For more information about these new features, see Analytics for Your Cloud Collaboration Portfolio, Reports for Your Cloud Collaboration Portfolio, and Advanced Diagnostics and Troubleshooting in Control Hub.

June 2021

Search and Filter Participants in Diagnostics

You can now search for a specific participant or filter participants by a certain category when looking at the meeting details page.

Max Latency and Average Packet Loss Details

You can now see the maximum latency and the average receiving packet loss of participants in Diagnostics. Both of these metrics are captured every minute. These metrics can help you figure out where the source of network issues is coming from faster.

Highlighting where you can find max latency, receiving, and end to end call in Diagnostics

Events Report

A new report that provides historical data for events hosted in Webex Events (new) is now available for you to download. You can use this report to get a list of all the past events hosted in your organization to find out the event ID, who the host was, when the event started and ended, if it was a webcast or event, and more.

Real-Time Data for Audio tab in Meetings Analytics

The Audio tab in Meetings Analytics now has near real-time data available within 10 minutes of when a meeting starts, just like the Engagement, Participants, and Quality tabs.

Meeting Analytics Multi-Site Selection

You can now combine Meetings data from multiple Webex sites into one dashboard with the Webex site selection in Meetings Analytics.

Improved Navigation for Reports

The Reports tab in Analytics now has its own section under Monitoring on the left navigation of Control Hub.

Location of new navigation for Reports tab

Updated Quality Data in Meetings Attendees Report

The Meetings Attendees report now shows each participant's media quality metrics like the max and average packet loss, jitter, and latency, hardware, CPU information, data center that they connected to, and the client type and version used to join the meeting.

The following column names have also been renamed:

  • CLIENT_IP to LOCAL_IP

  • GATEWAY_IP to PUBLIC_IP

  • VOIP_PACKET_LOSS to VOIP_RECEIVING_AVERAGE_PACKET_LOSS

  • VOIP_LATENCY to VOIP_AVERAGE_LATENCY

In addition, the calculation for VOIP_RECEIVING_AVERAGE_PACKET_LOSS and VOIP_AVERAGE_LATENCY have been changed to align with the same calculation in Analytics and Troubleshooting. The following table compares the previous and updated column names for the Meetings Attendees report.

Table 1. Column Names Comparison for Meetings Attendees Report

Previous Column Names

Updated Column Names

MEETING_NUMBER

MEETING_NUMBER

MEETING_NAME

MEETING_NAME

CONFERENCE_ID

CONFERENCE_ID

USER_NAME

USER_NAME

EMAIL

EMAIL

LOCATION

LOCATION

JOIN_DATE

JOIN_DATE

START_TIME

START_TIME

END_TIME

END_TIME

DURATION

DURATION

OS

OS

BROWSER

BROWSER

CLIENT_IP

LOCAL_IP

GATEWAY_IP

PUBLIC_IP

JOIN_MEETING_TIME

JOIN_MEETING_TIME

VOIP_PACKET_LOSS

VOIP_RECEIVING_AVERAGE_PACKET_LOSS

VOIP_LATENCY

VOIP_AVERAGE_LATENCY

TCP_PERCENTAGE

TCP_PERCENTAGE

UDP_PERCENTAGE

UDP_PERCENTAGE

IS_CMR

IS_CMR

IS_SHARING

IS_SHARING

IS_RECORD

IS_RECORD

VIDEO_MINUTES

VIDEO_MINUTES

CLIENT

CLIENT_VERSION

MEDIA_NODE

CONNECTION

HARDWARE

CAMERA

MICROPHONE

SPEAKER

VOIP_AVERAGE_LATENCY

VOIP_MAX_LATENCY

VOIP_RECEIVING_AVERAGE_PACKET_LOSS

VOIP_RECEIVING_MAX_PACKET_LOSS

VOIP_SENDING_AVERAGE_PACKET_LOSS

VOIP_SENDING_MAX_PACKET_LOSS

VOIP_RECEIVING_AVERAGE_JITTER

VOIP_RECEIVING_MAX_JITTER

VOIP_SENDING_AVERAGE_JITTER

VOIP_SENDING_MAX_JITTER

VIDEO_AVERAGE_LATENCY

VIDEO_MAX_LATENCY

VIDEO_RECEIVING_AVERAGE_PACKET_LOSS

VIDEO_RECEIVING_MAX_PACKET_LOSS

VIDEO_SENDING_AVERAGE_PACKET_LOSS

VIDEO_SENDING_MAX_PACKET_LOSS

VIDEO_RECEIVING_AVERAGE_JITTER

VIDEO_RECEIVING_MAX_JITTER

VIDEO_SENDING_AVERAGE_JITTER

VIDEO_SENDING_MAX_JITTER

CPU_APPLICATION_AVERAGE

CPU_APPLICATION_MAX

CPU_SYSTEM_AVERAGE

CPU_SYSTEM_MAX

April 2021

Redesigned Analytics: Calling and Messaging

We're adding redesigned analytics for messaging and calling, expanding a better analytics experience across the suite of services. The Analytics pages are designed with a user-friendly layout showing key performance metrics, contextual filtering, and faster load times.

Revamped Video Mesh Analytics Page

The Video Mesh Analytics page is getting updated with separate KPIs for the Engagement, Resources, and Bandwidth Usage tabs, updated charts with more detailed data, and faster load times for the data.

Video Mesh Engagement Tab Redesign

Added the following KPIs that provide data on activities used during meetings:

  • Total Call Legs

  • On-Premises Call Legs

  • Cloud Call Legs

  • Overflowed to Cloud Call Legs

Video Mesh Engagement KPIs

The Call Join Overview and Call Join Activity charts have been updated to the Call Legs by Cluster Type and Call Legs by Cluster Type Trend charts.

Updated Video Mesh Engagement Call Legs by Cluster Type Chart

The Client Type Overview and Client Type Usage charts have been updated to the Call Legs by Endpoint Type and Call Legs by Endpoint Type Trend charts.

Updated Video Mesh Engagement Call Legs by Endpoint Type

The Meeting Resources Overview and Meeting Details charts have been updated to the Meeting Connections by Call Legs and Meeting Connections by Call Legs Trend.

Updated Video Mesh Engagement Meeting Connections by Call Legs Chart

Video Mesh Resources Tab Redesign

Added the following KPIs that provide data on Video Mesh clusters in your organization:

  • Avg Cluster Availability

  • Overflowed to Cloud Call Legs

  • Redirected Call Legs

Video Mesh Resources KPIs

The Percentage of Node Availability Per Cluster, Node Availability Across On-Premises Clusters, and Nodes in Service charts have been updated to the Cluster Availability by Percentage, Cluster Availability by Node, and Node Availability charts.

Updated Video Mesh Resources Cluster and Node Availability Charts

The Overflow to Cloud chart has been updated to the Call Leg Overflows to Cloud by Cause and Call Leg Overflows to Cloud by Cause Trend charts.

Updated Video Mesh Resources Call Leg Overflows to Cloud by Cause Charts

The Call Redirects chart has been updated to the Call Leg Redirects by Cause and Call Leg Redirects by Cause Trend charts.

Updated Video Mesh Resources Call Leg Redirects by Cause Charts

The Call Distribution Overview and Call Distribution Across On-Premises Clusters charts have been updated to the Maximum Call Distribution by Cluster and Maximum Call Distribution by Cluster Trend charts.

Updated Video Mesh Resources Maximum Call Distribution by Cluster Charts

The Resource Utilization Overview and Resource Utilization charts have been updated to the Average Resource Utilization by Cluster and Average Resource Utilization by Cluster Trend charts.

Updated Video Mesh Resources Average Resource Utilization Overview Charts

Video Mesh Bandwidth Usage Tab Redesign

Added the following KPIs that provide data on the usage of Video Mesh clusters in your organization:

  • Total Data Usage

  • Transmitted Data Usage

  • Received Data Usage

  • Audio Data Usage

  • Video Data Usage

Video Mesh Bandwidth Usage KPIs

The Total Cascade Bandwidth Usage chart has been updated to the Total Cascaded Data Usage by Cluster and Total Cascaded Bandwidth Usage by Cluster Trend charts.

Updated Video Mesh Bandwidth Usage Total Cascaded Data Usage Charts

The Cascade Bandwidth Usage chart has been updated to the Total Cascaded Data Usage by Data Transmission and Total Cascaded Bandwidth Usage by Data Transmission Trend charts.

Updated Video Mesh Bandwidth Usage Total Cascaded Data Usage by Data Transmission Charts

The Cascade Bandwidth Usage Across Streams chart has been updated to the Total Cascaded Data Usage by Stream and Total Cascaded Bandwidth Usage by Stream Trend charts.

Updated Video Mesh Bandwidth Usage Total Cascaded Data Usage by Data Stream Charts

Revamped Reports and Report Scheduler

The Reports page was revamped to provide you with an easy-to-read catalog of reports that are available for you to download. You can also now schedule reports to run automatically in a daily, weekly, or monthly format instead of manually running a report each time.

Meeting Network Quality Trending Alert

The Meeting Network Quality Trending alert inspects the quality of all meetings at the end of each day and then sends out an alert if the average network performance is trending down. You can use this alert to catch possible network issues early so that future meetings can run smoothly.

Cloud-Registered Video Device Support and Average System CPU for VIP Live Meeting Quality Issue Alert

You can now monitor room devices and set a threshold for average system CPU with the VIP Live Meeting Quality Issue alert.

Febuary 2021

Revamped Meetings Analytics Engagement Page

The Meetings Engagement page was revamped with separate KPIs and is now split into two tabs, Engagement and Participants. The Engagement tab shows KPIs and metrics for the types of activities that participants did during meetings. The Participants tab shows KPIs and metrics for how participants joined meetings.

Meetings Engagement Tab Redesign

Added the following KPIs that provide data on activities used during meetings:

  • Total Meetings

  • Total Meeting Minutes

  • Total Video Meetings

  • Total Sharing Meetings

  • Total Recording Meetings

The Usage by Meetings and Usage by Activity charts have been combined into the Meetings by Activity chart. This chart also captures data for when a meeting was recorded.

Two new Meeting Minutes by Activity charts have been added. These charts show how many minutes each activity was used for during meetings.

New Meetings Participants Tab

Added the followings KPIs that provide data about hosts and participants:

  • Total Meetings

  • Total Unique Hosts

  • Total Participants

The Join Method chart has been updated to the Participants by Join Method charts.

The Participants by Roles chart has been updated with a new look and now captures hosts and attendees instead of hosts and participants.

The Usage by Location chart has been updated to the Participants by Join Location charts.

The Usage by Participant Minutes chart has been updated to the Participant Minutes chart.

Revamped Meetings Analytics Audio Page

The Meetings Audio page was revamped with separate KPIs and metrics for VoIP minutes, telephony minutes, and audio-only meetings, plus more trending charts with summary statistics. The added KPIs are:

  • Total Audio Minutes

  • Total VoIP Minutes

  • Total Telephony Minutes

The Audio Sources chart has been combined into the Audio Usage By Type chart.

The Participant Details table has been removed and is now available as the Webex Attendee report in the Reports tab. You can also download the Webex Meeting Audio Usage report for audio details.

Webex Assistant for Meetings Indicator in Webex Meeting Report

You can now see which meetings had the Webex Assistant for Meetings enabled in the Webex Meeting report.

January 2021

View Quality Data for Breakout Sessions

You can now see quality data for breakout sessions within a meeting. The blue line at the top of the timeline represents a breakout session. Click on the blue line to see which participants joined the breakout session and how long they were in there for to help you isolate issues within a specific breakout session.

View Which Participant Paired With a Device

When a participant uses a device or connects through PSTN to join a meeting, the name of the participant now shows up under the device. This helps you see which participants paired with which device, making it easier for you to reach out to the correct participant to assist them.

We're sharing details about our planned releases, but keep in mind that we might need to make changes to release dates and the features themselves. You can subscribe to this article to get updated about any changes.


These features will not yet be available in Webex for Government unless specfically stated.

July 2021

Unified Search for Webex Meetings and Webex App to Webex App Calls

You will now be able to search for direct calls made using Call on Webex in Diagnostics.

Support for Webex Events (New) and Webex Events (Classic) in Diagnostics

You will now be able to view quality data for events from both Webex Events (new) and Webex Events (classic).

New Devices CSV Report

A new report that provides historical data about the devices set up in your organization will be available for you to download.

Virtual Background and Breakout Sessions Indicator in Reports

The Meetings Attendees report will be updated to include a column that lets you know when attendees used a virtual background and if they joined a breakout session.

August 2021

Indicator for Noise Removal and Virtual Background in Diagnostics

A new indicator will be added in Diagnostics to let you know when participants enabled the Noise Removal feature or used a virtual background.

Indicator for Slido App

A new indicator will be added in Diagnostics to let you know when participants used the Slido integration during meetings.

Auto Refresh for Live Meetings in Diagnostics

When you're looking at a meeting that's in progress, quality data will now be updated automatically without having to refresh the page.

Webex for Government: New Features for Analytics, Diagnostics, and Reports

Analytics for Meetings, Messaging, and Devices, Diagnostics, and Reports for Webex for Government organizations will now be updated to the latest designs that matches up to the July release in commercial organizations.


Diagnostics won't support data for Join Meeting Time and Webex Events (new), and Reports won't have API support for now.

Analytics

Revamped Meetings Analytics Quality Page

The Meetings Quality page in Analytics was revamped with real-time network quality KPIs and metrics for VoIP, video, and join meeting time (JMT), plus more trending charts with summary statistics. IT admins can view real-time data, identify users with repetitive network quality issues, and cross launch into Troubleshooting to address quality issues.

Check out the Meeings Redesigned Quality infographic to see all the new stuff that's available to you.


You must be on a Webex site version 40.6 or later to view the Meetings Redesign tab.

Microsoft and Slack Integration Support in Meeting Report

You can now see if a meeting was scheduled through Microsoft Teams or Slack in the Webex Meeting report if your organization has set up those integrations. This column helps you track and quantify integration usage for Webex Meetings.

Reports REST API

You can now create your own reports with our new Analytics Reports Rest APIs. This allows you to have access to pull large-scale data into your own business intelligence system.

For more information, see the Reports API or Report Templates API developer page.

Diagnostics

Meeting Qualities REST API

You can now access up to 14 days of Live Meetings and Post Meetings details data with the new Meeting Qualities REST API. Per minutes quality metrics are also available similar to the data presented in the Troubleshooting tab. This API provides you with a scalable and programmatic access to meetings and participants details, including per minute network quality data in real time.

For more information, see the Meetings Qualities developer page.

Analytics

Webex Future Scheduled Meetings Report

This report shows you the upcoming meetings within the next 90 days for a selected Webex site. Use this report to gain insights into how many users are scheduling meetings and understand the volume and timing of upcoming meetings. This information can help you manage the timing of a site migration or a site upgrade that might impact users. You can also identify critical meetings or events to help plan support accordingly.

Webex High CPU Report

This report shows you if participants had an average system CPU usage of 90% or higher for at least 25% of their video minutes during meetings. A high system CPU usage could cause those participants to have a lower quality meeting. You can use this report to help users on how they can reduce their system CPU usage to have a better meeting experience.

Diagnostics

Monitor All Participants with the VIP Live Meeting Quality Issue Alert

The VIP Live Meeting Quality Issue alert can now monitor all the participants in the same meetings as the users that you created the alert for.


This option is off by default. If you have an existing VIP Live Meeting Quality Issue alert set up already, then this option will be automatically turned on the next time you edit the alert.

Transport Protocol Change Indicator

You can now see when a participant changes from UDP to TCP during a meeting by hovering over the purple diamond icon in the Meeting Details view and Participants Details view.

A change from UDP to TCP is usually an indication of unstable network connection, which may impact a participant's audio and video quality. You can use this information to help triage audio and video related problems for those participants.

Analytics

Devices Analytics Revamp

We updated the Devices tab with new key performance indicators (KPIs) and charts to help you monitor how cloud-registered devices are being used in your organization.

Webex Assistant for Devices Data

You can now view usage data for the Webex Assistant for Devices. This data helps you get insights on how users are interacting with the Webex Assistant, and how you can help users engage with it more often.

Diagnostics

Proactive Notifications

You can now set up alerts to notify you whenever participants reach a specific packet loss, jitter, or latency threshold during Webex meetings. You'll get an email with the meeting details that the participant is in so you can jump in and provide troubleshooting support.


You must be a full administrator, and have a Webex site that's on version 40.4.0 or higher to set up alerts. Alerts only trigger for participants who attend meetings through the Webex Meetings and Webex Teams app. The minimum app versions that participants must use are:

  • Webex Meetings desktop app version 39.6.5 or higher.

  • Webex Meetings mobile app version 39.11 or higher.

  • Webex Teams desktop version 3.0.12427.0 or higher.

  • Webex Teams Android app version 4.1.6 or higher.

  • Webex Teams iOS app version 4.3 or higher.

View Live Meetings

You can now see a list of all the meetings that are in progress for a Webex site. This list allows you to proactively monitor and troubleshoot meetings that may have issues.


You must be a full administrator, read-only administrator, or support administrator with the Advanced Troubleshooting Access role to view live meetings.

Join In Progress Meetings

You can now join meetings that are in progress with just the click of a button in the Meeting View of Troubleshooting. This feature lets you quickly help out participants who are having trouble during a meeting.


You must be a full administrator with the Advanced Troubleshooting Access role to join in progress meetings.

Analytics

Meetings Usage Summary Report

This report shows you the details of all the meetings held in your organization for each day. At a quick glance, you can find out the total number of meetings and participants, and the total number of VoIP, PSTN, and video participant minutes for a specific date.

Teams Client Version Report

Want to find out who’s not clicking that update button? The Teams Client Version report shows you which Webex Teams client version users are on. Users on older versions don't have all the up-to-date features and fixes, so you can help them with their problems by finding out if it’s because of the version they're on.

Teams Summary - Bot Activity Report and Teams Summary - User Activity Report

Similar to the Teams Bots Activity report and Teams User Activity report, these reports show you a summarized view of the data for the selected date range instead of the data for each day. Use this report if you want to get a high level view of how effective bots are, and how users are adopting Webex Teams.

True Forward Active User Report and True Forward Enterprise Agreement Report

These two True Forward reports show you your subscription information for your product, and how many licenses you've allocated to users. If you went over your provisioned license quantitiy, you can track the consumption quantitiy in the report to give you an idea on how your subscription will change.


These reports are only available to customers that have an active true forward eligible subscription.

Webex Meeting Audio Usage Report

This report shows you the details of the different audio types used by participants during meetings within a selected date range. You can use this report to get insights on which audio type is the most used in your organization.

Reports Available for Standard License

Customers with a standard license for Control Hub now have access to three months of data for:

  • Webex Meeting Usage Summary Report

  • Webex Active_Hosts Report

  • Webex Inactive Users Report

  • True Forward - Active User Rolling Average Report

  • True Forward - Enterprise Agreement Report

Diagnostics

Webex Monitoring Service

The Webex Monitoring Service is now available in Control Hub. You can use this service to collect baseline data on your organization's network when using Webex services. This data can help you troubleshot meetings by seeing if problems are coming from your organization's network or from Webex data centers.

For more information, see how to set up the Webex Monitoring Service and how to view the Webex Monitoring Service data.

Mute Indicator

Ever had a moment in a meeting where you were talking, but didn't realize you were muted? We've all been there, which is why we added a mute indicator. This indicator helps you determine if participants had audio quality issues, or just forgot to click that mute button.


The mute indicator only shows for participants who mute themselves through the Webex Meetings desktop and mobile app, the Webex Teams desktop and mobile app, and cloud-registered room devices. If a participant was muted through an external hardware, like a microphone, then the mute indicator doesn't show.

Meeting End Indicator

We added an indicator that lets you know when a participant left a meeting on purpose or unexpectedly. When monitoring meetings, you can use this information to help troubleshoot problems if you notice that lots of participants are dropping from meetings unexpectedly.


The meeting end indicator only shows for participants who use VoIP to join meetings with the Webex Meetings app, the Webex Teams app, or a video system.

Memory Usage for Participants

You can now see the system and Webex app memory usage for participants in the Participant View. This information can help you figure out if participants are having trouble with their meetings due to their network connection or high memory usage.

Analytics

Cisco Webex Desk Pro and Cisco Webex Room Panorama Support

We now bring the power of analytics to two new devices, the Cisco Webex Desk Pro and Cisco Webex Room Panorama. You can use data from these new devices to see how they're being used across your organization and help drive adoption.

USB Passthrough Mode Data Support

The Cisco Webex Room Kit Mini has a mode called USB Passthrough, which lets anyone join a meeting with the device by connecting its USB cable to a computer. You can now see data for when the USB Passthrough mode is used to get a better understanding of how often the mode is used in your organization.

Active Devices Key Performance Indicator (KPI) for Devices Analytics

We've replaced the Online Devices KPI on top of the Devices Analytics page with the Active Devices KPI. Don't worry, you can still find out how many online devices there are in the Devices tab. Instead of showing you how many devices were just online, the Active Devices KPI provides a better insight by showing you how many devices were actually used in meetings based on the previous day, with a trending comparison from the past week. You can use this information to see how often devices are being used and see how you can increase adoption for your organization.

Tracking Codes in Webex Meeting Report

Tracking codes are now included in the Webex Meeting report in Analytics. Tracking codes help you analyze usage by different groups within an organization—for example, by department or division. Now that you can track these tracking codes in the report, you can use the data to help with adoption insights for cost accounting or other internal billing processes across different groups.

Teams Bots Activity Report

Bots in Webex Teams can improve productivity and help reduce costs, but how can you tell if they really do that? With the new Teams Bots Activity report, you can get metrics for these useful automated helpers, such as how many spaces a bot joined, how many messages a bot sent, how many files a bot shared, and more. These metrics help you see how effective bots are, or if they just want to be your friends.

Teams User Activity Report

Want to find out how people are using Webex Teams? Then check out the Teams User Activity report, which shows you how many spaces they're a part of, the number of files they shared, how many spaces they created, and more. These metrics help you analyze user activity patterns across your organization.

Diagnostics

3rd Party Session Initiation Protocol (SIP) Devices Support

Data from all devices should be equal, which is why Diagnostics now supports data from 3rd party SIP devices. You can get insights about how these devices are used to join a meeting and additional quality of service data that are updated within the meeting every minute.

Search Meetings with Names of Cloud-Registered Devices

Do you have devices that are registered up in the Webex clouds? If you do, then you can now search for any cloud-registered device by name in Diagnostics. This lets you see how often a device is being used and the quality data it experiences across multiple meetings.

Analytics

Cisco Jabber Analytics Data

Analytics data is now available for Jabber if your organization has:

  • On-premises Jabber with full Unified Communications.

  • On-premises Jabber with Instant Messaging-only.

  • On-premises Jabber with Phone-only.

  • Jabber with Webex Messenger.

You must also complete the configurations below so Jabber data is sent to Control Hub. The date for Jabber data in Control Hub starts once these configurations are complete. Jabber data doesn’t backfill.

The Key Performance Indicators (KPIs) that show at the top of the Jabber Analytics page to help you better understand Jabber adoption in your organization are:

  • Active Users.

  • Total Messages Sent.

  • Total Calls.

  • Screen Sharing.

Each of these KPIs show a trending percentage from the previous time period.

There are charts that show you a daily, weekly or monthly trend for total active users, total messages sent, total call minutes, and number of active users that made a call. You can also view a breakdown of:

  • Jabber client versions used.

  • Operating systems.

  • Chat types used.

  • Video call screen resolutions.

  • Audio or video calls made.

  • Connections made in or outside the organization's network.

This data helps you see how often Jabber is being used and helps you create reports.

Calendar Date Selector for Messaging and Devices

You can now use a calendar date selector to view data within a specific time frame for Messaging and Devices Analytics. The amount of data you have access to depends on the type of customer you are. If you're a standard customer, you have access to 3 months of data. If you're a Pro Pack customer, you have access to 13 months of data.


The KPIs in the Messaging and Devices tabs are fixed and don't change when you select a specific time frame. All other charts below the KPIs update based on the date you select.

Webex Edge for Devices Support

You can now see data for on-premises devices on release ID: RoomOS 2019-12-16 285a7f8edd1 or higher that linked to Webex Edge for Devices. Devices Analytics shows you a breakdown of how many devices have been used for calls, whiteboarding, and digital signage.

For more information about linking on-premises devices to the Webex cloud, see the Webex Edge for Devices White Paper.

Webex Meetings Inactive Users Report

You can now generate Webex Meetings Inactive Users Reports in Analytics. This report shows you a list of users who haven't hosted or attended Webex Meetings for a specific time period. You can use this report to help you see why those users haven't been using Webex Meetings, and what you can do to help them use it more.

Diagnostics

Thin Clients and Mobile Devices Support

You can now see rich troubleshooting data for users who join Webex meetings through thin clients or mobile devices.

These are the minimum Webex Meetings versions required in order to see troubleshooting data from users who join through thin clients and mobile devices. If the devices don't meet these requirements, then only packet loss and latency data are available.

Device

Minimum Webex Meetings Version

Mobile Devices

39.11

Thin Clients

40.1