle 2: Inbound toll-free number access option with the Cisco PSTN for Contact Center add-on, the customer had to configure all inbound numbers as toll-free. For billing, Webex Contact Center considered all dialed numbers as toll-free.
With this enhancement, Webex Contact Center can classify each number added to the tenant as toll or toll-free. Webex Contact Center billing is calculated based on call volumes on all toll-free numbers.
The following license usage reports are enhanced to help classify toll and toll-free numbers:
-
License Usage Report: This report is enhanced to provide customers a metrics of the daily observed Max Concurrent Toll-Free Calls. This is indicative of the usage of Bundle 2: Inbound toll-free number access. A breakup of the Max Concurrent Toll-Free Calls shows the composition of the calls connected to the Agent, IVR system, and Queue when the maximum value was observed. Additionally, the report provides the concurrent call volumes observed on tolled numbers at the time when Max Concurrent Toll-Free Calls was observed. A breakup of Concurrent Tolled Calls shows the composition of the calls connected to the Agent, IVR system, and Queue.
-
Historical License Usage Report: This report shows the Max Concurrent Toll-Free Calls for the previous months. This report can access data from the past thirty-six months and can display data for a consecutive twelve-month period.
01 June 2021
Agent Desktop Enhancements-
Default Title: The new default title of the Agent Desktop is Webex Contact Center. The administrator can customize the default title at the global level or team level via the Desktop Layout.
-
User Experience Enhancements:
-
The Station Login dialog supports the browser Autocomplete feature. Autocomplete saves the agent's time by automatically filling in the previously entered dial number(s) and extension number(s). The number of entries saved in the standard browsing mode is specific to the browser. To remove the saved entries, the agent must clear the browser cache. The Autocomplete feature is not supported in private browsing mode.
-
The Keyboard Shortcuts dialog now has a minimum height and width (in pixels), beyond which you cannot resize the dialog. This ensures that the content within the dialog remains readable.
-
The Auxiliary Information pane retains the agent's tab selection for a specific interaction even when the agent switches between interactions. For example, consider that the agent is on a voice interaction and has accessed the Screen Pop tab in the Auxiliary Information pane. The agent then switches to a chat interaction and accesses the Contact History tab. When the agent returns to the voice interaction, the Screen Pop tab selection is retained.
-
24 May 2021
Filters in the Run Mode
The Analyzer UI offers filtering capabilities when users execute reports in the run mode. This feature provides an enhanced report generation experience. Users can choose the filters to be displayed when they create or edit a visualization, or when they create a copy of the visualization. When the users run the visualization, the selected filters appear at the top-right corner of the visualization page. Users can filter the visualization using the appropriate filters, without having to edit the report.
28 April 2021
Service Details in Control Hub
A new Service Details section is introduced in the Contact Center Settings tab in Control Hub. This section enables administrators and support engineers to quickly identify the platform-level configurations that are applicable to the customer organization. The Service Details section provides the following information:
-
Webex Contact Center Country of Operation: This field displays the country of operation that was selected in the Setup Wizard when the contact center tenant was provisioned. The field provides an indication of the geolocation of the tenant.
-
Webex Contact Center Platform Details: The value
New Platform
displayed in this field confirms that the tenant is hosted on the latest Webex Contact Center platform. -
Digital Channel: The value
Native Digital
displayed in this field confirms that the tenant is using the current Digital Channel offering from Cisco. Additional values will be introduced for this field, as more contact center digital channel offerings are introduced in the future. This will help differentiate customers who use the Native Digital channel from those customers who will be using the upcoming digital channel offerings. -
Voice Channel: The value
Webex Calling Integrated
displayed in this field confirms that the tenant is using Webex Calling integration for telephony. Future enhancements to the contact center voice platform will introduce additional values for this field. This will help differentiate customers who use theWebex Calling Integrated
platform from those customers who will be using the upcoming voice platform enhancements. -
Webex Contact Center Telephony: This field displays
Webex Contact Center PSTN
,Webex Calling (CCP and Local gateway)
, orVoice POP Bridge
to indicate the PSTN option that is applicable to the customer.
08 April 2021
Agent Desktop Enhancements
-
Availability State Search: An agent can use the search field to search for the availability state to be displayed on the horizontal header of the Agent Desktop. The availability states are Available, and the idle states configured by the administrator.
-
Task List Pane Options: The Task List pane in the Agent Desktop provides the following options:
-
Accept All Tasks: The agent can click the Accept All Tasks button to accept multiple digital channel requests (chat, email, and social messaging conversations) at the same time.
-
New Replies: The agent can click the New Replies button to scroll to view unread digital channel messages (chat or social messaging conversations).
-
-
Special Character Supported for Dial Number and Extension: If an agent copies a Dial Number or Extension that contains special characters (!, @, #, $, %, ^, &, *, ), (, =, ., <, >, {, }, [, ], :, ;, ', ", |, ~, `, _, and -) to the Dial Number or the Extension text box, the special characters are removed when submitting the details. This is relevant for the following dialog boxes:
-
Station Login (Dial Number and Extension)
-
Transfer Request (Dial Number)
-
Consult Request (Dial Number)
The only supported special character is +.
-
-
Desktop Layout JSON File Properties:
-
responsive: A new property named responsive is added to the JSON file. This property determines whether a web component or an iFrame-based widget added in the custom layout at the
page
level or thecomp
level is responsive or not. This property can be configured with one of the following values:-
True: Enables responsiveness of the widget. By default, all widgets are expected to be responsive based on the progressive screen sizes, orientation, and viewing areas of the device being used.
-
False: Disables responsiveness of the widget. If the widgets do not support viewing on different devices, mark them as non-responsive.
-
-
visibility: The visibility property value
NOT_RESPONSIVE
is deprecated, and you can continue to use it only for backward compatibility. Any value set asNOT_RESPONSIVE
previously does not require modification, because the functionality remains the same. To set a newly created widget as responsive or not responsive, use the responsive property.
-
30 March 2021
Flow Chaining
The GoTo activity is introduced in Flow Control to terminate a current flow and hand off the voice call to an entry point or to another flow. Flow to entry point, and flow to flow are voice call handoff mechanisms to redirect calls based on business hours and during emergency conditions.
25 March 2021
Call PrioritizationCall Prioritization enables flow designers to assign priority to inbound calls in a queue. Flow designers can use the Queue Contact activity to assign a priority to a call. When an agent services multiple queues, the call with the highest priority across all queues is assigned to the agent. If two or more calls across multiple queues have the same (highest) priority, the call waiting for the longest duration is assigned first to the agent.
09 March 2021
Agent Desktop Enhancements-
Logo and Title Enhancements: The Agent Desktop now supports larger logos. The administrator can configure a logo comprising a larger image of up to 96 x 32 pixels (width x height). The Agent Desktop title can be an image or text. The logo and title together on the horizontal header of the Agent Desktop cannot exceed the maximum width of 304 pixels.
-
Refresh Data in Transfer Request and Consult Request Dialogs: The Refresh icon in the Transfer Request and Consult Request dialogs in the Agent Desktop enables agents to retrieve the most recent list of agents, queues, or dial numbers.
-
Sub-layout Feature: The Sub-layout feature enables an administrator to define nested desktop layouts using the Agent Desktop JSON layout file. The Sub-layout feature provides finer control over the widget placement and resize behavior.
-
Agent Transfer to an Entry Point: Prior to this enhancement, if an agent was on a call with a customer on a workflow, the agent could transfer the call to another agent in the same workflow. But it was not possible for the agent to transfer the call to a different entry point associated with another workflow.
With this enhancement, the agent can transfer the call to a different entry point associated with another workflow. All Call Associated Data (CAD) variables related to the first flow are carried forward to the new workflow.
For example, if a customer is waiting in a queue that is related to debit card transactions, but intends to transact on credit cards, the agent servicing the customer can now transfer the call to the credit card workflow.
08 March 2021
Download Call Recordings
Administrators and Supervisors can download recordings of calls that were handled by Agents. A new API will be available to enable downloading of the recordings.
February 2021
New Cloud Data Platform Providing Historical and Real-time DataA new Cloud Data Platform is available for Webex Contact Center. The Cloud Data Platform is a big data stream processing platform, which offers increased throughput. The platform provides high data availability, processing real-time call and agent data in 3 to 5 seconds, and historical data within 30 minutes from the time of occurrence of an event. The Cloud Data Platform offers a secure data platform across all channels supported by Webex Contact Center. The platform provides reliable data across real-time and historical reports, ensuring data integrity.
Analyzer connects to the Cloud Data Platform to provide historical and real-time reports.
Global Routing Overrides
A Global Routing Override is a routing strategy that can be applied to one or more entry points. When a contact arrives, the routing engine checks whether a Global Routing Override exists for that entry point. If a Global Routing Override exists, it is then used as the current routing strategy for the entry point, overriding any standard routing strategy associated with that entry point.
Enhancements to Chat and Virtual Agent Template Creation
The user experience on Control Hub for creating and editing Chat and Virtual Agent templates is enhanced to support certain platform upgrades. There is no change to the features provided by the templates.
January 2021
Skills Based Routing
Skills Based Routing is a feature that matches the needs of callers with agents who have the skills to best meet those needs. When voice calls arrive, they are classified into subsets that can be routed only to agents who possess a required set of skills, such as language fluency or product expertise.
Webex Contact Center administrators can now assign skill requirements as well as skill relaxation criteria to calls in the flow. Calls are routed to agents based on skill requirements that are matched best at that point in time in the flow.
Flow Control Usability EnhancementsThe Flow Control user experience is enhanced to support the following:
-
The Flow Control now ensures that the users always enter a unique flow name.
-
The Flow Control publishing experience is enhanced. The following functionality is available in the Flow Control UI after the user validates a flow and clicks the Publish Flow button:
-
If publishing fails, a Toaster Notification is displayed with the Tracking ID and Flow ID. The Tracking ID information can be sent to Cisco support for further assistance. The user can click the Retry Publish button to try again.
-
If publishing succeeds, the user is redirected to a confirmation screen, and will no longer be in the Flow Control UI.
-
-
The Global Properties button is included in the zoom toolbar to enable users to quickly open the Global Properties pane. The Global Properties pane appears by default on the Flow Control canvas when a new flow is created or an existing flow is opened.
December 2020
Blended Multimedia Profiles
Blended Multimedia Profiles offer administrators the ability to configure the media channel types (voice, chat, email, and social) and the number of contacts of each media channel that an agent can handle simultaneously. This feature enables the contact center to balance the load efficiently across media channels, and also provide dedicated attention to customers, improving the customer experience.
Administrators can configure multimedia profiles of the following types:
-
Blended: The administrator can select the media channels and the number of contacts per media channel that the agent can handle simultaneously. The administrator can set up to a maximum of one voice, five chat, five email, and five social contacts for an agent to handle simultaneously.
-
Blended Real-time: Contacts of only one real-time media channel (either voice or chat) can be assigned to the agent at a point in time, along with contacts of other media channel types (email and social). The maximum number of contacts that an agent can handle simultaneously is one voice (default value), five chat, five email, and five social, with either voice or chat assigned to the agent at a point in time.
-
Exclusive: Only one contact can be assigned to the agent across all media channels, at a point in time.
The administrator can then associate the multimedia profile to agents at the site, team, or agent level. The multimedia profile set for a team (via Provisioning in the Management Portal) takes precedence over the multimedia profile set for the site; the multimedia profile set for an agent takes precedence over the multimedia profile set for the team.
Supervisory Capability to Sign Out Agents
Supervisors can view the list of agents who are currently signed in to the Agent Desktop, using a new dashboard Agent State Data – Realtime in the Management Portal. The dashboard provides supervisors the ability to sign out agents who are not handling any active contacts; that is, agents who are in the Available or Idle state across all media channels. This feature helps enterprises manage concurrent licensing costs.
Flow Designer
An all new visual scripting tool is introduced in Webex Contact Center, which allows partners and customers to create customized flows that automate contact center processes. The first release supports flows that handle voice contacts. These flows control how calls flow through the business. This powerful new application has all the functionality of Control Scripts and more, including an updated user interface and Activity nodes with new functionality.
Conversational IVR - Self-service
Self-service is enhanced with new features. The following IVR (Interactive Voice Response) functionalities and activities are available in Flow Designer:
-
Text-to-Speech: This functionality converts arbitrary strings, words, sentences, and variables into natural-sounding, synthetic human speech that can be played dynamically to a caller.
-
Virtual Agent: This activity provides the capability to handle conversations with end users. The virtual agent, powered by Google’s Dialogflow capabilities, provides the speech based Self-service functionality to understand the intent of a conversation and assists the customer as part of the IVR experience.
-
Blind Transfer: This activity provides the capability to transfer a voice contact to an external Dial Number through the IVR without agent intervention.
-
Disconnect Contact: This activity provides the capability to disconnect a contact in the IVR.
The following functionalities are available in the Agent Desktop:
-
IVR Transcript: An agent can view the conversational IVR transcript in the IVR transcript widget.
-
CAD (Call Associated Data) Variables: An agent can view or edit CAD variables based on the configurations that are set in the call flow by the administrator.
The following report is available in the Analyzer:
-
IVR and CVA Dialog Flow Report: This report provides the self-service operational metrics, which includes the number of abandoned calls in self-service and the number of abandoned calls in a queue. Multi-level drill-down on the row segments in the report provides detailed information related to the corresponding entity.
Virtual Agent - Voice
Customers can now offer a Conversational IVR experience to callers by using the virtual agent created in Google Dialogflow. The customers no longer need to navigate through the unwieldy DTMF-based IVR menus; instead, they can speak for self-service.
Customers can configure the Dialogflow service account details in the Control Hub. After the account details are configured, the routing strategy provides an option to connect a Dialogflow virtual agent to drive the IVR. Customers can also configure how the escalated calls need to be handled by creating a mapping between escalation intents and agent queues.
Opt Out of Queue and Estimated Wait TimeThis feature enables options to be presented to the customer using the IVR, while the customer waits in queue to be connected to an agent in the contact center. The customer can be informed of the estimated wait time (EWT) and Position in Queue (PiQ) using the Text-to-Speech functionality. Options can be provided to the customer such as to opt out of the queue and receive a callback, leave a voice message, or continue to wait in the queue.
Courtesy Callback
A customer, when waiting in queue for an agent to become available, can be offered the option to receive a callback rather than having to wait in queue to connect to the agent. The customer can retain the position in queue and receive a callback to the customer’s dialed number, or a number of the customer’s choice. This feature enables the contact center to enhance the customer experience, especially during peak hours when the wait time is more.
Outdial Transfer to Queue
An agent can make an outdial call from the Agent Desktop and can then transfer the call to another queue in the contact center if required, based on the conversation with the customer.
Outdial ANI
An agent can select a phone number from the outdial ANI list while making an outdial call. Outdial ANI enables an agent to select a phone number that is displayed as the caller ID to the recipient of the outdial call. The outdial ANI list must be added to an agent profile by the administrator.
Pause and Resume
An agent can invoke the Pause and Resume recording events from the Agent Desktop during a call. The events are stored in the customer activity record (CAR). The CAR is made available to WFO/WFM providers through an API. If there is a delay in resuming the recording beyond the allowed time lapse, the Privacy Shield feature auto-resumes the recording.
Change Team without Signing Out of the Agent Desktop
An agent signed in to the Desktop can change to a different team without signing out of the Desktop. The agent can change team only when there are no active contact requests or conversations. When an agent changes team successfully, the desktop layout and the routing strategy (voice or digital channel) of the new team are applied.
Agent Desktop Features
A new extensible Agent Desktop is available in this release. The following new features are introduced:
-
User Experience Enhancements: The Agent Desktop has undergone a user experience refresh. The desktop has a comprehensive new look with the functionalities configured by the administrator in the Desktop Layout.
-
Agent State Timer and Connected Timer: The agent state timer displays the time that has elapsed since the agent was in the current state. If an agent is in an Idle state and switches between any other Idle states, the timer displays the time spent in the current state, and the total time spent in all the Idle states together. After the agent accepts a request, the connected timer displays the time that has elapsed since the request was accepted.
-
Pause and Resume Recording: Agents can pause and resume the recording of a call.
-
Channel Capacity: Agents can view the number of contacts that can be handled on each media channel at a given point in time.
-
Notification Settings: Agents can enable or disable desktop notifications, silent notifications, and sound notifications.
-
Toaster Notifications: The Agent Desktop supports browser toaster notifications.
-
Screen Pop: The browser pops up on the Agent Desktop when an agent accepts an incoming call. The agent can view screen pop details either in a new browser tab, existing browser tab, or the Screen Pop tab of the Auxiliary Information pane, based on the screen pop display and the desktop layout settings.
-
Reset the entire desktop layout: Agents can reset a customized layout to the default desktop layout.
-
Keyboard Shortcuts: Agents can use keyboard shortcuts for specific desktop functionalities.
-
Switch to Dark Mode: Agents can enable or disable the dark background theme of the Agent Desktop.
-
Download Error Report: If an agent experiences problems with the Agent Desktop, the agent can download error logs and send the error logs to the administrator to investigate the issue.
-
Campaign Call: Agents can preview the customer's contact information before making an outbound preview campaign call.
-
Agent Sign Out: Agents are notified when the supervisor signs out an agent from the Agent Desktop.
-
Install as an Application: Agents can install the Agent Desktop as a desktop application.
-
Localization: The Agent Desktop user interface supports localization in 27 languages. The following languages are supported:
Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hungarian, Italian, Japanese, Korean, Norwegian Bokmål, Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, and Turkish.
-
Accessibility: The Agent Desktop supports features that improve accessibility for low-vision and vision-impaired users.
-
More user experience enhancements which include the following:
-
Incoming requests that appear either in the Task List pane or in a popover flash for a few seconds, before the agent state is changed to RONA.
-
A badge in the Task List pane indicates the number of unread chat and social messages in a conversation.
-
-
Browser support includes Microsoft Edge Chromium (MS Edge V79 and later).
-
Multiple agents can edit and save CAD (Call-Associated Data) variables with real-time updates.
-
Agents can make outdial calls when they are in the Available state.
-
Agents can enable sound notifications to play sound and use the slider to adjust the volume.
-
The Agent Interaction History pane displays details of the previous communications that the agent had in the last 24 hours, across customers.
-
The Contact History tab in the Auxiliary Information pane displays the previous communications with the customer for the last 90 days. The Contact History is consolidated for all digital channels, whereas for Voice, the history is restricted to the Voice Channel.
-
The Agent Desktop supports a responsive view that enables easy reading and navigation across small (< 640 pixels), medium (641 to 1007 pixels), and large (> 1008 pixels) screen resolutions. The recommended display size for the Agent Desktop is 500 x 400 pixels or higher. Non-responsive widgets cannot ensure the best user experience and are not displayed in the smaller view.
Desktop Layout
The Desktop Layout feature allows the administrator to customize the Agent Desktop layout and assign it to a team.
There are two types of desktop layouts:
-
Default Layout: A system-generated desktop layout that is available for all of the teams.
-
Custom Layout: The layout that the administrator creates based on the requirements of specific teams, and assigns to one or more teams.
The custom layout allows the administrator to customize the following:
-
Title and Logo
-
Drag-and-drop and resize widgets
-
Notification timer and maximum notification count
-
Custom icons, custom tabs, custom header, custom pages, and custom widgets
-
Persistent Widgets: Any custom widget can be defined as persistent. Persistent widgets are displayed on all pages of the Agent Desktop.
-
Screen Pop: The browser pops up on the Agent Desktop when an agent accepts an incoming call. The agent can view screen pop details either in a new browser tab, existing browser tab, or the Screen Pop tab of the Auxiliary Information pane based on the screen pop display and the desktop layout settings.
The administrator can add or remove the following widgets in the custom layout:
-
IVR Transcript
-
Campaign Contact and Call Guide
-
Cisco Webex Experience Management Widgets: Customer Experience Journey (CEJ) and Customer Experience Analytics (CEA)
The following Experience Management widgets are displayed on the Agent Desktop only if your administrator has configured the widgets:
-
Customer Experience Journey (CEJ): Displays all past survey responses from a customer in a chronological list. The widget helps agents to gain understanding about the customer’s past experiences with the business, and engage appropriately with the customer. This widget is automatically activated when an agent engages with a customer through a call, chat, or email. An agent can view ratings and scores such as Net Promoter Score (NPS), Customer Satisfaction (CSAT), and Customer Effort Score (CES) along with all other feedback collected from a customer.
-
Customer Experience Analytics (CEA): Displays the overall pulse of the customers or agents through industry-standard metrics such as NPS, CSAT, and CES, or other KPIs tracked within Experience Management.
When an agent signs in to the Agent Desktop, the desktop layout associated with the agent's team is available to the agent. The agent can customize the desktop layout by using the Drag-and-Drop and Resize features.
In addition to requesting data to be passed to the widgets through properties and attributes, the administrator can perform more complex operations by consuming and manipulating the system data within the widget by using the Agent Desktop JavaScript SDK (Software Development Kit) package.
RONA Popover
If an agent is unable to accept any contact request (voice or digital channel) within the time period configured by the administrator, the contact request is returned to the queue and the system changes the agent state to RONA. The system cannot deliver any new contact requests to an agent who is in the RONA state. When an agent is in the RONA state, a popover appears with the following options:
-
Go To Idle: Indicates that the agent can change the state from RONA to the default idle reason configured by the administrator.
-
Go To Available: Indicates that the agent can change the state from RONA to Available, to accept and respond to contact requests.
New URL for Analyzer
Users can now access Analyzer using the new URL https://analyzer.wxcc-us1.cisco.com/analyzer/home.
Using Webex Contact Center with Webex Calling
Customers who are subscribed to both Webex Contact Center and Webex Calling can use their Webex Calling Dial Number (endpoints) as their preferred agent endpoint devices when used in conjunction with the Webex Contact Center Agent Desktop. This enables agents to log in using their Webex Calling extension number and be remote on supported Webex Calling devices and clients, and enable on-net call transfers to internal users on both the solutions bypassing the PSTN and saving on toll charges.
Webex Contact Center supports the following agent devices for Webex Calling endpoint devices (clients):
-
Webex Calling Desk Phone
-
Webex Calling Desktop App (PC Audio)
-
Webex Mobile App on the cell phone
-
Webex Client that is integrated with Webex Calling (PC Audio)
Call Manager Integration with Webex Contact Center
This feature enables integrating Webex Contact Center with On-premises Call Manager via the Webex Calling Local Gateways (LGW) connectivity option. With this capability, Webex Contact Center agents can use the connected Private Branch Exchange (PBX) extensions as the agent device.
This feature enables enterprises that use LGWs, such as the Cisco Unified Border Element (CUBE) or the Session Border Controller (SBC) along with Webex Calling, to integrate with Webex Contact Center.
OEM Integration with Acqueon - Preview Campaigns
Webex Contact Center is integrated with the Acqueon LCM (Link and Campaign Manager) application to enable outbound preview campaign management for the voice channel. Administrators can configure outbound preview campaigns using the Acqueon LCM interface. Agents can then initiate campaign calls from the Agent Desktop. When an agent initiates a campaign call, a new contact is dynamically retrieved from the ongoing active preview campaigns and assigned to the agent.
Various campaign reports are available in the Campaign Manager modules. Administrators can measure the effectiveness of campaigns via the OEM Integration with Acqueon report in the Analyzer.
Cisco Webex Experience Management Post-Call Survey
Webex Contact Center is integrated with Webex Experience Management, the platform for Customer Experience Management (CEM). This enables administrators to configure SMS and email post‐call surveys to collect feedback from customers.
Social Messaging Channels
Social Messaging is trending as a major way to connect with businesses, to perform all types of one-on-one customer service and query processing tasks. It is asynchronous and personal; Social Messaging apps are already familiar to customers as a means to communicate with friends and family.
Webex Contact Center now supports Social Messaging channels. Customers can interact with agents in the contact center via Facebook Messenger and SMS (Short Message Service). While customers use their Social Messaging app to interact with agents, agents handle the contacts similar to web chat, which does not require any additional training. Additionally, Social Messaging conversations can be integrated with a Virtual Agent (bot) for Chat to enable customers to get self-help before being routed to a live agent, just as in web chat. Intents detected by the Virtual Agent can be used either to service the request directly, or to route the contact appropriately.
The integration supports Google Dialogflow. For SMS, customers need to procure one or more SMS numbers from the supported vendor MessageBird ( www.messagebird.com). For Facebook Messenger integration, customers must have a Facebook page.
Business Rules Engine Support through Flow Control
The Business Rules Engine (BRE) provides a means for tenants to incorporate their data into the Webex Contact Center environment for custom routing as well as for general implementation. With this feature, new and existing customers who are already using the Business Rules Engine (BRE) solution with Webex Contact Center can leverage BRE data through Flow Control for their organization.
Service Specific Administrator Role for Webex Contact Center
A new service specific administrator role is introduced for Webex Contact Center. This role can be assigned to external administrators and administrators in the customer organization. The service specific administrator role enables restricted administrative access on Control Hub. An administrator with this role can manage contact center licenses and administer the contact center service.
Support for provisioning administrators is also enabled in this release. Partner administrators who have provisioning administrator privileges for the contact center service can perform all activities that a partner full administrator can perform.
Support for external read-only administrators is available with this release. External administrators with the read-only role can access all Webex Contact Center administrative interfaces in the read-only mode.
External Administrator Support in Flow Designer
Flow Designer is enhanced to support external administrators. External administrators can view, create, modify, and delete flows using Flow Designer. External administrators with read-only privileges can only view the flows in Flow Designer.
Content Security Policy
Content Security Policy defines an approved list of trusted domains that can be accessed from Webex Contact Center applications. This feature helps comply with the content security policy framework that browsers enforce.
We are sharing details about our planned feature releases that are coming out soon. Cisco may make changes to the anticipated features in its sole discretion. You can subscribe to this article to get updates on any changes.
October 2024
Agent Email Id output variable for Events
Webex Contact Center Flow Developers and Administrators can now utilize agent's Login ID in the form of a unique Email address within Event Flows. This new feature introduces an output variable AgentEmailID, which captures the selected Agent's Logged in Email Address for various events such as AgentOffered, AgentAnswered, AgentDisconnected, and PhoneContactEnded. This enhancement enables additional integrations with external systems like Customer Relationship Management (CRMs) and Ticketing systems for agent specific data, ensuring improved consistency and tracking capabilities. This feature unlocks advanced integration-specific event flows and enhances overall workflow efficiency, by allowing flow developers to accurately tag contact data to the agent's user record on external systems.
Business Rules Engine (BRE) Reliability and Scalability Enhancements
We have enhanced the Business Rules Engine (BRE) application in Webex Contact Center for reliability and scalability. With this update, administrators are recommended to use the updated URLs for the Data Sync and Rules Administration pages, ensuring seamless data uploads and rule configurations. By modernizing the application infrastructure, this enhancement addresses scalability requirements, providing a robust and dependable solution for flow developers and administrators.
The transition is entirely behind the scenes, requiring no changes to flows or data migrations, ensuring uninterrupted operations with improved performance and reliability. Administrators must update their bookmarks to the new URLs. Older URLs will remain functional until their future retirement.
Introducing Web chat asset management on Control Hub
Our latest feature empowers administrators to manage their web chat assets seamlessly. From creating bespoke chat widgets tailored to your brand's identity to efficiently handling IP block lists, Control Hub ensures unparalleled control and customization for your online engagement strategies.
Regional media support expanded to United Arab Emirates (UAE) region
Webex Contact Center is set to expand the Regional Media support to the United Arab Emirates (UAE). This allows administrators to select the UAE as the geographic region for voice media processing. By localizing media processing, Webex Contact Center aims to significantly improve audio quality for both customers and agents by reducing latency.
The expansion to the UAE increases the number of regions that Webex provides local media support. Currently, this list includes the United States, Canada, the United Kingdom, the European Union, Japan, India, and Australia.
Complex Call Events in Webex Workforce Optimization
Webex Workforce Optimization now unlocks the power of in-depth call analysis with our Complex Call Events feature! Dive deep into call transfers, conferences, consultations, and more to gain valuable insights into agent interactions and customer experiences. This feature enables integration of audio recordings, screen recordings, and metadata for thorough analysis. Stay tuned for the launch and look forward to enhancing your Quality Management practices!
Remove the dependency of Contact WrapUp Events
We will enhance the CAR records to include a new Activity State for WrapUp complete. The string for new activity state will be 'wrapup-completed'. This does not impact any existing calculation or reports.
Support for Webex Calling WebRTC endpoints for Webex Contact Center agents
Agents using the Webex Contact Center Agent Desktop can login using a Webex Calling WebRTC endpoint. The agents can receive, make, and control calls in the same way as the DN logins or extensions with a physical endpoint.
Support of Webex Local Gateway PSTN for WebRTC agent calls
With WebRTC support for the agent leg in the Agent Desktop, agents can receive and make calls through PSTN supplied through a Webex local gateway.
Enhanced Clarity with Background Noise Removal for Contact Center Agents
Webex Contact Center is set to enhance customer-agent conversations with the introduction of advanced background noise removal technology. This new feature is designed to mitigate the challenges agents face when excessive noise from a customer's environment impacts call quality. Utilizing state-of-the-art deep learning, speech science, and audio processing techniques, the system effectively isolates human speech and eliminates distracting background sounds from incoming voice media streams.
The background noise removal will not be active during Agent outdial calls to ensure that music on hold and IVR prompts remain unaffected. Should the noise removal function too aggressively, organizations may request that the feature is disabled to suit their specific needs.
This improvement will be accessible to all Flex 3 agents, including Premium and Standard, within Webex Contact Centers that offer regional media support on the Next Generation media platform.
Secure Global Variables
Customer data protection and privacy are critical components for any business because they help to safeguard sensitive and confidential information from unauthorized access, disclosure, and modification. Security remains the topmost priority for Cisco products and hence this feature will introduce tighter control in handling sensitive PII, PCI and PHI data within the solution. This feature will include a new toggle “Mark Sensitive Information” within the Global variables which will restrict the Global variables to be made available in any logs, analyzer reports or desktop logs. These variables will only be decrypted at the agent desktop for agent viewing. This feature provides the control to admins to handle the sensitive data for Voice interactions.
Enhanced Collaboration in Webex Contact Center Multi-Party Calls
We are enhancing the behaviour of calls within Webex Contact Center to prolong the interaction until all parties have left, allowing all participant to complete their conversations, finishing any notes and agreeing appropriate actions. As an example, if a Patient calls to talk to a Doctor and a Nurse, and then drops after an initial consultation, the medical professionals will be able to complete their analysis before dropping themselves.
This will provide greater flexibility to our Customers in how they interact and relate to their Customers in turn.
What this means to you
- Increased Flexibility: Offer greater control to your customers by allowing them to determine call duration based on their specific needs.
- Enhanced Operational Efficiency: Streamline workflows by ensuring complete call resolution before disconnection, reducing unnecessary call backs.
Introducing Dedicated Flow Designer Documentation on Webex Help Center
Flow Designer documentation will now be available in a dedicated section on Webex Help Center. This new structure provides administrators and developers easy access to comprehensive and focused information about the Webex Contact Center Flow Designer platform. By migrating the documentation from the broader Setup and Administration Guide to a standalone article, we are enhancing searchability in locating specific information. Key updates include revised links in the Control Hub and Flow Designer help icons, ensuring seamless navigation to the new documentation location.
Consult, conference or transfer voice calls to experts within your Webex organization with Presence lookup
Empower your agents with the right expertise. Presence lookup will make it easy for your agents to find and connect with experts within your Webex organization. With a simple search by name and real-time availability, they'll be able to find the perfect experts to assist customers, ensuring a high-quality customer experience.
Lightning-Fast PSTN Switching for Webex Contact Center
This upcoming feature of Webex Contact Center will deliver a convenient and rapid PSTN switching process through advanced automation, drastically cutting down the time required to complete the switch. This feature will automate the PSTN switching process, eliminating the need for manual intervention. It significantly enhances the efficiency of the process by reducing the execution time from days to around 5 minutes depending on your configurations. Additionally, it minimizes the need for service requests and manual work, freeing up your team to focus on more critical tasks.
Stay tuned for this exciting update that will significantly enhance the efficiency and convenience of your PSTN switching process.
PII Masking Capabilities for Improved Security and Privacy in Customer Communications
Cisco will introduce the arrival of robust Personal Identifiable Information (PII) masking capabilities within your security configurations. Enhanced privacy measures are being introduced to ensure that all customer personal information remains confidential during every agent interaction with the customer across voice and digital channels, reinforcing your commitment to security and trust.
Get Started with Contact Center
A guided admin experience for Contact Center is coming to Control Hub. Admins will be able to follow a comprehensive guided journey to set up global Control Hub settings, Contact Center User settings, and Contact Center Routing settings needed for new tenants. Completing this guide will have your new tenant's voice channels ready for use, with an agent fully onboarded. Existing tenants will also have access to this guide, although many of the steps may already be marked as completed.
Add Multiple Subscriptions to the Same Tenant
Customers will be able to have multiple subscriptions on the same Webex Contact Center and Hybrid tenant in Control Hub. This will enable customers to have multiple subscriptions with different billing terms. Customers will also have the flexibility to put agents, CCAI, and WFO on separate subscriptions with different billing terms.
Maximize Return on Investment with New CRM Connectors for Salesforce, Microsoft Dynamics 365, and ServiceNow
Simplify management and boost agent efficiency with our new CRM Connectors, which help in streamlining your tasks. User provisioning, configuration, and enabling new features are now more efficient and user-friendly. With enhanced security, performance, and rich data transfer capabilities, your agents can deliver top-notch customer experiences effortlessly.
Queue-based reports
Queue-based reports (QBR) introduce three new stock reports in Analyzer. These reports deliver comprehensive insights and metrics at the queue level, covering call flows and interactions as they are presented, handled, transferred, and consulted across queues. Additionally, a new repository, based on Queue Records, will be available for reference.
Planned Features
Flow Designer Canvas Enhancements for Streamlined Development
The Webex Contact Center Flow Designer plans to feature a suite of Canvas Enhancements designed to supercharge the productivity of flow developers and administrators.
-
With the new Undo/Redo capability, flow developers can effortlessly backtrack or reapply changes, ensuring a smooth and error-free flow creation process.
-
The Auto Arrange feature instantly organizes your canvas, promoting clarity and maintainability of complex flows.
- The ability to Copy/Paste across different flows or subflows simplifies refactoring, promotes reusability, and fast-tracks subflow creation.
-
The newly available keyboard shortcuts make it easy to navigate between actions seamlessly, significantly improving the developer experience and bringing a more intuitive design experience that allows users to focus on innovation rather than configuration.
Ability to Send Outbound Digital Messages from Flow Designer
The Webex Contact Center Flow Designer plans to feature the ability to send outbound messages directly from within the Flow Designer, using new Digital Messaging activities. This simplifies the integration of digital channels, such as SMS and email, into voice flows, eliminating the need for separate design environments and complex workarounds. This allows Developers and administrators to effortlessly incorporate digital messaging into their customer engagement workflows, providing a seamless omnichannel experience.
Introducing Support for Custom Code with Inline JavaScript on Flow Designer
The Webex Contact Center Flow Designer plans to include a new "Code" activity, which brings the ability to add inline custom code using JavaScript directly within the Flow Designer. This powerful addition enables flow developers and administrators to leverage a popular programming language for data parsing, executing custom scripts, and making HTTP requests within their workflows. This feature greatly extends the use cases for JSON manipulation and data management, significantly enhancing the customization and automation capabilities of the Flow Designer. Additionally, the activity features enhanced input and output mappings to flow variables, allowing for seamless data exchange and parsing.
Introducing Flow Templates for Webex Contact Center Flow Designer
Webex Contact Center Flow Designer will introduce Flow Templates, designed to streamline the flow creation process by providing out-of-the-box flows for common use cases. With Flow Templates, developers will be able to select from a curated collection of Cisco flows, each tailored to various use cases and complexities. With this new experience, developers will be able to choose a template, make a few configurations, and move straight to testing and deployment. Flow Templates reduce the learning curve, decrease design time, and help developers implement best practices by offering a rapid, reliable path from design to execution.
Invoke Webex Contact Center APIs from Flow Designer
Webex Contact Center public APIs available as a part of the Developer portal can be invoked from the Flow Designer. This feature enables you to orchestrate use cases that can increase operational efficiency and allows you to use your creativity to solve unique business problems.
Flow Analytics for Webex Contact Center Flow Designer
Flow Analytics offers a visual representation of contact traversals through activities and flow paths. It provides current and historical views for in-depth analysis. With visualizations of flow paths, summary statistics, and insights into error paths, Flow Analytics will help Administrators and flow developers identify and resolve potential issues that can affect the customer experience. Users will also be able to drill down into individual interactions per activity for better insights. This feature is designed to help optimize flows, improve containment rates, and enhance the overall customer experience in the contact center.
Incorporate Version Labels for Enhanced Logic in Flow Designer
Flow developers will now have the the ability to modify flow logic dynamically by accessing Version Labels within the flow, using the NewPhoneContact activity. The activity has been enhanced with a property that displays the Flow Version Label currently in execution: whether Dev, Test, Live, or Latest. This enhancement enables crafting custom logic tailored to the flow's Version Label. This significantly boosts the testing and design flexibility, supporting the use of a consistent flow across various stages-Development, Testing, and Live-depending on the context of execution.
Migrate Contact Center Express (CCX) configuration to Webex Contact Center
This feature enables Contact Center Express (CCX) customers to move CCX configurations to their Webex Contact Center (Webex CC) tenant on Control Hub either automatically or manually. To do it manually, download a configuration extraction tool, execute it on the CCX deployment, and then import the extracted data to Webex CC using bulk operations. For an automatic option, access it through the tools section on CCX Admin UI. This method needs Cloud Connect to be set up between CCX and Control Hub. Once the configuration migration tool runs on CCX admin, data is automatically transferred to Control Hub. Administrators can then import the files using bulk operations.
Extraction of SIP Headers
Calls routed through the Webex Contact Center may contain custom headers carrying important information from PSTN or other telephony services. Customer header fields that are extracted from these messages are available in Webex Contact Center Flow Designer and may be used in the flow logic, stored in the MI, or displayed to the Agent. This feature is important when linking Webex Contact Center to external and On-Prem systems.
Status Indicator for Agent Desktop using WebRTC
This feature is in Limited Availability (LA) only in Europe and ANZ.
As a part of WebRTC integration with Webex Contact Center Agent Desktop, a new status indicator is introduced. When an agent logs in using a browser, the status indicator displays the status of the voice channel as up, down, or in a connecting state.
Multiregion and Auto-answer support for WebRTC agents (Early Access in the U.S., ANZ, and Europe)
The enhanced WebRTC supports agents to work in a multiregion architecture and provides auto-answer capabilities for inbound and outbound calls. Agents that are based in a specific region can now log in to an organization that is based in a different region. Enabling auto-answer for inbound calls streamlines agent call handling. Also, outbound calls are enhanced to provide a better experience for the agent, minimizing delays and latency.
If you are a customer in the U.S., ANZ, or Europe and want to participate in the Early Access program, contact your Cisco Partner for more details.
WebRTC support for Agent Desktop in Canada
WebRTC extends its support for Agent Desktop in Canada. It complements the WebRTC support that exists in the U.S., Europe, and ANZ regions.
The WebRTC feature allows agents to use the Agent Desktop with a headset without an external phone or extension number. It leads to greater freedom and flexibility when deploying agents within the Cisco Contact Center environment. Agent Desktop supports all the current voice functionalities such as hold, retrieve, transfer, conference, mute, auto-answer, and dial pad to facilitate browser-only use.
Allow Contact Center customers to move their non Contact Center Webex Data across regions
With this enhancement Webex Contact Center customers can move their Organization's Webex data across the regions by performing the steps document in Migrate your organization’s Webex data article. As of today, partners and customers using Contact Center service can’t use this feature. This enhancement doesn’t impact the data of tenant in Contact Center as the data continues to reside at the location selected during provisioning.
Customers on Contact Center 1.0 should upgrade to the latest Webex Contact Center service to use this enhancement.
Supervisor desktop
-
The Team Performance Details page operates at optimum performance for up to 500 agents. A supervisor with access to more than 500 agents might not experience the best performance with the Team Performance Details page.
-
When agent 2 is conferencing into a call that is being handled by agent 1, agent 2’s details does not show all the call metadata. Also, when agent 2 is consulting with agent 1, the call details are not available on agent 2’s active interaction details modal. These issues will be fixed in a future release as an enhancement.
-
The default layout Cisco provides to the Global Layout section doesn’t support cross launching the Webex app. As an alternative, you can customize any of the layouts to add the cross-launch option.
-
When conferencing with a dial number mapped to an entry point wherein 2 agents - agent1 and agent2 are conferencing, the second agent’s contact status displays “Connected” instead of “Conferencing” in the Team Performance Details page. Note that consulting and conferencing a dial number mapped to an entry point is still in limited availability.
-
There are differences in data between Supervisor Desktop reports and Homepage. For more information, see Comparison of KPI Cards in Supervisor Desktop and Analyzer.
-
Supervisors must have unique number assignments. Supervisor1 signs into the Supervisor Desktop with a number. Supervisor1 needs to sign out and sign in with a different number, so that Supervisor2 can sign into Supervisor Desktop with the same number used by Supervisor1. If you use the same phone number for different supervisors, contact your account team, partner, or Cisco support for assistance.
-
To save the Inactivity Timeout setting on Control Hub, you must enter a value for the Auto Wrapup interval setting. However, this isn't applicable when you use the Management Portal for tenant level settings.
Courtesy callback routing to capacity-based teams is not supported
Courtesy callback isn't supported with capacity-based teams (CBT). CBTs have no individual agents assigned to them, and courtesy callback requires an Agent ID to function. Therefore, if courtesy callback flows to an entry point or a queue served by a CBT, the call fails.
September 25, 2024
End of support for VPOP provisioning for new Webex Contact Center tenants
The Webex Calling PSTN services add-in for Webex Contact Center was introduced earlier this year. This add-in allows Webex Contact Center customers to selfprovision SIP trunk connections directly in Webex Control Hub using Local Gateway functionality.
The Local Gateway replaces functionality previously provided by VPOP for new customers. The add-in also provides Contact Center customers access to Cisco Cloud connected PSTN providers.
With the general availability of the Webex Calling PSTN services add-in, Cisco will be removing the ability to provision new VPOP based contact centers. For all new Webex Contact Center orders Control Hub can be used to provision telephony integration.
This change won’t affect existing VPOP customers who can continue to use VPOP integrations currently. Cisco will communicate directly with VPOP customers in the future as Cisco transitions VPOP services.For more information on Webex Contact Center telephony integration, see Set up voice channels for Webex Contact Center.
September 4, 2024
End of Service announcement for Webex Contact Center Legacy Media Platform
Webex Contact Center introduced its next generation voice media platform over two years ago. The Real Time Media Service (RTMS) has delivered many new capabilities to our customers, including regional media support, WebRTC based agents and caller background noise removal.
Over the last year, Cisco has been transitioning customer onto this new platform. This process is now almost complete and therefore we are announcing the retirement of our legacy voice media platform. The last day of operation for the legacy media platform will be 30th November 2024. All customers must have completed their transition to Real Time Media Service (RTMS) before this date.
Customers can check their operational media platform in Webex Control Hub. Selecting “Contact Center” and then “General” from Tenant Settings will show the current voice media platform. Current voice media platform should read “Real Time Media Service”. If this field contains any other value, please contact your partner or customer success manager with urgency to facilitate your transition to RTMS.
July 25, 2024
Exciting Update: Webex Contact Center Licensing Consumption and Reporting
We are pleased to announce an important update on Webex Contact Center Licensing Consumption and Reporting.
This updated article now includes enhanced sections on Viewing Usage and How is Usage Determined?. Additionally, we've introduced a new Frequently Asked Questions section to address common inquiries. This section covers topics such as the capabilities and limitations of surge protection, and clarifies that while it is currently not possible to entirely prevent overage charges, efforts are underway to develop a solution.
As mentioned in the article, these updates will be available across all Webex Contact Center data center regions by August 2024.
Thank you for your continued support as we strive to provide you with the most comprehensive and transparent service possible.
July 17, 2024
Discontinuation of Routing Strategies for New Tenants
Webex Contact Center will be discontinuing support of Routing Strategies for any new tenant onboarded on or after July 17, 2024. We recommend new tenants use Business Hours as an alternative. Existing customers may continue to modify their routing strategies; however, we strongly recommend managing schedules through Business Hours for existing customers as well. We will announce the dates for deprecating the Routing strategies soon and will give appropriate time for customers to transition to business hours. Until then, there will be no impact to the Routing Strategies functionality for existing customers.
For more information on Business Hours, see Set up business hours for Webex Contact Center.
May 29, 2024
Removal of 'Custom Attribute'
We are streamlining our recording management portal to enhance your experience. As part of this effort, we have phased out the custom attributes feature. You can take advantage of our tagging system. Tags offer a similar experience, enabling you to easily organize and identify your recordings.
February 22, 2024
Introducing Persona-Based What's New: A Customized Approach to Product and Service Updates
We are excited to announce a significant enhancement in how we deliver updates about our products and services. To provide you with the most relevant and targeted information, we have transitioned from a consolidated "What's New" article to persona-based "What's New" articles specifically tailored for Administrators, Supervisors, and Agents. This new approach offers key benefits such as personalized content, streamlined updates, and enhanced clarity. You will receive updates that are directly pertinent to your persona. This means no more sifting through information that may not apply to you.
December 18, 2023
Migration of Webex Contact Center 2.0 Guides from Cisco Product Support Page to Help Center
The Webex Contact Center 2.0 Guides that were published on Cisco product support page are now available directly from the Help Center.
So, from now on, when you click on these guides from the Cisco product support page, you'll be redirected to their respective articles in the Help Center. Here are the guides that have been moved:
September 26, 2023
End of support announcement for native chat and email channels
Webex Contact Center announces end of support for its native chat and email channels by Dec 31, 2023. We recommend that customers who have currently deployed these channels for their business to upgrade to new digital channels. These new digital channels include Web chat, Email, SMS, Facebook Messenger, and WhatsApp, designed with smart and secure capabilities. Work with your Account Manager for licensing and deployment options. For more information about the new digital channels, see Webex Contact Center New Digital Channels.